Lines Matching full:mipi

1 Rockchip SoC MIPI RX D-PHY
6 	"rockchip,rk1808-mipi-dphy-rx"
7 	"rockchip,rk3288-mipi-dphy"
8 	"rockchip,rk3326-mipi-dphy"
9 	"rockchip,rk3368-mipi-dphy"
10 	"rockchip,rk3399-mipi-dphy"
16 MIPI RX0 D-PHY use registers in "general register files", it
18 MIPI TX1RX1 D-PHY have its own registers, it must have a reg property.
22 - rockchip,grf: MIPI TX1RX1 D-PHY not only has its own register but also
23 		the GRF, so it is only necessary for MIPI TX1RX1 D-PHY.
31 The first port show the sensors connected in this mipi-dphy.
33 	- remote-endpoint: Linked to a sensor with a MIPI CSI-2 video bus.
34 	- data-lanes : (required) an array specifying active physical MIPI-CSI2
40 			0 - autodetect based on other properties (MIPI CSI-2 D-PHY, parallel or Bt656)
41 			1 - MIPI CSI-2 C-PHY, no support
42 			2 - MIPI CSI1, no support
61 	mipi_dphy_rx0: mipi-dphy-rx0 {
62 		compatible = "rockchip,rk3399-mipi-dphy";
120 				/*data-lanes = <1 2 3 4>; //for mipi*/
121 				data-lanes = <4>; //for lvds, note: this diff to mipi