Searched refs:offsets (Results 1 – 19 of 19) sorted by relevance
4 # 1) Generate generic-asm-offsets.h5 # 2) Generate asm-offsets.h34 # 1) Generate generic-asm-offsets.h36 generic-offsets-file := include/generated/generic-asm-offsets.h38 always := $(generic-offsets-file)39 targets := lib/asm-offsets.s42 lib/asm-offsets.s: lib/asm-offsets.c FORCE46 $(obj)/$(generic-offsets-file): lib/asm-offsets.s FORCE47 $(call filechk,offsets,__GENERIC_ASM_OFFSETS_H__)50 # 2) Generate asm-offsets.h[all …]
30 static const uint8_t offsets[] = { in check_erratum_a4849() local35 static const uint8_t offsets[] = { in check_erratum_a4849() local41 for (i = 0; i < ARRAY_SIZE(offsets); i++) { in check_erratum_a4849()42 if (in_be32(dcsr + offsets[i]) != 2) { in check_erratum_a4849()
9 #include <asm-offsets.h>
34 touch ${out}/generated/generic-asm-offsets.h
6 meaning that offsets from 0 to 255 are supported by the chip. This often
22 - reg-shift : quantity to shift the register offsets by. If this property is23 not present then the register offsets are not shifted.
34 - reg-shift : quantity to shift the register offsets by.
296 static const unsigned offsets[4] = { in zynq_qspi_fill_tx_fifo() local320 offset = (priv->rx_buf) ? offsets[0] : offsets[len]; in zynq_qspi_fill_tx_fifo()
23 When placed in an aligned address such as 0x80a00000, char signature offsets
86 The "sd_fusing.sh" script can be used after updating offsets of binaries
12 #include <asm-offsets.h>
24 * bundle with u-boot, and code offsets are fixed. Secure zone
152 * GCC sometimes accesses words at negative offsets from the stack
207 The location offsets defined above are defaults chosen by Gateworks and are262 The location offsets defined above are defaults chosen by Gateworks and are
46 IDs and HW register offsets using a lookup table.
262 The EPLD on CS5 demuxes the following devices at the following offsets:
83 can invalidate driver-model device tree offsets. This option
295 from relative offsets to absolute addresses, so such data becomes more
1402 malloc_chunk. (This way, the fd/bk offsets for linking bin heads