1*4882a593SmuzhiyunThis configuration is intended as a base image. 2*4882a593SmuzhiyunIt includes kernel and firmware support for the common USB WiFi hardware. 3*4882a593SmuzhiyunPackages for WiFi support are up to the user, you'll probably want 4*4882a593Smuzhiyunone or more of: hostapd, iw, wireless_tools and/or wpa_supplicant. 5*4882a593Smuzhiyun 6*4882a593SmuzhiyunIt also pulls up the console on the serial port, not on TV output. 7*4882a593Smuzhiyun 8*4882a593Smuzhiyun=== Output files after building ============================================== 9*4882a593Smuzhiyun 10*4882a593Smuzhiyunoutput/images 11*4882a593Smuzhiyun+-- boot.vfat (VFAT kernel partition image generated by genimage) 12*4882a593Smuzhiyun+-- imx23-olinuxino.dtb (device tree blob) 13*4882a593Smuzhiyun+-- rootfs.ext2 (Root file system) 14*4882a593Smuzhiyun+-- sdcard.img (Complete SD card image generated by genimage) 15*4882a593Smuzhiyun+-- u-boot.sd (U-Boot image) 16*4882a593Smuzhiyun+-- uImage (Kernel binary) 17*4882a593Smuzhiyun 18*4882a593Smuzhiyun=== Use of generated SD card image =========================================== 19*4882a593Smuzhiyun 20*4882a593SmuzhiyunTo determine the device associated to the SD card have a look in the 21*4882a593Smuzhiyun/proc/partitions file: 22*4882a593Smuzhiyun 23*4882a593Smuzhiyun cat /proc/partitions 24*4882a593Smuzhiyun 25*4882a593SmuzhiyunThen, run the following command as root: 26*4882a593Smuzhiyun 27*4882a593Smuzhiyun*** WARNING! The command will destroy all the card content. Use with care! *** 28*4882a593Smuzhiyun 29*4882a593Smuzhiyun sudo dd if=output/images/sdcard.img of=/dev/<your-microsd-device> 30