Merge branch 'master' of git://www.denx.de/git/u-boot-dm

buildman: Squash useless output from -K

When using #define CONFIG_SOME_OPTION, the value it set to '1'. When using
defconfig (i.e. CONFIG_SOME_OPTION=y) the value is set to 'y'. This results
in diff

buildman: Squash useless output from -K

When using #define CONFIG_SOME_OPTION, the value it set to '1'. When using
defconfig (i.e. CONFIG_SOME_OPTION=y) the value is set to 'y'. This results
in differences showing up with -K. These differences are seldom useful.

Adjust buildman to suppress these differences by default.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

buildman: Add an option to just create the config

Normally buildman does a full build of a board. This includes creating the
u-boot.cfg file which contains all the configuration options. Buildman us

buildman: Add an option to just create the config

Normally buildman does a full build of a board. This includes creating the
u-boot.cfg file which contains all the configuration options. Buildman uses
this file with the -K option, to show differences in effective configuration
for each commit.

Doing a full build of U-Boot just to create the u-boot.cfg file is wasteful.
Add a -D option which causes buildman to only create the configuration. This
is enough to support use of -K and can be done much more quickly (typically
5-10 times faster).

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Merge git://git.denx.de/u-boot-dm

buildman: allow more incremental building

One use-case for buildman is to continually run it interactively after
each small step in a large refactoring operation. This gives more
immediate feedback

buildman: allow more incremental building

One use-case for buildman is to continually run it interactively after
each small step in a large refactoring operation. This gives more
immediate feedback than making a number of commits and then going back and
testing them. For this to work well, buildman needs to be extremely fast.
At present, a couple issues prevent it being as fast as it could be:

1) Each time buildman runs "make %_defconfig", it runs "make mrproper"
first. This throws away all previous build results, requiring a
from-scratch build. Optionally avoiding this would speed up the build, at
the cost of potentially causing or missing some build issues.

2) A build tree is created per thread rather than per board. When a thread
switches between building different boards, this often causes many files
to be rebuilt due to changing config options. Using a separate build tree
for each board would avoid this. This does put more strain on the system's
disk cache, but it is worth it on my system at least.

This commit adds two command-line options to implement the changes
described above; -I ("--incremental") turns of "make mrproper" and -P
("--per-board-out-dir") creats a build directory per board rather than per
thread.

Tested:

./tools/buildman/buildman.py tegra
./tools/buildman/buildman.py -I -P tegra
./tools/buildman/buildman.py -b tegra_dev tegra
./tools/buildman/buildman.py -b tegra_dev -I -P tegra

... each once after deleting the buildman result/work directory, and once
"incrementally" after a previous identical invocation.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Simon Glass <sjg@chromium.org> # v1
Tested-by: Simon Glass <sjg@chromium.org> # v1
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

buildman: Clarify the use of -V

This option outputs to the log file, not to the terminal. Clarify that in
the help, and add a mention of it in the README.

Signed-off-by: Simon Glass <sjg@chromium.o

buildman: Clarify the use of -V

This option outputs to the log file, not to the terminal. Clarify that in
the help, and add a mention of it in the README.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Stephen Warren <swarren@nvidia.com>

show more ...

Merge branch 'u-boot/master' into 'u-boot-arm/master'

Merge branch 'buildman' of git://git.denx.de/u-boot-x86

buildman: Allow comparison of build configuration

It is useful to be able to see CONFIG changes made by commits. Add this
feature to buildman using the -K flag so that all CONFIG changes are
reporte

buildman: Allow comparison of build configuration

It is useful to be able to see CONFIG changes made by commits. Add this
feature to buildman using the -K flag so that all CONFIG changes are
reported.

The CONFIG options exist in a number of files. Each is reported
individually as well as a summary that covers all files. The output
shows three parts: green for additions, red for removals and yellow for
changes.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'buildman' of git://git.denx.de/u-boot-x86

buildman: Add an option to write the full build output

Normally buildman runs with 'make -s' meaning that only errors and warnings
appear in the log file. Add a -V option to run make in verbose mode

buildman: Add an option to write the full build output

Normally buildman runs with 'make -s' meaning that only errors and warnings
appear in the log file. Add a -V option to run make in verbose mode, and
with V=1, causing a full build log to be created.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

buildman: Add the option to download toolchains from kernel.org

The site at https://www.kernel.org/pub/tools/crosstool/ is a convenient
repository of toolchains which can be used for U-Boot. Add a f

buildman: Add the option to download toolchains from kernel.org

The site at https://www.kernel.org/pub/tools/crosstool/ is a convenient
repository of toolchains which can be used for U-Boot. Add a feature to
download and install a toolchain for a selected architecture automatically.

It isn't clear how long this site will stay in the current place and
format, but we should be able to rely on bug reports if it changes.

Suggested-by: Marek Vašut <marex@denx.de>
Suggested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

buildman: Add an option to use the full tool chain path

In some cases there may be multiple toolchains with the same name in the
path. Provide an option to use the full path in the CROSS_COMPILE
env

buildman: Add an option to use the full tool chain path

In some cases there may be multiple toolchains with the same name in the
path. Provide an option to use the full path in the CROSS_COMPILE
environment variable.

Note: Wolfgang mentioned that this is dangerous since in some cases there
may be other tools on the path that are needed. So this is set up as an
option, not the default. I will need test confirmation (i.e. that this
commit fixes a real problem) before merging it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Steve Rae <srae@broadcom.com>

show more ...

buildman: Add an option to flatten output directory trees

When building current source for a single board, buildman puts the output
in <output_dir>/current/current/<board>. Add an option to make it

buildman: Add an option to flatten output directory trees

When building current source for a single board, buildman puts the output
in <output_dir>/current/current/<board>. Add an option to make it use
<output_dir>/<board> instead. This removes the unnecessary directories
in that case, controlled by the --no-subdirs/-N option.

Suggested-by: Tom Rini <trini@ti.com>
Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-arm

Merge branch 'buildman' of git://git.denx.de/u-boot-x86

buildman: fix typos of --dry-run help message

try run => dry run
no nothing => do nothing
"..." => '...'

The last one is for consistency with the other option helps.

Change-Id: I1d69047d1f

buildman: fix typos of --dry-run help message

try run => dry run
no nothing => do nothing
"..." => '...'

The last one is for consistency with the other option helps.

Change-Id: I1d69047d1fae6ef095a18f69f44ee13c448db9b7
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

buildman: Move the command line code into its own file

We want to be able to issue parser commands from within buildman for test
purposes. Move the parser code into its own file so we don't end up n

buildman: Move the command line code into its own file

We want to be able to issue parser commands from within buildman for test
purposes. Move the parser code into its own file so we don't end up needing
the buildman and test modules to reference each other.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...