1How to get started with the MinnowBoard MAX 2=========================================== 3 41. Build 5 6 Apply the defconfig: 7 8 $ make minnowboard_max_defconfig 9 10 Add any additional packages required and build: 11 12 $ make 13 142. Write the SD card 15 16 The build process will create a SD card image in output/images. 17 Write the image to an mSD card, insert into the MinnowBoard MAX 18 and power the board on. 19 20 $ dd if=output/images/sdcard.img of=/dev/mmcblk0; sync 21 22 The system starts two consoles: one on the serial port 23 and one on HDMI. 24 253. Enjoy 26 27Additional information about this board can be found at 28http://www.minnowboard.org/. 29