Lines Matching refs:i

223 SPL and U-Boot proper (i.e. they both follow the same rules).
255 		i.e. SDRAM and serial UART
994 			Define this to use i/o functions instead of macros
2090 		Enables the driver for the SPI controllers on i.MX and MXC
2091 		SoCs. Currently i.MX31/35/51 are supported.
2192 		serial# is unaffected by this, i. e. it remains
2204 		"protected RAM", i. e. RAM which is not overwritten
2707 		CONFIG_SPL_TEXT_BASE (i.e. no relocation is done).
3037 		cannot be allocated between the regions to align them (i.e.
3178 		type_attribute = [s|d|x|b|i|m]
3189 		i - IP address
3382 		initialization, i. e. you CANNOT use normal RAM which
3705       when choosing the configuration, i. e.
3708 	- will configure for a plain TQM823L, i. e. no LCD support
3773 the form of a "patch", i. e. a context diff against a certain (latest
3801 diskboot- boot from IDE devicebootd   - boot default, i.e., run 'bootcmd'
4178 (2) If you execute several variables with one call to run (i. e.
4180     command will cause "run" to terminate, i. e. the remaining
4456 The "dumpimage" is a tool to disassemble images built by mkimage. Its "-i"
4461 	tools/dumpimage -i image -T type -p position data_file
4462 	  -i ==> extract from the 'image' a specific 'data_file'
4805 	X  kermit  /usr/bin/kermit -i -l %l -s	 Y    U	   Y	   N	  N
4806 	Y  kermit  /usr/bin/kermit -i -l %l -r	 N    D	   Y	   N	  N
4992 U-Boot runs in system state and uses physical addresses, i.e. the
5103 		/* find . -name "*.[chS]" | xargs grep -i <keyword> */
5218   directory of the U-Boot source tree (i. e. please make sure that