1This configuration is intended as a base image. 2It includes kernel and firmware support for the common USB WiFi hardware. 3Packages for WiFi support are up to the user, you'll probably want 4one or more of: hostapd, iw, wireless_tools and/or wpa_supplicant. 5 6It also pulls up the console on the serial port, not on TV output. 7 8=== Output files after building ============================================== 9 10output/images 11+-- boot.vfat (VFAT kernel partition image generated by genimage) 12+-- imx23-olinuxino.dtb (device tree blob) 13+-- rootfs.ext2 (Root file system) 14+-- sdcard.img (Complete SD card image generated by genimage) 15+-- u-boot.sd (U-Boot image) 16+-- uImage (Kernel binary) 17 18=== Use of generated SD card image =========================================== 19 20To determine the device associated to the SD card have a look in the 21/proc/partitions file: 22 23 cat /proc/partitions 24 25Then, run the following command as root: 26 27*** WARNING! The command will destroy all the card content. Use with care! *** 28 29 sudo dd if=output/images/sdcard.img of=/dev/<your-microsd-device> 30