usb: gadget: Move CONFIG_USB_GADGET to Kconfig

The description was borrowed from kernel. "tristate" type was changed
to "bool" (I believe we don't support modules for u-boot yet, right?).
CONFIG_USB

usb: gadget: Move CONFIG_USB_GADGET to Kconfig

The description was borrowed from kernel. "tristate" type was changed
to "bool" (I believe we don't support modules for u-boot yet, right?).
CONFIG_USB_GADGET requires CONFIG_USB to be defined too, so add it along
as well.

Definitions were added to defconfig files in a way that
"make savedefconfig" generates exactly the same file as used defconfig.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
[trini: Add zynq_zc702 conversion]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Move CONFIG_OF_LIBFDT to Kconfig

Move this option to Kconfig and tidy up existing boards.

Signed-off-by: Simon Glass <sjg@chromium.org>

ARM: zynq: zynqmp: Enable DCC serial driver by default

Compile DCC serial driver by default.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Merge branch 'master' of git://git.denx.de/u-boot-spi

ARM: zynq: Wire-up saving environment to QSPI

Extend options for saving variables to QSPI.

Reviewed-by: Jagan Teki <jteki@openedev.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

ARM: zynq: Enable Realtek phys by default

This phy is available at Zybo board.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

zynq-common: Fix usbboot env variable

Remove the miss-placed \0 and add missing ; for usbboot env variable.

Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>
Signed-off-by: Michal Simek <michal.sim

zynq-common: Fix usbboot env variable

Remove the miss-placed \0 and add missing ; for usbboot env variable.

Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM: zynq: Enable SPL RAM support by default

Use RAM support in jtagboot mode.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>

ARM: zynq: Remove ZYNQ_BOOT_FREEBSD option

Remove CONFIG_ZYNQ_BOOT_FREEBSD configuration option and setup
CONFIG_SYS_MMC_MAX_DEVICE 1 for all Zynq boards.

Signed-off-by: Michal Simek <michal.simek@

ARM: zynq: Remove ZYNQ_BOOT_FREEBSD option

Remove CONFIG_ZYNQ_BOOT_FREEBSD configuration option and setup
CONFIG_SYS_MMC_MAX_DEVICE 1 for all Zynq boards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

mmc: Kconfig: Add Arasan SDHCI entry

Add Arasan SDHCI entry to Kconfig and fix all references.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze

ARM: zynq: Move FLASH_BAR to Kconfig

Clean up config and use Kconfig more.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze

ARM: zynq: Extend malloc size

SPL DM MMC FAT requires more malloc space(3k fat buffers + dm)
that it is available now. Extend SPL malloc space.

Current OCM layout:
0xffff0000 - 0xfff2000 - Full mal

ARM: zynq: Extend malloc size

SPL DM MMC FAT requires more malloc space(3k fat buffers + dm)
that it is available now. Extend SPL malloc space.

Current OCM layout:
0xffff0000 - 0xfff2000 - Full malloc space
0xffff2000 - 0xffff300 - Stack location
0xfffff300 - CONFIG_SYS_MALLOC_F_LEN - Early malloc space
0xfffffd00 - sizeof(GD) - GD
0xfffffe00 - 0xffffffff - SoC specific boot code

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM: zynq: Fix location of stack and malloc areas

The patch
"board_init: Change the logic to setup malloc_base"
(sha1: 9ac4fc82071ce346e3885118242ff45d22f69b82)
breaks SPL for Zynq because it puts e

ARM: zynq: Fix location of stack and malloc areas

The patch
"board_init: Change the logic to setup malloc_base"
(sha1: 9ac4fc82071ce346e3885118242ff45d22f69b82)
breaks SPL for Zynq because it puts early alloc area on the stack which
caused that stack was decreased by CONFIG_SYS_MALLOC_F_LEN (0x400)
and there was not enough space for regular stack.

This patch changes memory layout to better utilize the last 64k OCM
block.
0xffff0000 - 0xfff1000 - Full malloc space
0xffff1000 - 0xffff300 - Stack location
0xfffff300 - CONFIG_SYS_MALLOC_F_LEN - Early malloc space
0xfffffd00 - sizeof(GD) - GD
0xfffffe00 - 0xffffffff - SoC specific boot code

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Moritz Fischer <moritz.fischer@ettus.com>

show more ...

net: gem: Move gem to Kconfig

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>

net: gem: Move driver to DM

- Enable DM_ETH by default for Zynq and ZynqMP
- Remove board_eth_init code
- Change miiphy_read function to return value instead of error code
based on DM requirement

net: gem: Move driver to DM

- Enable DM_ETH by default for Zynq and ZynqMP
- Remove board_eth_init code
- Change miiphy_read function to return value instead of error code
based on DM requirement
- Do not enable EMIO DT support by default

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

ARM: zynq: Remove CONFIG_API

CONFIG_API is causing compilation error when DM_ETH is enabled because
eth_get_dev() is not available.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by

ARM: zynq: Remove CONFIG_API

CONFIG_API is causing compilation error when DM_ETH is enabled because
eth_get_dev() is not available.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>

show more ...

ARM: zynq: Remove PHYLIB from config to defconfig

Move PHYLIB from board config to defconfig

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>

sf: Move SPI flash drivers to defconfig

There are already Kconfig options for SPI flash drivers, but we
have not moved them from config.h to defconfig files. This commit
does this in a batch.

Signe

sf: Move SPI flash drivers to defconfig

There are already Kconfig options for SPI flash drivers, but we
have not moved them from config.h to defconfig files. This commit
does this in a batch.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze

zynq: sdhci: Define max clock by macro

zc1571 with silicon can operate on 200MHz maximum frequency. Setup this
frequency by default and fix setting for ep108.

Signed-off-by: Michal Simek <michal.si

zynq: sdhci: Define max clock by macro

zc1571 with silicon can operate on 200MHz maximum frequency. Setup this
frequency by default and fix setting for ep108.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM: zynq: Choose boot image based on OF_SEPARATE macro

OF_CONTROL is enabled by default for all Zynq boards.
The difference between two boot images is done by OF_SEPARATE
or OF_EMBED macros.

Signe

ARM: zynq: Choose boot image based on OF_SEPARATE macro

OF_CONTROL is enabled by default for all Zynq boards.
The difference between two boot images is done by OF_SEPARATE
or OF_EMBED macros.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

common: add CMD_GPIO to Kconfig

Add CMD_GPIO to Kconfig and run tools/moveconfig.py .

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Simon Glass <sjg@chromium.org>

Merge git://git.denx.de/u-boot