1*4882a593SmuzhiyunA13-OLinuXino 2*4882a593Smuzhiyun 3*4882a593SmuzhiyunIntro 4*4882a593Smuzhiyun===== 5*4882a593Smuzhiyun 6*4882a593SmuzhiyunThis default configuration will allow you to start experimenting with 7*4882a593Smuzhiyunthe buildroot environment for the A13-OLinuXino. With the current 8*4882a593Smuzhiyunconfiguration it will bring-up the board, and allow access through the 9*4882a593Smuzhiyunserial console. 10*4882a593Smuzhiyun 11*4882a593SmuzhiyunFor more details about the A13-OLinuXino: 12*4882a593Smuzhiyun 13*4882a593Smuzhiyunhttps://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino/open-source-hardware 14*4882a593Smuzhiyun 15*4882a593SmuzhiyunHow to build it 16*4882a593Smuzhiyun=============== 17*4882a593Smuzhiyun 18*4882a593SmuzhiyunConfigure Buildroot: 19*4882a593Smuzhiyun 20*4882a593Smuzhiyun $ make olimex_a13_olinuxino_defconfig 21*4882a593Smuzhiyun 22*4882a593SmuzhiyunCompile everything and build the rootfs image: 23*4882a593Smuzhiyun 24*4882a593Smuzhiyun $ make 25*4882a593Smuzhiyun 26*4882a593SmuzhiyunNote: you will need access to the internet to download the required 27*4882a593Smuzhiyunsources. 28*4882a593Smuzhiyun 29*4882a593SmuzhiyunHow to write the SD card 30*4882a593Smuzhiyun======================== 31*4882a593Smuzhiyun 32*4882a593SmuzhiyunThe sdcard.img file is a complete bootable image ready to be written 33*4882a593Smuzhiyunon the boot medium. To install it, simply copy the image to a micro SD 34*4882a593Smuzhiyuncard: 35*4882a593Smuzhiyun 36*4882a593Smuzhiyun # dd if=output/images/sdcard.img of=/dev/sdX 37*4882a593Smuzhiyun 38*4882a593SmuzhiyunNotes: 39*4882a593Smuzhiyun - replace 'sdX' with the actual device with your micro SDcard, 40*4882a593Smuzhiyun - you may need to be root to do that (use 'sudo'). 41*4882a593Smuzhiyun 42*4882a593SmuzhiyunEject the SD card, insert it in the A13-OLinuXino board, and power it 43*4882a593Smuzhiyunup. 44