UPSTREAM: board: arm: Add support for Broadcom BCM7445

Add support for loading U-Boot on the Broadcom 7445 SoC. This port
assumes Broadcom's BOLT bootloader is acting as the second stage
bootloader

UPSTREAM: board: arm: Add support for Broadcom BCM7445

Add support for loading U-Boot on the Broadcom 7445 SoC. This port
assumes Broadcom's BOLT bootloader is acting as the second stage
bootloader, and U-Boot is acting as the third stage bootloader, loaded
as an ELF program by BOLT.

Change-Id: I79d19ced6ed7c76a862b94162a92ceaddf09b062
Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org>
Cc: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 894c3ad27fa940beb7fdc07d01dcfe81c03d0481)

show more ...

UPSTREAM: libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>

Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt header

UPSTREAM: libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>

Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
include/libfdt.h -> include/linux/libfdt.h
include/libfdt_env.h -> include/linux/libfdt_env.h

and replaces include directives:
#include <libfdt.h> -> #include <linux/libfdt.h>
#include <libfdt_env.h> -> #include <linux/libfdt_env.h>

Change-Id: I6c0f7e50e8b571106627f25ddac008a62bd2994e
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

show more ...

mtd: nand: add the rockchip nand controller driver

Add basic Rockchip nand driver.

Driver in current state has 16, 24, 40, 60 per 1024B BCH/ECC ability and 8 bit asynchronous flash interface suppor

mtd: nand: add the rockchip nand controller driver

Add basic Rockchip nand driver.

Driver in current state has 16, 24, 40, 60 per 1024B BCH/ECC ability and 8 bit asynchronous flash interface support. Other features will come later.

Change-Id: I8e766afe7358a2357d75cfe094c4cd6fe92bd281
Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

show more ...

dtoc: Add support for 32 or 64-bit addresses

When using 32-bit addresses dtoc works correctly. For 64-bit addresses it
does not since it ignores the #address-cells and #size-cells properties.

Updat

dtoc: Add support for 32 or 64-bit addresses

When using 32-bit addresses dtoc works correctly. For 64-bit addresses it
does not since it ignores the #address-cells and #size-cells properties.

Update the tool to use fdt64_t as the element type for reg properties when
either the address or size is larger than one cell. Use the correct value
so that C code can obtain the information from the device tree easily.

Alos create a new type, fdt_val_t, which is defined to either fdt32_t or
fdt64_t depending on the word size of the machine. This type corresponds
to fdt_addr_t and fdt_size_t. Unfortunately we cannot just use those types
since they are defined to phys_addr_t and phys_size_t which use
'unsigned long' in the 32-bit case, rather than 'unsigned int'.

Add tests for the four combinations of address and size values (32/32,
64/64, 32/64, 64/32). Also update existing uses for rk3399 and rk3368
which now need to use the new fdt_val_t type.

Signed-off-by: Simon Glass <sjg@chromium.org>

Suggested-by: Heiko Stuebner <heiko@sntech.de>
Reported-by: Kever Yang <kever.yang@rock-chips.com>

show more ...

fdtdec: Drop old compatible values

These are not needed now since the drivers now use driver model. Drop
them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswi

fdtdec: Drop old compatible values

These are not needed now since the drivers now use driver model. Drop
them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>

show more ...

cros_ec: Convert to support live tree

Convert this driver to support the live device tree and remove the old
fdtdec support.

The keyboard is not yet converted.

Signed-off-by: Simon Glass <sjg@chro

cros_ec: Convert to support live tree

Convert this driver to support the live device tree and remove the old
fdtdec support.

The keyboard is not yet converted.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

dm: core: Add a place to put extra device-tree reading functions

Some functions deal with structured data rather than simple data types.
It makes sense to have these in their own file. For now this

dm: core: Add a place to put extra device-tree reading functions

Some functions deal with structured data rather than simple data types.
It makes sense to have these in their own file. For now this just has a
function to read a flashmap entry. Move the data types also.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-video

edid: Add HDMI flag to timing info

Some DVI monitors don't show anything in HDMI mode since audio stream
confuses them. To solve this situation, this commit adds HDMI flag in
timing data and sets it

edid: Add HDMI flag to timing info

Some DVI monitors don't show anything in HDMI mode since audio stream
confuses them. To solve this situation, this commit adds HDMI flag in
timing data and sets it accordingly during edid parsing.

First existence of extension block is checked. If it exists and it is
CEA861 extension, then data blocks are checked for presence of HDMI
vendor specific data block. If it is present, HDMI flag is set.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Allow boards to initialize the DT at runtime.

