| #
245eb900 |
| 06-Jan-2011 |
Lei Wen <leiwen@marvell.com> |
mtd: nand: Allow caller to pass alternative ID table to nand_scan_ident()
This patch sync with David's patch on Linux for handling nand_scan_ident.
commit 5e81e88a4c140586d9212999cea683bcd66a15c6
mtd: nand: Allow caller to pass alternative ID table to nand_scan_ident()
This patch sync with David's patch on Linux for handling nand_scan_ident.
commit 5e81e88a4c140586d9212999cea683bcd66a15c6
Author: David Woodhouse <David.Woodhouse@intel.com>
Date: Fri Feb 26 18:32:56 2010 +0000
mtd: nand: Allow caller to pass alternative ID table to nand_scan_ident()
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Lei Wen <leiwen@marvell.com>
show more ...
|
| #
cdc51c29 |
| 22-Dec-2010 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'next' of ../next
|
| #
1ce7084a |
| 10-Dec-2010 |
Florian Fainelli <florian@openwrt.org> |
NAND: add NAND_CMD_PARAM (0xec) definition
This command is used to read the device ONFI parameters page.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
|
| #
0bdecd82 |
| 20-Oct-2010 |
Mike Frysinger <vapier@gentoo.org> |
nand: constify id/manu tables
These id tables need not be writable.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
| #
e598dfc2 |
| 15-Jan-2010 |
Minkyu Kang <mk7.kang@samsung.com> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
cpu/arm_cortexa8/s5pc1xx/cache.c
include/asm-arm/arch-s5pc1xx/sys_proto.h
include/sja1000.h
Signed-off-by: Minkyu Kang <mk7.kang
Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
cpu/arm_cortexa8/s5pc1xx/cache.c
include/asm-arm/arch-s5pc1xx/sys_proto.h
include/sja1000.h
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
show more ...
|
| #
bb3bcfa2 |
| 15-Dec-2009 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'next' of ../next
|
| #
aaa8eec5 |
| 30-Oct-2009 |
Sandeep Paulraj <s-paulraj@ti.com> |
NAND: Update to support 64 bit device size
This patch adds support for NANDs greater than 2 GB.
Patch is based on the MTD NAND driver in the kernel.
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com
NAND: Update to support 64 bit device size
This patch adds support for NANDs greater than 2 GB.
Patch is based on the MTD NAND driver in the kernel.
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
show more ...
|
| #
3aa8b68d |
| 31-Aug-2009 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'next' of ../next
|
| #
5928da01 |
| 27-Aug-2009 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'next' of git://git.denx.de/u-boot-nand-flash into next
|
| #
f83b7f9e |
| 10-Aug-2009 |
Sandeep Paulraj <s-paulraj@ti.com> |
MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST
This patch adds the new mode NAND_ECC_HW_OOB_FIRST in the nand code to
support 4-bit ECC on TI DaVinci devices with large page (up to 2K) NAND
chips.
MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST
This patch adds the new mode NAND_ECC_HW_OOB_FIRST in the nand code to
support 4-bit ECC on TI DaVinci devices with large page (up to 2K) NAND
chips. This ECC mode is similar to NAND_ECC_HW, with the exception of
read_page API that first reads the OOB area, reads the data in chunks,
feeds the ECC from OOB area to the ECC hw engine and perform any
correction on the data as per the ECC status reported by the engine.
This patch has been accepted by Andrew Morton and can be found at
http://userweb.kernel.org/~akpm/mmotm/broken-out/mtd-nand-add-new-ecc-mode-ecc_hw_oob_first.patch
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
show more ...
|
| #
a2c65b47 |
| 10-Aug-2009 |
Sandeep Paulraj <s-paulraj@ti.com> |
NAND: ADD page Parameter to all read_page/read_page_raw API's
This patch adds a new "page" parameter to all NAND read_page/read_page_raw
APIs. The read_page API for the new mode ECC_HW_OOB_FIRST re
NAND: ADD page Parameter to all read_page/read_page_raw API's
This patch adds a new "page" parameter to all NAND read_page/read_page_raw
APIs. The read_page API for the new mode ECC_HW_OOB_FIRST requires the
page information to send the READOOB command and read the OOB area before
the data area.
This patch has been accepted by Andrew Morton and can be found at
http://userweb.kernel.org/~akpm/mmotm/broken-out/mtd-nand-add-page-parameter-to-all-read_page-read_page_raw-apis.patch
WE would like this to become part of the u-boot GIT as well
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
show more ...
|
| #
a694610d |
| 18-Jul-2009 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
|
| #
fbdaafae |
| 04-Jun-2009 |
Stefan Roese <sr@denx.de> |
nand: Change NAND_MAX_OOBSIZE to 218 as needed for some 4k page devices
This is needed for the MPC512x NAND driver (fsl_nfc_nand.c) which already
defines such a 4k plus 218 bytes ECC layout.
