| #
aba554cc |
| 23-Nov-2016 |
Jocelyn Bohr <bohr@google.com> |
Handle slow MMC writes
Flashing a 400Mb sparse system image takes ~10 minutes. The fastboot UDP
protocol expects a response within 1 minute, so during long flash
operations, the device must send fas
Handle slow MMC writes
Flashing a 400Mb sparse system image takes ~10 minutes. The fastboot UDP
protocol expects a response within 1 minute, so during long flash
operations, the device must send fastboot "INFO" packets.
This patch does the following:
- Separate large writes into writes of size FASTBOOT_MAX_BLK_WRITE.
This parameter was tuned by hand to result in a ~10 second write.
- Keep a timer and send an INFO packet every 30 seconds.
- Adjust the sequence number in the header of the fastboot OKAY packet
to account for any INFO packets sent during flashing.
- Reduce busywaiting in the bcm2835 MMC driver. This change is based on
what the kernel does, and doesn't seem to corrupt the MMC. Without
this change, "flashall" takes 25 minutes.
Bug: 31887729
Test: "fastboot -s udp:$RPI_IP flashall" works, rpi3 boots
- Compute CRC checksum over every write to verify written data
was not corrupted.
Change-Id: Ib17ef6a85715705a8b5f722a8b7d3e5fd1a6625d
show more ...
|
| #
965eda41 |
| 07-Nov-2016 |
Jocelyn Bohr <bohr@google.com> |
Add support for fastboot command over UDP
The Raspberry Pi does not support USB device mode, so fastboot over
USB does not work. This patch adds support for and partially
implements the device side
Add support for fastboot command over UDP
The Raspberry Pi does not support USB device mode, so fastboot over
USB does not work. This patch adds support for and partially
implements the device side fastboot UDP protocol as a U-boot command.
It requires an ip address set and ethernet initialized.
- Modify U-boot fastboot command to do fastboot over UDP
- Add net/fastboot.c, which implements fastboot server functions
- Handle QUERY and INIT fastboot packets
- Add CONFIG_UDP_FUNCION_FASTBOOT to enable fastboot over UDP
Bug: 31887729
Test: Tested with fastboot, responds correctly to query and init
packets.
Change-Id: I4045abaf7a4455d756b7c1c00215afaa90c70a6e
show more ...
|