| /rk3399_rockchip-uboot/doc/device-tree-bindings/gpu/ |
| H A D | nvidia,tegra20-host1x.txt | 6 - interrupts: The interrupt outputs from the controller.
27 - interrupts: The interrupt outputs from the controller.
40 - interrupts: The interrupt outputs from the controller.
53 - interrupts: The interrupt outputs from the controller.
66 - interrupts: The interrupt outputs from the controller.
79 - interrupts: The interrupt outputs from the controller.
110 - interrupts: The interrupt outputs from the controller.
138 - interrupts: The interrupt outputs from the controller.
164 - interrupts: The interrupt outputs from the controller.
200 - interrupts: The interrupt outputs from the controller.
[all …]
|
| /rk3399_rockchip-uboot/doc/ |
| H A D | README.VSC3316-3308 | 14 On reset, VSC devices are in low-power state with all inputs, outputs and connections in an off sta…
30 …d connections. Connection through the VSC device requires the inputs and outputs to be properly co…
|
| H A D | README.vxworks | 66 look like VxWorks hangs somewhere as nothing outputs on the serial console.
|
| H A D | README.imx6 | 152 the mkimage tool outputs the required information about the HAB Blocks
|
| /rk3399_rockchip-uboot/doc/device-tree-bindings/spi/ |
| H A D | spi-cadence.txt | 19 the length that the master mode chip select outputs
|
| /rk3399_rockchip-uboot/doc/device-tree-bindings/gpio/ |
| H A D | nvidia,tegra20-gpio.txt | 6 - interrupts : The interrupt outputs from the controller. For Tegra20,
|
| H A D | nvidia,tegra186-gpio.txt | 89 The interrupt outputs from the HW block, one per set of ports, in the
|
| /rk3399_rockchip-uboot/tools/scripts/ |
| H A D | define2mk.sed | 5 # which preprocesses the common.h header files and outputs the final
|
| /rk3399_rockchip-uboot/arch/arm/dts/ |
| H A D | exynos5250.dtsi | 122 samsung,pwm-outputs = <0>, <1>, <2>, <3>;
|
| H A D | exynos54xx.dtsi | 203 samsung,pwm-outputs = <0>, <1>, <2>, <3>;
|
| /rk3399_rockchip-uboot/drivers/pwm/ |
| H A D | Kconfig | 35 useful. The PWM can be enabled but is not connected to any outputs
|
| /rk3399_rockchip-uboot/doc/device-tree-bindings/regulator/ |
| H A D | tps65090.txt | 6 - interrupts: the interrupt outputs of the controller
|
| /rk3399_rockchip-uboot/board/renesas/sh7785lcr/ |
| H A D | README.sh7785lcr | 103 This command outputs MAC address of this board.
|
| /rk3399_rockchip-uboot/drivers/gpio/ |
| H A D | Kconfig | 271 Driver for 74x164 compatible serial-in/parallel-out 8-outputs
273 This driver can be used to provide access to more gpio outputs.
319 GPIOs to work as open-drain outputs, is supported.
|
| /rk3399_rockchip-uboot/arch/arm/mach-omap2/omap5/ |
| H A D | Kconfig | 48 should be held low while the voltages and Oscillator outputs
|
| /rk3399_rockchip-uboot/doc/device-tree-bindings/reset/ |
| H A D | reset.txt | 37 reset outputs.
|
| /rk3399_rockchip-uboot/drivers/power/pmic/ |
| H A D | Kconfig | 191 * Adjustable outputs:
205 as a SoC power controller. It also provides 32KHz clock outputs. This
|
| /rk3399_rockchip-uboot/drivers/power/regulator/ |
| H A D | Kconfig | 163 * Adjustable outputs:
|
| /rk3399_rockchip-uboot/drivers/ddr/fsl/ |
| H A D | ctrl_regs.c | 1705 unsigned int outputs = 0; /* 0=Enabled, 1=Disabled */ in set_ddr_sdram_mode() local
1736 | ((outputs & 0x1) << 12) in set_ddr_sdram_mode()
|
| /rk3399_rockchip-uboot/doc/uImage.FIT/ |
| H A D | x86-fit-boot.txt | 55 outputs with the standard Makefile (as it is on ARM for example, at least at
|
| /rk3399_rockchip-uboot/drivers/video/ |
| H A D | Kconfig | 438 a VESA device and supports LCD panels, eDP and LVDS outputs.
450 a VESA device and supports LCD panels, eDP and LVDS outputs.
|
| /rk3399_rockchip-uboot/common/ |
| H A D | Kconfig | 516 executed from a pytest and simply outputs logging information
|
| /rk3399_rockchip-uboot/ |
| H A D | README | 2075 (two outputs, one input) to function. If this is
|