| /rk3399_rockchip-uboot/ |
| H A D | Makefile | 235 sed -e s/i.86/x86/ \
469 for i in $(MAKECMDGOALS); do \
470 $(MAKE) -f $(srctree)/Makefile $$i; \
1696 %.i: %.c prepare scripts FORCE
|
| H A D | README | 223 SPL and U-Boot proper (i.e. they both follow the same rules).
255 i.e. SDRAM and serial UART
994 Define this to use i/o functions instead of macros
2090 Enables the driver for the SPI controllers on i.MX and MXC
2091 SoCs. Currently i.MX31/35/51 are supported.
2192 serial# is unaffected by this, i. e. it remains
2204 "protected RAM", i. e. RAM which is not overwritten
2707 CONFIG_SPL_TEXT_BASE (i.e. no relocation is done).
3037 cannot be allocated between the regions to align them (i.e.
3178 type_attribute = [s|d|x|b|i|m]
[all …]
|
| /rk3399_rockchip-uboot/board/freescale/m5373evb/ |
| H A D | README | 198 boot - boot default, i.e., run 'bootcmd'
199 bootd - boot default, i.e., run 'bootcmd'
|
| /rk3399_rockchip-uboot/drivers/bios_emulator/ |
| H A D | besys.c | 474 pciInfo.slot.i = 0; in BE_accessReg()
|
| /rk3399_rockchip-uboot/include/ |
| H A D | ppc_asm.tmpl | 161 * turned off, i.e. using physical addresses.
|
| /rk3399_rockchip-uboot/board/buffalo/lsxl/ |
| H A D | kwbimage-lschl.cfg | 165 # bit31-24: 0x03, Size (i.e. 64MB)
|
| H A D | kwbimage-lsxhl.cfg | 165 # bit31-24: 0x0f, Size (i.e. 256MB)
|
| /rk3399_rockchip-uboot/doc/ |
| H A D | README.memory-test | 17 catch 99% of hardware related (i. e. reliably reproducible) memory
|
| H A D | README.rockchip | 105 image at block 16384 (i.e. 8MB from the start of the SD card). This
209 fastboot -i 0x2207 flash loader evb-rk3288/spl/u-boot-spl-dtb.bin
|
| H A D | README.kconfig | 36 (i.e. remove all the include/configs/*.h), those additional processings
|
| /rk3399_rockchip-uboot/board/sbc8349/ |
| H A D | README | 25 board without having a valid HRCW in place (i.e. erased flash) as
|
| /rk3399_rockchip-uboot/arch/arm/dts/ |
| H A D | imx6ull-14x14-evk.dts | 15 model = "Freescale i.MX6 ULL 14x14 EVK Board";
|
| H A D | armada-xp-synology-ds414.dts | 104 * of the flash, i.e. in the middle of the uImage.
|
| H A D | imx6sl-evk.dts | 16 model = "Freescale i.MX6 SoloLite EVK Board";
|
| /rk3399_rockchip-uboot/board/freescale/mpc8349itx/ |
| H A D | README | 35 of the flash chips. If J22.E is ON (i.e. jumpered), then flash chip
|
| /rk3399_rockchip-uboot/scripts/kconfig/ |
| H A D | zconf.hash.c_shipped | 21 && ('g' == 103) && ('h' == 104) && ('i' == 105) && ('j' == 106) \
|
| /rk3399_rockchip-uboot/board/freescale/m54455evb/ |
| H A D | README | 279 boot - boot default, i.e., run 'bootcmd'
280 bootd - boot default, i.e., run 'bootcmd'
|
| /rk3399_rockchip-uboot/drivers/usb/gadget/ |
| H A D | Kconfig | 135 using the same protocol as implemented by the i.MX family's boot ROM.
|
| /rk3399_rockchip-uboot/include/linux/mtd/ |
| H A D | mtd.h | 590 struct mtd_info *__mtd_next_device(int i);
|
| /rk3399_rockchip-uboot/board/sandbox/ |
| H A D | README.sandbox | 41 build sandbox without SDL (i.e. no display/keyboard support) by removing
109 but you can force it to go to interactive mode instead with -i.
|
| /rk3399_rockchip-uboot/arch/x86/ |
| H A D | Kconfig | 167 # enabled (i.e. they are both in SPL, or both in U-Boot proper).
537 scoped. i.e. turbo_enable() needs to be called on not just the
683 assigned to PCI devices - i.e. the memory and prefetch regions, as
|
| /rk3399_rockchip-uboot/doc/uImage.FIT/ |
| H A D | command_syntax_extensions.txt | 21 i.e., without passing the Flattened Device Tree (FDT), and new way, where the
|
| /rk3399_rockchip-uboot/board/keymile/km_arm/ |
| H A D | kwbimage_128M16_1.cfg | 222 # bit 31-24: 0x0F, Size (i.e. 256MB)
|
| H A D | kwbimage_256M8_1.cfg | 224 # bit 31-24:0x1F, Size (i.e. 512MB)
|
| /rk3399_rockchip-uboot/drivers/mtd/spi/ |
| H A D | Kconfig | 220 driver doesn't (yet) use these for any kind of i/o overlap or prefetching.
|