| #
1c408d3c |
| 01-Mar-2024 |
Manish Pandey <manish.pandey2@arm.com> |
Merge changes from topic "imx8ulp_support" into integration
* changes:
docs(maintainers): add the maintainers for imx8ulp
docs(imx8ulp): add imx8ulp platform
fix(imx8ulp): increase the mmap re
Merge changes from topic "imx8ulp_support" into integration
* changes:
docs(maintainers): add the maintainers for imx8ulp
docs(imx8ulp): add imx8ulp platform
fix(imx8ulp): increase the mmap region num
feat(imx8ulp): adjust the dram mapped region
feat(imx8ulp): ddrc switch auto low power and software interface
feat(imx8ulp): add some delay before cmc1 access
feat(imx8ulp): add a flag check for the ddr status
fix(imx8ulp): add sw workaround for csi/hotplug test hang
feat(imx8ulp): adjust the voltage when sys dvfs enabled
feat(imx8ulp): enable the DDR frequency scaling support
fix(imx8ulp): fix suspend/resume issue when DBD owner is s400 only
feat(imx8ulp): update XRDC for ELE to access DDR with CA35 DID
feat(imx8ulp): add memory region policy
feat(imx8ulp): protect TEE region for secure access only
feat(imx8ulp): add trusty support
feat(imx8ulp): add OPTEE support
feat(imx8ulp): update the upower config for power optimization
feat(imx8ulp): allow RTD to reset APD through MU
feat(imx8ulp): not power off LPAV PD when LPAV owner is RTD
feat(imx8ulp): add system power off support
feat(imx8ulp): add APD power down mode(PD) support in system suspend
feat(imx8ulp): add the basic support for idle & system suspned
feat(imx8ulp): enable 512KB cache after resume on imx8ulp
feat(imx8ulp): add the initial XRDC support
feat(imx8ulp): allocated caam did for the non secure world
feat(imx8ulp): add i.MX8ULP basic support
build(changelog): add new scopes for nxp imx8ulp platform
feat(scmi): add scmi sensor support
show more ...
|
| #
416c4433 |
| 27-May-2022 |
Jacky Bai <ping.bai@nxp.com> |
feat(imx8ulp): adjust the voltage when sys dvfs enabled
When system level DVFS is enabled, voltage can be changed to
optimize the power consumption.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Revi
feat(imx8ulp): adjust the voltage when sys dvfs enabled
When system level DVFS is enabled, voltage can be changed to
optimize the power consumption.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Change-Id: Idfa0e637402078f3daf6e7c4ea1abb9af7675494
show more ...
|
| #
fcd41e86 |
| 02-Jul-2020 |
Jacky Bai <ping.bai@nxp.com> |
feat(imx8ulp): add i.MX8ULP basic support
Add the basic support for i.MX8ULP.
The i.MX 8ULP family of processors features NXP’s advanced
implementation of the dual Arm Cortex-A35 cores alongside
an
feat(imx8ulp): add i.MX8ULP basic support
Add the basic support for i.MX8ULP.
The i.MX 8ULP family of processors features NXP’s advanced
implementation of the dual Arm Cortex-A35 cores alongside
an Arm Cortex-M33. This combined architecture enables the
device to run a rich operating system (such as Linux) on
the Cortex-A35 core and an RTOS (such as FreeRTOS) on the
Cortex-M33 core. It also includes a Cadence Tensilica Fusion
DSP for low-power audio and a HiFi4 DSP for advanced audio
and machine learning applications.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I12df622b95960bcdf7da52e4c66470a700690e36
show more ...
|