Merge branch 'next-dev' into thunder-boot

usb: dwc3: add dis-u1u2-quirk to reject enter U1 and U2

The DWC3 with Innosilicon USB 3.0 PHY on Rockchip platforms
(e.g. rk3328, rk1808) has problem to exit to U0 state from
U1 or U2 state when DWC

usb: dwc3: add dis-u1u2-quirk to reject enter U1 and U2

The DWC3 with Innosilicon USB 3.0 PHY on Rockchip platforms
(e.g. rk3328, rk1808) has problem to exit to U0 state from
U1 or U2 state when DWC3 work as peripheral mode. This patch
adds a quirk to reject transition to U1 and U2 state to
workaround this issue.

Refer to commit aaa5c055cc06 ("usb: dwc3: add dis-u1u2-quirk to
reject enter U1 and U2") in Rockchip Linux Kernel-4.4 .

Change-Id: I1f4176caab3ccdc31ba7eb06684267833bf804db
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>

show more ...

UPSTREAM: usb: dwc3: Add phy interface for dwc3_uboot

U-Boot has two different variants of dwc3 initializations,
- with dm variant gadget, so the respective dm driver would
call the dwc3_init in c

UPSTREAM: usb: dwc3: Add phy interface for dwc3_uboot

U-Boot has two different variants of dwc3 initializations,
- with dm variant gadget, so the respective dm driver would
call the dwc3_init in core.
- with non-dm variant gadget, so the usage board file would
call dwc3_uboot_init in core.

The driver probe would handle all respective gadget properties
including phy interface via phy_type property and then trigger
dwc3_init for dm-variant gadgets.

So, to support the phy interface for non-dm variant gadgets,
the better option is dwc3_uboot_init since there is no
dedicated controller for non-dm variant gadgets.

This patch support for adding phy interface like 8/16-bit UTMI+
code for dwc3_uboot.

This change used Linux phy.h enum list, to make proper code
compatibility.

Conflicts:
drivers/usb/dwc3/core.h

Change-Id: I626e2428b548a2624fead5418ecb8f7571c77e89
Cc: Marek Vasut <marex@denx.de>
Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
(cherry picked from commit 6b7ebff00190649d2136b34f6feebc0dbe85bfdc)

show more ...

UPSTREAM: dwc3: move phy operation to core.c

Those operations can be used for peripheral operation as well as host
operation.

Change-Id: Ifa3b83bd690cd11f6750fd893e6ac36b2a0214b3
Signed-off-by: Jea

UPSTREAM: dwc3: move phy operation to core.c

Those operations can be used for peripheral operation as well as host
operation.

Change-Id: Ifa3b83bd690cd11f6750fd893e6ac36b2a0214b3
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
(cherry picked from commit d648a50c0a27452a5439e7982b23b97c64820430)

show more ...

usb: dwc3: init phy utmi width in platform data

On rk3399 board, we need to configure phy interface UTMI+ width
to 16 bits via the property "snps,phyif-utmi-bits" of dwc3 node.
But we can't the get

usb: dwc3: init phy utmi width in platform data

On rk3399 board, we need to configure phy interface UTMI+ width
to 16 bits via the property "snps,phyif-utmi-bits" of dwc3 node.
But we can't the get the property from kernel dtb. So this patch
initialize the phy interface UTMI+ width in dwc3 platform data,
and not dependent on the property in dtb.

Change-Id: I3f6b05e0d72806242a128c85f82b260f61ac4f95
Signed-off-by: William Wu <william.wu@rock-chips.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

Merge branch 'master' of git://git.denx.de/u-boot-usb

Modified:
configs/ls1012afrdm_qspi_defconfig
configs/ls1012aqds_qspi_defconfig
configs/ls1012ardb_qspi_defconfig
include/configs/ls1012afrdm

Merge branch 'master' of git://git.denx.de/u-boot-usb

Modified:
configs/ls1012afrdm_qspi_defconfig
configs/ls1012aqds_qspi_defconfig
configs/ls1012ardb_qspi_defconfig
include/configs/ls1012afrdm.h
include/configs/ls1012aqds.h
include/configs/ls1012ardb.h

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

usb: dwc3: Correct datatype of base to unsigned long

Correct type of varibale base to unsigned long as
keeping it as int causes usb failures if MSB of
the base address is set.

Signed-off-by: Siva D

usb: dwc3: Correct datatype of base to unsigned long

Correct type of varibale base to unsigned long as
keeping it as int causes usb failures if MSB of
the base address is set.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

dwc3: core: added an API to invoke irq handlers

Since interrupt support is not present in u-boot, added an
API to handle the interrupts in dwc3 core. This API can be
polled to handle the interrupts.

dwc3: core: added an API to invoke irq handlers

Since interrupt support is not present in u-boot, added an
API to handle the interrupts in dwc3 core. This API can be
polled to handle the interrupts.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>

show more ...

dwc3: core: add support for multiple dwc3 controllers

Added support for multiple dwc3 controllers. This gives uboot
the capability to control multiple dwc3 controllers.

Signed-off-by: Kishon Vijay

dwc3: core: add support for multiple dwc3 controllers

Added support for multiple dwc3 controllers. This gives uboot
the capability to control multiple dwc3 controllers.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>

show more ...

include: dwc3-uboot: add a structure for populating platform data

Added a structure to populate dwc3 core platform data. The board file should
populate these platform data before invoking dwc3 drive

include: dwc3-uboot: add a structure for populating platform data

Added a structure to populate dwc3 core platform data. The board file should
populate these platform data before invoking dwc3 driver.
This will be removed once we have dwc3 driver adapted to use the driver model.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>

show more ...