| /optee_os/core/include/drivers/ |
| H A D | imx_uart.h | 8c4a5a9a19e87b0b96b6add5e3adc23d877b06ed Fri Oct 16 07:17:59 UTC 2015 Peng Fan <Peng.Fan@freescale.com> arm: imx: add i.MX 6UltraLite and EVK board support
The i.MX 6UltraLite[1] is a high performance, ultra-efficient processor
family featuring an advanced implementation of a single ARM® Cortex®-A7
core.
This patch add i.MX 6Ulralite EVK board support:
1. Add a uart driver for i.MX platforms
2. Introduce plat-imx for i.MX platforms
3. Introduce i.MX6 UltraLite platform
4. This patch has been tested using the following step,
4.1. build step:
PLATFORM_FLAVOR=mx6ulevk make ARCH=arm PLATFORM=imx
${CROSS_COMPILE}-objcopy -O binary out/arm-plat-imx/core/tee.elf optee.bin
copy optee.bin to the first partition of SD card which is used for boot.
4.2. Boot setting in uboot:
run loadfdt;
run loadimage;
fatload mmc 1:1 0x9c100000 optee.bin;
run mmcargs;
bootz ${loadaddr} - ${fdt_addr};
5. pass xtest
Note:
CAAM is not implemented now, this will be added later.
[1] http://www.freescale.com/webapp/sps/site/prod_summary.jsp?
code=i.MX6UL&tid=redI.MX6UL-FAMILY&uc=true&lang_cd=en
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Pascal Brand <pascal.brand@linaro.org>
|
| /optee_os/core/arch/arm/plat-imx/ |
| H A D | link.mk | 8c4a5a9a19e87b0b96b6add5e3adc23d877b06ed Fri Oct 16 07:17:59 UTC 2015 Peng Fan <Peng.Fan@freescale.com> arm: imx: add i.MX 6UltraLite and EVK board support
The i.MX 6UltraLite[1] is a high performance, ultra-efficient processor
family featuring an advanced implementation of a single ARM® Cortex®-A7
core.
This patch add i.MX 6Ulralite EVK board support:
1. Add a uart driver for i.MX platforms
2. Introduce plat-imx for i.MX platforms
3. Introduce i.MX6 UltraLite platform
4. This patch has been tested using the following step,
4.1. build step:
PLATFORM_FLAVOR=mx6ulevk make ARCH=arm PLATFORM=imx
${CROSS_COMPILE}-objcopy -O binary out/arm-plat-imx/core/tee.elf optee.bin
copy optee.bin to the first partition of SD card which is used for boot.
4.2. Boot setting in uboot:
run loadfdt;
run loadimage;
fatload mmc 1:1 0x9c100000 optee.bin;
run mmcargs;
bootz ${loadaddr} - ${fdt_addr};
5. pass xtest
Note:
CAAM is not implemented now, this will be added later.
[1] http://www.freescale.com/webapp/sps/site/prod_summary.jsp?
code=i.MX6UL&tid=redI.MX6UL-FAMILY&uc=true&lang_cd=en
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Pascal Brand <pascal.brand@linaro.org>
|
| H A D | sub.mk | 8c4a5a9a19e87b0b96b6add5e3adc23d877b06ed Fri Oct 16 07:17:59 UTC 2015 Peng Fan <Peng.Fan@freescale.com> arm: imx: add i.MX 6UltraLite and EVK board support
The i.MX 6UltraLite[1] is a high performance, ultra-efficient processor
family featuring an advanced implementation of a single ARM® Cortex®-A7
core.
This patch add i.MX 6Ulralite EVK board support:
1. Add a uart driver for i.MX platforms
2. Introduce plat-imx for i.MX platforms
3. Introduce i.MX6 UltraLite platform
4. This patch has been tested using the following step,
4.1. build step:
PLATFORM_FLAVOR=mx6ulevk make ARCH=arm PLATFORM=imx
${CROSS_COMPILE}-objcopy -O binary out/arm-plat-imx/core/tee.elf optee.bin
copy optee.bin to the first partition of SD card which is used for boot.
4.2. Boot setting in uboot:
run loadfdt;
run loadimage;
fatload mmc 1:1 0x9c100000 optee.bin;
run mmcargs;
bootz ${loadaddr} - ${fdt_addr};
5. pass xtest
Note:
CAAM is not implemented now, this will be added later.
