1*4882a593SmuzhiyunpcDuino v1 boards (http://www.linksprite.com/linksprite-pcduino) 2*4882a593Smuzhiyun 3*4882a593SmuzhiyunIntro 4*4882a593Smuzhiyun===== 5*4882a593Smuzhiyun 6*4882a593SmuzhiyunThis default configuration will allow you to start experimenting 7*4882a593Smuzhiyunwith the buildroot environment for the LinkSprite pcDuino v1 board 8*4882a593Smuzhiyunincluding its flavors pcDuino-Lite and pcDuino-Lite-WiFi. With the 9*4882a593Smuzhiyuncurrent configuration it will bring-up the board and allow access 10*4882a593Smuzhiyunthrough the serial console as well as ethernet and wireless 11*4882a593Smuzhiyunnetwork interfaces. 12*4882a593Smuzhiyun 13*4882a593SmuzhiyunHow to build it 14*4882a593Smuzhiyun=============== 15*4882a593Smuzhiyun 16*4882a593SmuzhiyunConfigure Buildroot: 17*4882a593Smuzhiyun 18*4882a593Smuzhiyun $ make linksprite_pcduino_defconfig 19*4882a593Smuzhiyun 20*4882a593SmuzhiyunModify configuration if needed, e.g. add more packages to target: 21*4882a593Smuzhiyun 22*4882a593Smuzhiyun $ make menuconfig 23*4882a593Smuzhiyun 24*4882a593SmuzhiyunCompile everything and build the SD card image: 25*4882a593Smuzhiyun 26*4882a593Smuzhiyun $ make 27*4882a593Smuzhiyun 28*4882a593SmuzhiyunHow to write the SD card 29*4882a593Smuzhiyun======================== 30*4882a593Smuzhiyun 31*4882a593SmuzhiyunOnce the build process is finished you will have an image 32*4882a593Smuzhiyuncalled "sdcard.img" in the output/images/ directory. 33*4882a593Smuzhiyun 34*4882a593SmuzhiyunCopy the bootable "sdcard.img" onto an SD card with "dd": 35*4882a593Smuzhiyun 36*4882a593Smuzhiyun $ sudo dd if=output/images/sdcard.img of=/dev/sdX 37*4882a593Smuzhiyun 38*4882a593SmuzhiyunHow to boot new image 39*4882a593Smuzhiyun===================== 40*4882a593Smuzhiyun 41*4882a593SmuzhiyunInsert SD card and reset the board. By default pcDuino board 42*4882a593Smuzhiyunboots from SD card. 43