rv1126: usbplug: update version to 1.24

build from:
0744719244: usbplug: fix chip id write error.

update feature:
fix chip id write error.

Signed-off-by: Chen Fen <chenfen@rock-chi

rv1126: usbplug: update version to 1.24

build from:
0744719244: usbplug: fix chip id write error.

update feature:
fix chip id write error.

Signed-off-by: Chen Fen <chenfen@rock-chips.com>
Change-Id: I0646a9fb5cc14a6c27664465daca42283bf9e05e

show more ...

rv1126: spl: rv1126_spl_emmc_tb update to v1.13

build from:
f3f5db2e27 rockchip: common: Fix error in command else

update feature:
fix DECOM_ENR is not clear found in v1.12

Signed-

rv1126: spl: rv1126_spl_emmc_tb update to v1.13

build from:
f3f5db2e27 rockchip: common: Fix error in command else

update feature:
fix DECOM_ENR is not clear found in v1.12

Signed-off-by: Zhichao Yu <zhichao.yu@rock-chips.com>
Change-Id: Ia7fd60c6edde6d7175c245d1a746b879dd979069

show more ...

RKBOOT/RKTRUST/bin: Set file mode 644

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I3fa512e2cfa636800ef15907c53aae24cd599967

rv1126: usbplug: Update to v1.23

from commit:
rk_boot_all: e6c168
update feature:
src: spinand: Support new devices

Change-Id: I8c91dbc80507c4b90c8e4933c9fbdeb72aef1cbb
Signed-off-by: Jon Lin <jo

rv1126: usbplug: Update to v1.23

from commit:
rk_boot_all: e6c168
update feature:
src: spinand: Support new devices

Change-Id: I8c91dbc80507c4b90c8e4933c9fbdeb72aef1cbb
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>

show more ...

rv1126: usbplug: update to v1.22

from commit:
rk_boot_all: e48799: src: spinor: Support 4KB erase aligned
update feature:
Support spinor 4KB erase aligned

Change-Id: Id0fc2751744a7ff1555e919623b

rv1126: usbplug: update to v1.22

from commit:
rk_boot_all: e48799: src: spinor: Support 4KB erase aligned
update feature:
Support spinor 4KB erase aligned

Change-Id: Id0fc2751744a7ff1555e919623bc5b57cb650120
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>

show more ...

rv1126: usbplug: Update to v1.21

build from:
rk_boot_all c38741 src: spinand: support GD5F2GM7xxG
update feature:
Support new spiflash

Change-Id: I7ba8cf6be24532969700ba432efbdc8a560c3a23
Signed-

rv1126: usbplug: Update to v1.21

build from:
rk_boot_all c38741 src: spinand: support GD5F2GM7xxG
update feature:
Support new spiflash

Change-Id: I7ba8cf6be24532969700ba432efbdc8a560c3a23
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>

show more ...

rv1126: tpl: update thunder boot ddr bin to v1.08

build from next-dev:
9080840a12 drivers: ram: rv1126: Detect byte map of x16 DDR3/DDR4
update feature:
9080840a12 drivers: ram: rv11

rv1126: tpl: update thunder boot ddr bin to v1.08

build from next-dev:
9080840a12 drivers: ram: rv1126: Detect byte map of x16 DDR3/DDR4
update feature:
9080840a12 drivers: ram: rv1126: Detect byte map of x16 DDR3/DDR4
build command:
CONFIG_SPL_KERNEL_BOOT=y
for lpddr3 bin, CONFIG_ROCKCHIP_TPL_INIT_DRAM_TYPE need set to 6.
for lpddr4 bin, CONFIG_ROCKCHIP_TPL_INIT_DRAM_TYPE need set to 7.
default CONFIG_ROCKCHIP_DRAM_EXTENDED_TEMP_SUPPORT=n, if you need
extended temperature bin, you need enable "CONFIG_ROCKCHIP_DRAM\
_EXTENDED_TEMP_SUPPORT", then rebuild uboot.
./make.sh rv1126 && ./make.sh tpl.
Note:
the pre-build 528MHz binary disable ODT.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Change-Id: If0e8207e9e4b9e36850dbc7fb6aabebfc8a32bd8

show more ...

rv1126: usbplug: update version to v1.20

build from:
rk_boot_all a00b18c src: platform: rv1126: Update to 1.20
build feature:
support new flash devices, W25N512GVEIG, GD5F1GQ4UExxH

Change-Id: I8e

rv1126: usbplug: update version to v1.20

build from:
rk_boot_all a00b18c src: platform: rv1126: Update to 1.20
build feature:
support new flash devices, W25N512GVEIG, GD5F1GQ4UExxH

Change-Id: I8e5fbea2a0a64cf7dd82b79ae9b15881ed3623e6
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>

show more ...

rv1126: usbplug: update version to v1.19

build from:
rk_boot_all b9678f6f src: spinand: not cache recheck for XTX device
build feature:
support new flash devices

Change-Id: I5e72a26108fa7004a61f8

rv1126: usbplug: update version to v1.19

build from:
rk_boot_all b9678f6f src: spinand: not cache recheck for XTX device
build feature:
support new flash devices

Change-Id: I5e72a26108fa7004a61f8caf1acf8e162bb7ff80
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>

show more ...

rv1126: tpl: update thunder boot ddr bin to v1.06

build from next-dev:
b1b9d7fba4 drivers: ram: common: fix ssmod define err
update feature:
b1b9d7fba4 drivers: ram: common: fix ssmo

rv1126: tpl: update thunder boot ddr bin to v1.06

build from next-dev:
b1b9d7fba4 drivers: ram: common: fix ssmod define err
update feature:
b1b9d7fba4 drivers: ram: common: fix ssmod define err
d49e7c3403 drivers: ram: rv1126: fix the judgment of "set ctl address map fail"
06a17b4adf drivers: ram: rv1126: Turn on DQS_c 2k pull-up resistor to workaround WDQS control of LPDDR4/LPDDR4X
246ad23dbf drivers: ram: rk356x: fix read_mr() of LPDDR3
e90784abb2 rv1126: ddr: fix tx dqs bypass phase setting err
c2a03d5d81 drivers: ram: rv1126: add support lpddr4x
bf922fc800 drivers: ram: rv1126: fix calculating of MSCH_DeviceSize
e2dc1cc022 drivers: ram: rv1126: Modify tRFC and related timing based on DDR capacity
330cd12fc3 drivers: ram: rv1126: fix return value of read_mr()
3993b0c711 drivers: ram: rv1126: Set default value of die bus with to x16 when bus width is x16/x32 of DDR3
9050e1f82e drivers: ram: rv1126: fix tZQLAT of LPDDR4
build command:
CONFIG_SPL_KERNEL_BOOT=y
for lpddr3 bin, CONFIG_ROCKCHIP_TPL_INIT_DRAM_TYPE need set to 6.
for lpddr4 bin, CONFIG_ROCKCHIP_TPL_INIT_DRAM_TYPE need set to 7.
default CONFIG_ROCKCHIP_DRAM_EXTENDED_TEMP_SUPPORT=n, if you need
extended temperature bin, you need enable "CONFIG_ROCKCHIP_DRAM\
_EXTENDED_TEMP_SUPPORT", then rebuild uboot.
./make.sh rv1126 && ./make.sh tpl.
Note:
the pre-build 528MHz binary disable ODT.

Change-Id: Ibb384f60d714535822202330d2c3ae3cef75337c
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>

show more ...