[1] http://www.freescale.com/webapp/sps/site/prod_summary.jsp?
code=i.MX6UL&tid=redI.MX6UL-FAMILY&uc=true&lang_cd=en
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Pascal Brand <pascal.brand@linaro.org>
|
| H A D | platform_config.h | 8c4a5a9a19e87b0b96b6add5e3adc23d877b06ed Fri Oct 16 07:17:59 UTC 2015 Peng Fan <Peng.Fan@freescale.com> arm: imx: add i.MX 6UltraLite and EVK board support
The i.MX 6UltraLite[1] is a high performance, ultra-efficient processor
family featuring an advanced implementation of a single ARM® Cortex®-A7
core.
This patch add i.MX 6Ulralite EVK board support:
1. Add a uart driver for i.MX platforms
2. Introduce plat-imx for i.MX platforms
3. Introduce i.MX6 UltraLite platform
4. This patch has been tested using the following step,
4.1. build step:
PLATFORM_FLAVOR=mx6ulevk make ARCH=arm PLATFORM=imx
${CROSS_COMPILE}-objcopy -O binary out/arm-plat-imx/core/tee.elf optee.bin
copy optee.bin to the first partition of SD card which is used for boot.
4.2. Boot setting in uboot:
run loadfdt;
run loadimage;
fatload mmc 1:1 0x9c100000 optee.bin;
run mmcargs;
bootz ${loadaddr} - ${fdt_addr};
5. pass xtest
Note:
CAAM is not implemented now, this will be added later.
[1] http://www.freescale.com/webapp/sps/site/prod_summary.jsp?
code=i.MX6UL&tid=redI.MX6UL-FAMILY&uc=true&lang_cd=en
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Pascal Brand <pascal.brand@linaro.org>
|
| H A D | main.c | 8c4a5a9a19e87b0b96b6add5e3adc23d877b06ed Fri Oct 16 07:17:59 UTC 2015 Peng Fan <Peng.Fan@freescale.com> arm: imx: add i.MX 6UltraLite and EVK board support
The i.MX 6UltraLite[1] is a high performance, ultra-efficient processor
family featuring an advanced implementation of a single ARM® Cortex®-A7
core.
This patch add i.MX 6Ulralite EVK board support:
1. Add a uart driver for i.MX platforms
2. Introduce plat-imx for i.MX platforms
3. Introduce i.MX6 UltraLite platform
4. This patch has been tested using the following step,
4.1. build step:
PLATFORM_FLAVOR=mx6ulevk make ARCH=arm PLATFORM=imx
${CROSS_COMPILE}-objcopy -O binary out/arm-plat-imx/core/tee.elf optee.bin
copy optee.bin to the first partition of SD card which is used for boot.
4.2. Boot setting in uboot:
run loadfdt;
run loadimage;
fatload mmc 1:1 0x9c100000 optee.bin;
run mmcargs;
bootz ${loadaddr} - ${fdt_addr};
5. pass xtest
Note:
CAAM is not implemented now, this will be added later.
[1] http://www.freescale.com/webapp/sps/site/prod_summary.jsp?
code=i.MX6UL&tid=redI.MX6UL-FAMILY&uc=true&lang_cd=en
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Pascal Brand <pascal.brand@linaro.org>
|
| H A D | conf.mk | 8c4a5a9a19e87b0b96b6add5e3adc23d877b06ed Fri Oct 16 07:17:59 UTC 2015 Peng Fan <Peng.Fan@freescale.com> arm: imx: add i.MX 6UltraLite and EVK board support
The i.MX 6UltraLite[1] is a high performance, ultra-efficient processor
family featuring an advanced implementation of a single ARM® Cortex®-A7
core.
This patch add i.MX 6Ulralite EVK board support:
1. Add a uart driver for i.MX platforms
2. Introduce plat-imx for i.MX platforms
3. Introduce i.MX6 UltraLite platform
4. This patch has been tested using the following step,
4.1. build step:
PLATFORM_FLAVOR=mx6ulevk make ARCH=arm PLATFORM=imx
${CROSS_COMPILE}-objcopy -O binary out/arm-plat-imx/core/tee.elf optee.bin
copy optee.bin to the first partition of SD card which is used for boot.
4.2. Boot setting in uboot:
run loadfdt;
run loadimage;
fatload mmc 1:1 0x9c100000 optee.bin;
run mmcargs;
bootz ${loadaddr} - ${fdt_addr};
5. pass xtest
Note:
CAAM is not implemented now, this will be added later.
