Convert CONFIG_CMD_EEPROM et al to Kconfig

This converts the following to Kconfig:
CONFIG_CMD_EEPROM
CONFIG_CMD_EEPROM_LAYOUT
CONFIG_EEPROM_LAYOUT_HELP_STRING

Signed-off-by: Simon Glass <s

Convert CONFIG_CMD_EEPROM et al to Kconfig

This converts the following to Kconfig:
CONFIG_CMD_EEPROM
CONFIG_CMD_EEPROM_LAYOUT
CONFIG_EEPROM_LAYOUT_HELP_STRING

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Rework Kconfig logic slightly, define EEPROM location on TI eval
platforms]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge tag 'xilinx-for-v2017.05' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2017.05

- Move to DM clk driver
- Add clk support for zynq_sdhci

zynq: Move zynq to clock framework

Move the zynq to clock framework and remove unused functions as well as
the CONFIG_ZYNQ_PS_CLK_FREQ configuration.

Signed-off-by: Stefan Herbrechtsmeier <stefan.h

zynq: Move zynq to clock framework

Move the zynq to clock framework and remove unused functions as well as
the CONFIG_ZYNQ_PS_CLK_FREQ configuration.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze

zynq: config: Enable CONFIG_SYS_NO_FLASH through defconfig

Enable config CONFIG_SYS_NO_FLASH through defconfig
for all zynq boards.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Si

zynq: config: Enable CONFIG_SYS_NO_FLASH through defconfig

Enable config CONFIG_SYS_NO_FLASH through defconfig
for all zynq boards.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

usb: Kconfig: Add Kconfigs entry USB_EHCI_ZYNQ

Add Kconfig entry config option for USB_EHCI_ZYNQ
and update the same to enable for all zynq boards
which supports USB

Signed-off-by: Siva Durga Prasa

usb: Kconfig: Add Kconfigs entry USB_EHCI_ZYNQ

Add Kconfig entry config option for USB_EHCI_ZYNQ
and update the same to enable for all zynq boards
which supports USB

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze

ARM: zynq: zybo: Enabling reading MAC address from EEPROM

Zybo has on board I2C EEPROM which contains preprogrammed MAC address.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal

ARM: zynq: zybo: Enabling reading MAC address from EEPROM

Zybo has on board I2C EEPROM which contains preprogrammed MAC address.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM: zynq: Enable EDID for zybo

Zybo contains on board HDMI that's why enable EDID.
Doing it via config because zynq i2c driver hasn't been moved to DM yet
and enabling via Kconfig requires DM_I2C.

ARM: zynq: Enable EDID for zybo

Zybo contains on board HDMI that's why enable EDID.
Doing it via config because zynq i2c driver hasn't been moved to DM yet
and enabling via Kconfig requires DM_I2C.
This will be moved that driver is moved to DM.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM: zynq: Remove ZYNQ_BOOT_FREEBSD option

Remove CONFIG_ZYNQ_BOOT_FREEBSD configuration option and setup
CONFIG_SYS_MMC_MAX_DEVICE 1 for all Zynq boards.

Signed-off-by: Michal Simek <michal.simek@

ARM: zynq: Remove ZYNQ_BOOT_FREEBSD option

Remove CONFIG_ZYNQ_BOOT_FREEBSD configuration option and setup
CONFIG_SYS_MMC_MAX_DEVICE 1 for all Zynq boards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM: zynq: Read memory size setting from DT

OF_CONTROL is setup by default and memory reading is done via DT. Remove
all config files with memory references.

Signed-off-by: Michal Simek <michal.sim

ARM: zynq: Read memory size setting from DT

OF_CONTROL is setup by default and memory reading is done via DT. Remove
all config files with memory references.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

mmc: Kconfig: Add Arasan SDHCI entry

Add Arasan SDHCI entry to Kconfig and fix all references.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze

arm: zynq: Update ZYBO config options

Update the ZYBO device tree and enable config options that relate to the
added devices in the device tree.

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>

arm: zynq: Update ZYBO config options

Update the ZYBO device tree and enable config options that relate to the
added devices in the device tree.

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze

net: gem: Move gem to Kconfig

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>

Merge git://git.denx.de/u-boot

arm: zynq: Move serial driver to driver model

Update this driver to use driver model and change all users.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xi

arm: zynq: Move serial driver to driver model

Update this driver to use driver model and change all users.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

zynq: zybo: Move CONFIG_DEFAULT_DEVICE_TREE to defconfig

This is a MIME GnuPG-signed message. If you see this text, it means that
your E-mail or Usenet software does not support MIME signed message

zynq: zybo: Move CONFIG_DEFAULT_DEVICE_TREE to defconfig

This is a MIME GnuPG-signed message. If you see this text, it means that
your E-mail or Usenet software does not support MIME signed messages.
The Internet standard for MIME PGP messages, RFC 2015, was published in 1996.
To open this message correctly you will need to install E-mail or Usenet
software that supports modern Internet standards.

Move CONFIG_DEFAULT_DEVICE_TREE from board config
directly to defconfig.

This patch removes compilation warning:
include/configs/zynq_zybo.h:24:0: warning: "CONFIG_DEFAULT_DEVICE_TREE"
redefined [enabled by default]
#define CONFIG_DEFAULT_DEVICE_TREE zynq-zybo

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze

configs: zynq: Add config support for ZYBO

This patch adds config support needed for ZYBO target and has
been tested on Rev. B ZYBO hardware.

Signed-off-by: Tinghui Wang <steven.wang@digilentinc.co

configs: zynq: Add config support for ZYBO

This patch adds config support needed for ZYBO target and has
been tested on Rev. B ZYBO hardware.

Signed-off-by: Tinghui Wang <steven.wang@digilentinc.com>
[PC changes:
* Dropped boards.cfg change (rebase conflict)
* Dropped custom u-boot env
* Added DTS
* Misc forward-porting changes
]
Signed-off-by: Peter Crosthwiate <crosthwaite.peter@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...