Merge branch 'master' of git://git.denx.de/u-boot-net

drivers: net: vsc9953: Add LAG support

You can now configure LAG on VSC9953's ports using the command:
ethsw [port <port_no>] aggr {[help] | show | <lag_group_no>}

A port must belong to a single LA

drivers: net: vsc9953: Add LAG support

You can now configure LAG on VSC9953's ports using the command:
ethsw [port <port_no>] aggr {[help] | show | <lag_group_no>}

A port must belong to a single LAG. By default, a port
belongs to a LAG equal to the port's number.

For each frame, a hash will be calculated based on
Source/Destination MAC addresses, Source/Destination IP(v4/v6)
addresses, Source/Destination ports. This hash will be used to
select a single egress port from LAG. This also assures
that frames from the same flow will always have the
same egress port.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

Merge remote-tracking branch 'u-boot/master'

Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

drivers/net/vsc9953: Add commands for VLAN ingress filtering

The command:
ethsw [port <port_no>] ingress filtering
{ [help] | show | enable | disable }
- enable/disable VLAN ingress filtering

drivers/net/vsc9953: Add commands for VLAN ingress filtering

The command:
ethsw [port <port_no>] ingress filtering
{ [help] | show | enable | disable }
- enable/disable VLAN ingress filtering on port

can be used to enable/disable/show VLAN ingress filtering on a port.
This command has also been added to the ethsw generic parser
from common/cmd_ethsw.c

Signed-off-by: Johnson Leung <johnson.leung@freescale.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <yorksun@freescale.com>

show more ...

drivers/net/vsc9953: Add command for shared/private VLAN learning

The command:
ethsw vlan fdb { [help] | show | shared | private }
- make VLAN learning shared or private"

configures the FDB to sha

drivers/net/vsc9953: Add command for shared/private VLAN learning

The command:
ethsw vlan fdb { [help] | show | shared | private }
- make VLAN learning shared or private"

configures the FDB to share the FDB entries learned on multiple VLANs
or to keep them separated. By default, the FBD uses private VLAN
learning. This command has also been added to the ethsw generic parser
from common/cmd_ethsw.c

Signed-off-by: Johnson Leung <johnson.leung@freescale.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <yorksun@freescale.com>

show more ...

drivers/net/vsc9953: Add VLAN commands for VSC9953

The new added commands can be used to configure VLANs for a port
on both ingress and egress.

The new commands are:
ethsw [port <port_no>] pvid { [

drivers/net/vsc9953: Add VLAN commands for VSC9953

The new added commands can be used to configure VLANs for a port
on both ingress and egress.

The new commands are:
ethsw [port <port_no>] pvid { [help] | show | <pvid> }
- set/show PVID (ingress and egress VLAN tagging) for a port;
ethsw [port <port_no>] vlan { [help] | show | add <vid> | del <vid> }
- add a VLAN to a port (VLAN members);
ethsw [port <port_no>] untagged { [help] | show | all | none | pvid }
- set egress tagging mod for a port"
ethsw [port <port_no>] egress tag { [help] | show | pvid | classified }
- Configure VID source for egress tag. Tag's VID could be the
frame's classified VID or the PVID of the port
These commands have also been added to the ethsw generic parser from
common/cmd_ethsw.c

Signed-off-by: Johnson Leung <johnson.leung@freescale.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <yorksun@freescale.com>

show more ...

drivers/net/vsc9953: Add commands to manipulate the FDB for VSC9953

The new command:
ethsw [port <port_no>] [vlan <vid>] fdb
{ [help] | show | flush | { add | del } <mac> }

Can be used to a

drivers/net/vsc9953: Add commands to manipulate the FDB for VSC9953

The new command:
ethsw [port <port_no>] [vlan <vid>] fdb
{ [help] | show | flush | { add | del } <mac> }

Can be used to add and delete FDB entries. Also, the command can be used
to show entries from the FDB tables. When used with [port <port_no>]
and [vlan <vid>], only the matching the FDB entries can be seen or
flushed. The command has also been added to the generic ethsw parser
from cmd_ethsw.c.

Signed-off-by: Johnson Leung <johnson.leung@freescale.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <yorksun@freescale.com>

show more ...

drivers/net/vsc9953: Add commands to enable/disable HW learning

The command:
ethsw [port <port_no>] learning { [help] | show | auto | disable }

can be used to enable/disable HW learning on a port.

drivers/net/vsc9953: Add commands to enable/disable HW learning

The command:
ethsw [port <port_no>] learning { [help] | show | auto | disable }

can be used to enable/disable HW learning on a port.
This patch also adds this command to the generic ethsw parser from
cmd_ethsw.

Signed-off-by: Johnson Leung <johnson.leung@freescale.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <yorksun@freescale.com>

show more ...

drivers/net/vsc9953: Add command to show/clear port counters

The new added command:
ethsw [port <port_no>] statistics { [help] | [clear] }

will print counters like the number of Rx/Tx frames,
numbe

drivers/net/vsc9953: Add command to show/clear port counters

The new added command:
ethsw [port <port_no>] statistics { [help] | [clear] }

will print counters like the number of Rx/Tx frames,
number of Rx/Tx bytes, number of Rx/Tx unicast frames, etc.
This patch also adds this commnd in the genereric ethsw
parser from cmd_ethsw.c

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <yorksun@freescale.com>

show more ...

common/cmd_ethsw: Add generic commands for Ethernet Switches

This patch creates a flexible parser for Ethernet Switch
configurations that should support complex commands.
The parser searches for pre

common/cmd_ethsw: Add generic commands for Ethernet Switches

This patch creates a flexible parser for Ethernet Switch
configurations that should support complex commands.
The parser searches for predefined keywords in the command
and calls the proper function when a match is found.
Also, the parser allows for optional keywords, such as
"port", to apply the command on a port
or on all ports. For now, the defined commands are:
ethsw [port <port_no>] { enable | disable | show }

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

show more ...