[1] http://www.freescale.com/webapp/sps/site/prod_summary.jsp?
code=i.MX6UL&tid=redI.MX6UL-FAMILY&uc=true&lang_cd=en
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Pascal Brand <pascal.brand@linaro.org>
|
| /optee_os/core/drivers/ |
| H A D | imx_uart.c | 8c4a5a9a19e87b0b96b6add5e3adc23d877b06ed Fri Oct 16 07:17:59 UTC 2015 Peng Fan <Peng.Fan@freescale.com> arm: imx: add i.MX 6UltraLite and EVK board support
The i.MX 6UltraLite[1] is a high performance, ultra-efficient processor
family featuring an advanced implementation of a single ARM® Cortex®-A7
core.
This patch add i.MX 6Ulralite EVK board support:
1. Add a uart driver for i.MX platforms
2. Introduce plat-imx for i.MX platforms
3. Introduce i.MX6 UltraLite platform
4. This patch has been tested using the following step,
4.1. build step:
PLATFORM_FLAVOR=mx6ulevk make ARCH=arm PLATFORM=imx
${CROSS_COMPILE}-objcopy -O binary out/arm-plat-imx/core/tee.elf optee.bin
copy optee.bin to the first partition of SD card which is used for boot.
4.2. Boot setting in uboot:
run loadfdt;
run loadimage;
fatload mmc 1:1 0x9c100000 optee.bin;
run mmcargs;
bootz ${loadaddr} - ${fdt_addr};
5. pass xtest
Note:
CAAM is not implemented now, this will be added later.
[1] http://www.freescale.com/webapp/sps/site/prod_summary.jsp?
code=i.MX6UL&tid=redI.MX6UL-FAMILY&uc=true&lang_cd=en
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Pascal Brand <pascal.brand@linaro.org>
|
| H A D | sub.mk | 8c4a5a9a19e87b0b96b6add5e3adc23d877b06ed Fri Oct 16 07:17:59 UTC 2015 Peng Fan <Peng.Fan@freescale.com> arm: imx: add i.MX 6UltraLite and EVK board support
The i.MX 6UltraLite[1] is a high performance, ultra-efficient processor
family featuring an advanced implementation of a single ARM® Cortex®-A7
core.
This patch add i.MX 6Ulralite EVK board support:
1. Add a uart driver for i.MX platforms
2. Introduce plat-imx for i.MX platforms
3. Introduce i.MX6 UltraLite platform
4. This patch has been tested using the following step,
4.1. build step:
PLATFORM_FLAVOR=mx6ulevk make ARCH=arm PLATFORM=imx
${CROSS_COMPILE}-objcopy -O binary out/arm-plat-imx/core/tee.elf optee.bin
copy optee.bin to the first partition of SD card which is used for boot.
4.2. Boot setting in uboot:
run loadfdt;
run loadimage;
fatload mmc 1:1 0x9c100000 optee.bin;
run mmcargs;
bootz ${loadaddr} - ${fdt_addr};
5. pass xtest
Note:
CAAM is not implemented now, this will be added later.
[1] http://www.freescale.com/webapp/sps/site/prod_summary.jsp?
code=i.MX6UL&tid=redI.MX6UL-FAMILY&uc=true&lang_cd=en
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Pascal Brand <pascal.brand@linaro.org>
|
| /optee_os/ |
| H A D | README.md | 8c4a5a9a19e87b0b96b6add5e3adc23d877b06ed Fri Oct 16 07:17:59 UTC 2015 Peng Fan <Peng.Fan@freescale.com> arm: imx: add i.MX 6UltraLite and EVK board support
The i.MX 6UltraLite[1] is a high performance, ultra-efficient processor
family featuring an advanced implementation of a single ARM® Cortex®-A7
core.
This patch add i.MX 6Ulralite EVK board support:
1. Add a uart driver for i.MX platforms
2. Introduce plat-imx for i.MX platforms
3. Introduce i.MX6 UltraLite platform
4. This patch has been tested using the following step,
4.1. build step:
PLATFORM_FLAVOR=mx6ulevk make ARCH=arm PLATFORM=imx
${CROSS_COMPILE}-objcopy -O binary out/arm-plat-imx/core/tee.elf optee.bin
copy optee.bin to the first partition of SD card which is used for boot.
4.2. Boot setting in uboot:
run loadfdt;
run loadimage;
fatload mmc 1:1 0x9c100000 optee.bin;
run mmcargs;
bootz ${loadaddr} - ${fdt_addr};
5. pass xtest
Note:
CAAM is not implemented now, this will be added later.
[1] http://www.freescale.com/webapp/sps/site/prod_summary.jsp?
code=i.MX6UL&tid=redI.MX6UL-FAMILY&uc=true&lang_cd=en
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Pascal Brand <pascal.brand@linaro.org>
|