1Intro 2===== 3 4This default configuration will allow you to start experimenting with the 5Buildroot environment for the Bananapi M2 Zero. With the current configuration 6it will bring-up the board, and allow access through the serial console. 7 8Bananapi M2 Zero link: 9http://www.banana-pi.org/m2z.html 10 11This configuration uses U-Boot mainline and kernel mainline. 12 13How to build 14============ 15 16 $ make bananapi_m2_zero_defconfig 17 $ make 18 19Note: you will need access to the internet to download the required 20sources. 21 22How to write the SD card 23======================== 24 25Once the build process is finished you will have an image called "sdcard.img" 26in the output/images/ directory. 27 28Copy the bootable "sdcard.img" onto an SD card with "dd": 29 30 $ sudo dd if=output/images/sdcard.img of=/dev/sdX 31 $ sync 32 33Insert the micro SDcard in your Bananapi M2 Zero and power it up. The console 34is on the Debug UART on the CON3 header, with serial settings 115200 8N1. 35