In some boards like the Raspberry Pi the initial bootloader will pass
a DT to the kernel. When using U-Boot as such kernel, the board code in
U-Boot sho

Allow boards to initialize the DT at runtime.

In some boards like the Raspberry Pi the initial bootloader will pass
a DT to the kernel. When using U-Boot as such kernel, the board code in
U-Boot should be able to provide U-Boot with this, already assembled
device tree blob.

This patch introduces a new config option CONFIG_OF_BOARD to use instead
of CONFIG_OF_EMBED or CONFIG_OF_SEPARATE which will initialize the DT
from a board-specific funtion instead of bundling one with U-Boot or as
a separated file. This allows boards like the Raspberry Pi to reuse the
device tree passed from the bootcode.bin and start.elf firmware
files, including the run-time selected device tree overlays.

Signed-off-by: Alex Deymo <deymo@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-socfpga

fdt: Add compatible strings for Arria 10

Add compatible strings for Intel Arria 10 SoCFPGA device.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan

fdt: Add compatible strings for Arria 10

Add compatible strings for Intel Arria 10 SoCFPGA device.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

show more ...

Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze

fdt: add memory bank decoding functions for board setup

Add two functions for use by board implementations to decode the memory
banks of the /memory node so as to populate the global data with
ram_s

fdt: add memory bank decoding functions for board setup

Add two functions for use by board implementations to decode the memory
banks of the /memory node so as to populate the global data with
ram_size and board info for memory banks.

The fdtdec_setup_memory_size() function decodes the first memory bank
and sets up the gd->ram_size with the size of the memory bank. This
function should be called from the boards dram_init().

The fdtdec_setup_memory_banksize() function decode the memory banks
(up to the CONFIG_NR_DRAM_BANKS) and populates the base address and size
into the gd->bd->bi_dram array of banks. This function should be called
from the boards dram_init_banksize().

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Michal Simek <monstr@monstr.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-uniphier

usb: uniphier: remove UniPhier xHCI driver and select DM_USB

This driver has not been converted to Driver Model, and it is an
obstacle to migrate other block device drivers. Remove it for now.

The

usb: uniphier: remove UniPhier xHCI driver and select DM_USB

This driver has not been converted to Driver Model, and it is an
obstacle to migrate other block device drivers. Remove it for now.

The UniPhier SoCs already use a DM-based EHCI driver, so now
ARCH_UNIPHIER can select DM_USB.

These two changes must be done atomically because removing the
legacy driver causes a build error.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>

show more ...

Merge git://git.denx.de/u-boot-dm

fdt: allow fdtdec_get_addr_size_*() to translate addresses

Some code may want to read reg values from DT, but from nodes that aren't
associated with DM devices, so using dev_get_addr_index() isn't
a

fdt: allow fdtdec_get_addr_size_*() to translate addresses

Some code may want to read reg values from DT, but from nodes that aren't
associated with DM devices, so using dev_get_addr_index() isn't
appropriate. In this case, fdtdec_get_addr_size_*() are the functions to
use. However, "translation" (via the chain of ranges properties in parent
nodes) may still be desirable. Add a function parameter to request that,
and implement it. Update all call sites to default to the original
behaviour.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Squashed in build fix from Stephen:
Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge git://git.denx.de/u-boot-nand-flash

mtd: nand: Add the sunxi NAND controller driver

We already have an SPL driver for the sunxi NAND controller, now add
the normal/standard one.

The source has been copied from Linux 4.6 with a few ch

mtd: nand: Add the sunxi NAND controller driver

We already have an SPL driver for the sunxi NAND controller, now add
the normal/standard one.

The source has been copied from Linux 4.6 with a few changes to make
it work in u-boot.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>

show more ...

sandbox: Find keyboard driver using driver model

The cros-ec keyboard is always a child of the cros-ec node. Rather than
searching the device tree, looking at the children. Remove the compat string

sandbox: Find keyboard driver using driver model

The cros-ec keyboard is always a child of the cros-ec node. Rather than
searching the device tree, looking at the children. Remove the compat string
which is now unused.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

fdt: Drop unused exynos compatible strings

A few drivers have moved to driver model, so we can drop these strings.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jaehoon Chung <jh80.chung@

fdt: Drop unused exynos compatible strings

A few drivers have moved to driver model, so we can drop these strings.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>

show more ...

x86: fdt: Drop the unused compatible strings in fdtdec

We have drivers for several more devices now, so drop the strings which are
no-longer used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Revi

x86: fdt: Drop the unused compatible strings in fdtdec

We have drivers for several more devices now, so drop the strings which are
no-longer used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-tegra

fdt: Drop some unused compatible strings

We have driver-model drivers for some of these now, so drop them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>