1pcDuino v1 boards (http://www.linksprite.com/linksprite-pcduino) 2 3Intro 4===== 5 6This default configuration will allow you to start experimenting 7with the buildroot environment for the LinkSprite pcDuino v1 board 8including its flavors pcDuino-Lite and pcDuino-Lite-WiFi. With the 9current configuration it will bring-up the board and allow access 10through the serial console as well as ethernet and wireless 11network interfaces. 12 13How to build it 14=============== 15 16Configure Buildroot: 17 18 $ make linksprite_pcduino_defconfig 19 20Modify configuration if needed, e.g. add more packages to target: 21 22 $ make menuconfig 23 24Compile everything and build the SD card image: 25 26 $ make 27 28How to write the SD card 29======================== 30 31Once the build process is finished you will have an image 32called "sdcard.img" in the output/images/ directory. 33 34Copy the bootable "sdcard.img" onto an SD card with "dd": 35 36 $ sudo dd if=output/images/sdcard.img of=/dev/sdX 37 38How to boot new image 39===================== 40 41Insert SD card and reset the board. By default pcDuino board 42boots from SD card. 43