Signed
nand: Change NAND_MAX_OOBSIZE to 218 as needed for some 4k page devices
This is needed for the MPC512x NAND driver (fsl_nfc_nand.c) which already
defines such a 4k plus 218 bytes ECC layout.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
show more ...
|
| #
ef29884b |
| 25-Jan-2009 |
Ben Warren <biggerbadderben@gmail.com> |
Merge git://git.denx.de/u-boot into u-boot
|
| #
5df70e91 |
| 23-Jan-2009 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
|
| #
6c869637 |
| 16-Jan-2009 |
Wolfgang Grandegger <wg@grandegger.com> |
NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and
changes the default from 8 to 1 for the legacy and the new MTD
NAND layer.
NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and
changes the default from 8 to 1 for the legacy and the new MTD
NAND layer. This allows to remove all NAND_MAX_CHIPS definitions
in the board config files because none of the boards use multi
chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440
define
#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
but that's bogus and did not work anyhow.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
show more ...
|
| #
cb547320 |
| 17-Dec-2008 |
Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
Merge branch 'fixes' into cleanups
Conflicts:
board/atmel/atngw100/atngw100.c
board/atmel/atstk1000/atstk1000.c
cpu/at32ap/at32ap700x/gpio.c
include/asm-avr32/arch-at32ap700x/clk.h
include/con
Merge branch 'fixes' into cleanups
Conflicts:
board/atmel/atngw100/atngw100.c
board/atmel/atstk1000/atstk1000.c
cpu/at32ap/at32ap700x/gpio.c
include/asm-avr32/arch-at32ap700x/clk.h
include/configs/atngw100.h
include/configs/atstk1002.h
include/configs/atstk1003.h
include/configs/atstk1004.h
include/configs/atstk1006.h
include/configs/favr-32-ezkit.h
include/configs/hammerhead.h
include/configs/mimc200.h
show more ...
|
| #
3ec53148 |
| 01-Nov-2008 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
|
| #
a47f957a |
| 31-Oct-2008 |
Alessandro Rubini <rubini-list@gnudd.com> |
NAND: Allow NAND and OneNAND to coexist
This removes in nand.h code that is verbatim duplicated from bbm.h,
including directly bbm.h in nand.h. The previous state of affairs
prevented compiling code
NAND: Allow NAND and OneNAND to coexist
This removes in nand.h code that is verbatim duplicated from bbm.h,
including directly bbm.h in nand.h. The previous state of affairs
prevented compiling code for a board hosting both NAND and OneNAND chips.
Reported-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Scott Wood <scottwood@freescale.com>
show more ...
|
| #
c45912d8 |
| 24-Oct-2008 |
Scott Wood <scottwood@freescale.com> |
NAND: sync with 2.6.27
This brings the core NAND code up to date with the Linux kernel.
Since there were several drivers in Linux as of the last update that are
not in u-boot, I'm not bringing over
NAND: sync with 2.6.27
This brings the core NAND code up to date with the Linux kernel.
Since there were several drivers in Linux as of the last update that are
not in u-boot, I'm not bringing over new drivers that have been added
since in the absence of an interested party.
I did not update OneNAND since it was recently synced by Kyungmin Park,
and I'm not sure exactly what the common ancestor is.
Signed-off-by: Scott Wood <scottwood@freescale.com>
show more ...
|
| #
28ac6719 |
| 14-Aug-2008 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
|
| #
becbbc7b |
| 14-Aug-2008 |
Stefan Roese <sr@denx.de> |
Merge branch 'master' of /home/stefan/git/u-boot/u-boot into next
|
| #
d438d508 |
| 13-Aug-2008 |
Kyungmin Park <kmpark@infradead.org> |
Fix OneNAND build break
Since page size field is changed from oobblock to writesize. But OneNAND is not updated.
- fix bufferram management at erase operation
This patch includes the NAND/OneNAND st
Fix OneNAND build break
Since page size field is changed from oobblock to writesize. But OneNAND is not updated.
- fix bufferram management at erase operation
This patch includes the NAND/OneNAND state filed too.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
show more ...
|
| #
5a7ddf4e |
| 13-Aug-2008 |
Stefan Roese <sr@denx.de> |
Merge branch 'master' of /home/stefan/git/u-boot/u-boot
|
| #
13f0fd94 |
| 30-Jun-2008 |
Ilya Yanok <yanok@emcraft.com> |
NAND: Scan bad blocks lazily.
Rather than scanning on boot, scan upon the first attempt to check the
badness of a block. This speeds up boot when not using NAND, and reduces
the likelihood of needi
NAND: Scan bad blocks lazily.
Rather than scanning on boot, scan upon the first attempt to check the
badness of a block. This speeds up boot when not using NAND, and reduces
the likelihood of needing to reflash via JTAG if NAND becomes
nonfunctional.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
show more ...
|