Lines Matching refs:be

5 For some PowerPC processors with SRIO or PCIE interface, boot location can be
7 do without flash for u-boot image, ucode and ENV. All the images can be fetched
15 	a) Master and slave can be SOCs in one board or SOCs in separate boards.
19 	   U-Boot images, UCodes will be stored in this flash.
33 	Two P4080DS platforms can be used to implement the boot from SRIO or PCIE.
34 	Their SRIO or PCIE ports 1 will be connected directly and will be used for
70 		h) Since all cores of slave in holdoff, slave should be powered on before
71 		   all the above master's steps, and wait to be released by master. In the
90 	   For master, U-Boot image should be generated normally.
92 	   For example, master U-Boot image used on P4080DS should be compiled with
96 	   For slave, U-Boot image should be generated specifically by
100 	   For example, slave U-Boot image used on P4080DS should be compiled with
107 	   can be modified in the file:
116       parameters can not be modified by "saveenv" or other commands under