ARM: k2g: Add clock information

Add clock information for Galileo

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Mugunthan V N <mug

ARM: k2g: Add clock information

Add clock information for Galileo

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>

show more ...

ARM: dts: k2hk: Enable OF_CONTROL and DM

Import k2hk specific DT files from Linux Kernel and enable
OF_CONTROL, DM, DM_SERIAL.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

ARM: keystone2: spl: Fix stack allocation with CONFIG_SYS_MALLOC_F_LEN

If CONFIG_SYS_MALLOC_F_LEN is enabled, the stack is moved down to the
specified size to make the malloc function available befo

ARM: keystone2: spl: Fix stack allocation with CONFIG_SYS_MALLOC_F_LEN

If CONFIG_SYS_MALLOC_F_LEN is enabled, the stack is moved down to the
specified size to make the malloc function available before relocation.
But on keystone platforms SYS_SPL_MALLOC is immediately preceding stack,
which is causing an overlap with this config enabled.
So leave a gap between malloc space and stack space.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

show more ...

ARM: keystone2: configs: Move SP to end of u-boot section

Currently u-boot stack is defined at the beginning of MSMC RAM.
This is a problem for uart boot mode as ROM downloads directly to
starting o

ARM: keystone2: configs: Move SP to end of u-boot section

Currently u-boot stack is defined at the beginning of MSMC RAM.
This is a problem for uart boot mode as ROM downloads directly to
starting of MSMC RAM.
Fixing it by moving stack to the end of u-boot section and shifting
SYS_TEXT_BASE to the start of MSMC RAM.
Updated division of MSMC RAM is shown below:
-----------------------------------------
| | | |
| U-Boot text |U-Boot | SPL text |
| download | Stack | Download + |
| | | SPL_BSS + |
| | | SPL_STACK |
-----------------------------------------
[1] [2] [3] [4]

[1] SYS_TEXT_BASE (Start of MSMC RAM)
[2] SPL_TEXT_BASE - GBL_DATA_SIZE
[3] SPL_TEXT_BASE
[4] END of SPL

[1] + [2] is at least 1M on all platforms, so no chance of overlap.

Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

show more ...

configs: ti_armv7_keystone2: increase size reserved for initrd

9MB reserved for initrd is not enough for default ramfs used for keystone
devices, which is ~33MB. This patch increases the size up to

configs: ti_armv7_keystone2: increase size reserved for initrd

9MB reserved for initrd is not enough for default ramfs used for keystone
devices, which is ~33MB. This patch increases the size up to 80MB.

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>

show more ...

configs: ti_armv7_keystone2: fix initrd address at args_ramfs

This patch set the correct initrd address to much rdaddr, which used at
get_fs_ramfs commad.

Fixes: 3e97f0b63c8e ("configs: ti_armv7_ke

configs: ti_armv7_keystone2: fix initrd address at args_ramfs

This patch set the correct initrd address to much rdaddr, which used at
get_fs_ramfs commad.

Fixes: 3e97f0b63c8e ("configs: ti_armv7_keystone2: switch addresses
to generic addresses")

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>

show more ...

ARM: keystone2: Enable CONFIG_DISPLAY_CPUINFO

Add print_cpuinfo() function and enable
CONFIG_DISPLAY_CPUINFO for keystone platforms,
so that cpu info can be displayed during boot.

Reviewed-by: Tom

ARM: keystone2: Enable CONFIG_DISPLAY_CPUINFO

Add print_cpuinfo() function and enable
CONFIG_DISPLAY_CPUINFO for keystone platforms,
so that cpu info can be displayed during boot.

Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

show more ...

configs: ti_armv7_keystone2: replace addr_uboot with loadaddr

This patch replaces not existing addr_uboot environment variable by
loadaddr at get_uboot_net and burn_uboot_xxx commands. Otherwise the

configs: ti_armv7_keystone2: replace addr_uboot with loadaddr

This patch replaces not existing addr_uboot environment variable by
loadaddr at get_uboot_net and burn_uboot_xxx commands. Otherwise these
commands are broken.

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>

show more ...

configs: ti_armv7_keystone2: switch to using kernel zImage

Switch to using zImage instead of uImage. and while at it, start using
bootz as default. While at it, get rid of BOOTIMAGE define and start

configs: ti_armv7_keystone2: switch to using kernel zImage

Switch to using zImage instead of uImage. and while at it, start using
bootz as default. While at it, get rid of BOOTIMAGE define and start
using Linux upstream dtb file names.

Reviewed-by: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

configs: ti_armv7_keystone2: switch addresses to generic addresses

Use the defaults defined in DEFAULT_LINUX_BOOT_ENV

Reviewed-by: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Tom Rini <trin

configs: ti_armv7_keystone2: switch addresses to generic addresses

Use the defaults defined in DEFAULT_LINUX_BOOT_ENV

Reviewed-by: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

configs: ti_armv7_keystone2: start using armv7_common

Try to maintain as much commonality by conditionally including stuff
in armv7_common as necessary and removing the common defines from
keystone2

configs: ti_armv7_keystone2: start using armv7_common

Try to maintain as much commonality by conditionally including stuff
in armv7_common as necessary and removing the common defines from
keystone2 header.

Note: as part of this change, all keystone2 platforms will now start
using the generic u-boot prompt instead of the custom prompt.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

configs: rename ks2_evm into ti_armv7_keystone2

rename the keystone2 common header into an keystone2 architecture
specific header which can then reuse the common ti_armv7 config headers.

Acked-by:

configs: rename ks2_evm into ti_armv7_keystone2

rename the keystone2 common header into an keystone2 architecture
specific header which can then reuse the common ti_armv7 config headers.

Acked-by: Vitaly Andrianov <vitalya@ti.com>
Acked-By: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...