readme.txt
1A13-OLinuXino
2
3Intro
4=====
5
6This default configuration will allow you to start experimenting with
7the buildroot environment for the A13-OLinuXino. With the current
8configuration it will bring-up the board, and allow access through the
9serial console.
10
11For more details about the A13-OLinuXino:
12
13https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino/open-source-hardware
14
15How to build it
16===============
17
18Configure Buildroot:
19
20 $ make olimex_a13_olinuxino_defconfig
21
22Compile everything and build the rootfs image:
23
24 $ make
25
26Note: you will need access to the internet to download the required
27sources.
28
29How to write the SD card
30========================
31
32The sdcard.img file is a complete bootable image ready to be written
33on the boot medium. To install it, simply copy the image to a micro SD
34card:
35
36 # dd if=output/images/sdcard.img of=/dev/sdX
37
38Notes:
39 - replace 'sdX' with the actual device with your micro SDcard,
40 - you may need to be root to do that (use 'sudo').
41
42Eject the SD card, insert it in the A13-OLinuXino board, and power it
43up.
44