28 	int ret = -1;  in upower_status()  local
33 		ret = 0;  in upower_status()
49 	return ret;  in upower_status()
91 	int ret, ret_val;  in upower_pwm()  local
101 		ret = upwr_pwm_power_on(&swt, NULL, NULL);  in upower_pwm()
103 		ret = upwr_pwm_power_off(&swt, NULL, NULL);  in upower_pwm()
106 	if (ret) {  in upower_pwm()
107 		NOTICE("%s failed: ret: %d, pwr_on: %d\n", __func__, ret, pwr_on);  in upower_pwm()
108 		return ret;  in upower_pwm()
112 	ret = upwr_poll_req_status(UPWR_SG_PWRMGMT, NULL, NULL, &ret_val, 1000);  in upower_pwm()
113 	if (ret != UPWR_REQ_OK) {  in upower_pwm()
114 		NOTICE("Failure %d, %s\n", ret, __func__);  in upower_pwm()
115 		if (ret == UPWR_REQ_BUSY) {  in upower_pwm()
127 	int ret, ret_val;  in upower_read_temperature()  local
131 	ret = upwr_tpm_get_temperature(sensor_id, NULL);  in upower_read_temperature()
132 	if (ret) {  in upower_read_temperature()
133 		return ret;  in upower_read_temperature()
137 	ret = upwr_poll_req_status(UPWR_SG_TEMPM, NULL, &err_code, &ret_val, 1000);  in upower_read_temperature()
138 	if (ret > UPWR_REQ_OK) {  in upower_read_temperature()
139 		return ret;  in upower_read_temperature()
151 	int ret, ret_val;  in upower_pmic_i2c_write()  local
154 	ret = upwr_xcp_i2c_access(0x32, 1, 1, reg_addr, reg_val, NULL);  in upower_pmic_i2c_write()
155 	if (ret) {  in upower_pmic_i2c_write()
156 		WARN("pmic i2c read failed ret %d\n", ret);  in upower_pmic_i2c_write()
157 		return ret;  in upower_pmic_i2c_write()
161 	ret = upwr_poll_req_status(UPWR_SG_EXCEPT, NULL, &err_code, &ret_val, 1000);  in upower_pmic_i2c_write()
162 	if (ret != UPWR_REQ_OK) {  in upower_pmic_i2c_write()
164 		     ret, err_code, ret_val);  in upower_pmic_i2c_write()
165 		return ret;  in upower_pmic_i2c_write()
175 	int ret, ret_val;  in upower_pmic_i2c_read()  local
182 	ret = upwr_xcp_i2c_access(0x32, -1, 1, reg_addr, 0, NULL);  in upower_pmic_i2c_read()
183 	if (ret) {  in upower_pmic_i2c_read()
184 		WARN("pmic i2c read failed ret %d\n", ret);  in upower_pmic_i2c_read()
185 		return ret;  in upower_pmic_i2c_read()
189 	ret = upwr_poll_req_status(UPWR_SG_EXCEPT, NULL, &err_code, &ret_val, 1000);  in upower_pmic_i2c_read()
190 	if (ret != UPWR_REQ_OK) {  in upower_pmic_i2c_read()
192 			ret, err_code, ret_val);  in upower_pmic_i2c_read()
193 		return ret;  in upower_pmic_i2c_read()