Remove superfluous uses of V_PROMPT macro.

A number of config files define the V_PROMPT macro for the
command-line prompt, only to immediately use that macro to define
CONFIG_SYS_PROMPT, making V_PR

Remove superfluous uses of V_PROMPT macro.

A number of config files define the V_PROMPT macro for the
command-line prompt, only to immediately use that macro to define
CONFIG_SYS_PROMPT, making V_PROMPT entirely superfluous.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-usb

OMAP3 beagle Add usbtty configuration

The primary console of beagle is the serial header.

A secondary console is to use the usbtty. The user can set this
manually by doing

setenv stdout usbtty; s

OMAP3 beagle Add usbtty configuration

The primary console of beagle is the serial header.

A secondary console is to use the usbtty. The user can set this
manually by doing

setenv stdout usbtty; setenv stdin usbtty; setenv stderr usbtty
saveenv

usbtty will be usable by accessing the /dev/ttyACM0 on a linux host.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>

show more ...

Merge branch 'next' of ../next

common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL

There is more and more usage of printing 64bit values,
so enable this feature generally, and delete the
CONFIG_SYS_64BIT_VSPRINT

common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL

There is more and more usage of printing 64bit values,
so enable this feature generally, and delete the
CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
defines.

Signed-off-by: Heiko Schocher <hs@denx.de>

show more ...

Merge branch 'next-sync' of git://git.denx.de/u-boot-arm into next

OMAP3:SDRC: introduce DDR types

Micron DDR timings based on:
http://www.sakoman.net/cgi-bin/gitweb.cgi?p=x-load-omap3.git;a=blob;f=include/asm/arch-omap3/mem.h;h=e6fbfe3947f5d0d85fea776e30821d401731

OMAP3:SDRC: introduce DDR types

Micron DDR timings based on:
http://www.sakoman.net/cgi-bin/gitweb.cgi?p=x-load-omap3.git;a=blob;f=include/asm/arch-omap3/mem.h;h=e6fbfe3947f5d0d85fea776e30821d4017316d86;hb=HEAD

Introduce Micron DDR timings and provide
CONFIG_OMAP3_INFINEON_DDR and CONFIG_OMAP3_MICRON_DDR config
options to allow for platform files to setup their timings as
per the type of DDR selected

Reported-by: Steve Sakoman in http://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page=y

Signed-off-by: Nishanth Menon <nm@ti.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts:

board/eukrea/cpu9260/cpu9260.c
drivers/serial/serial_s5pc1xx.c
include/asm-arm/arch-s5pc1xx/clock.h
include/asm-arm/arch-s5pc1xx

Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts:

board/eukrea/cpu9260/cpu9260.c
drivers/serial/serial_s5pc1xx.c
include/asm-arm/arch-s5pc1xx/clock.h
include/asm-arm/arch-s5pc1xx/gpio.h
include/asm-arm/arch-s5pc1xx/pwm.h
include/asm-arm/arch-s5pc1xx/uart.h
include/configs/cpu9260.h
include/configs/cpuat91.h
include/configs/davinci_dm355evm.h
include/linux/mtd/samsung_onenand.h

show more ...

Merge branch 'master' of /home/wd/git/u-boot/custodians

Merge branch 'master-sync' of git://git.denx.de/u-boot-arm

TI: OMAP3: Remove SZ_xx references

This patch removes dependency on the sizes.h header file
and removes all references to SZ_xx.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

OMAP3: Update Overo and Beagle environment

Update default environment to support new kernel DSS2 subsystem and
simplify rootfs type and location changes.

Signed-off-by: Steve Sakoman <sakoman@gmail

OMAP3: Update Overo and Beagle environment

Update default environment to support new kernel DSS2 subsystem and
simplify rootfs type and location changes.

Signed-off-by: Steve Sakoman <sakoman@gmail.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

show more ...

TI OMAP3 Use arm init sequence to initialize i2c

This changes fixes an early i2c error.

It appears that I2C is working because once a read or write
error is detected, the omap24xx_i2c driver calls

TI OMAP3 Use arm init sequence to initialize i2c

This changes fixes an early i2c error.

It appears that I2C is working because once a read or write
error is detected, the omap24xx_i2c driver calls i2c_init
inside its error handling check.

While it is ok to attempt error handling this way, the boards
must not depend on this side effect to initialize it's i2c.

Instead of explicitly calling i2c_init for every board, use
the generic arm initialization in lib_arm/board.c. By defining
the config variable CONFIG_HARD_I2C, the omap3 i2c initialization
is included in the init_sequence table.

Run tested on Beagle.
Compile tested on the omap3's

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Acked-by: Dirk Behme <dirk.behme@googlemail.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-arm

TI OMAP3 Use arm init sequence to initialize i2c

This changes fixes an early i2c error.

It appears that I2C is working because once a read or write
error is detected, the omap24xx_i2c driver calls

TI OMAP3 Use arm init sequence to initialize i2c

This changes fixes an early i2c error.

It appears that I2C is working because once a read or write
error is detected, the omap24xx_i2c driver calls i2c_init
inside its error handling check.

While it is ok to attempt error handling this way, the boards
must not depend on this side effect to initialize it's i2c.

Instead of explicitly calling i2c_init for every board, use
the generic arm initialization in lib_arm/board.c. By defining
the config variable CONFIG_HARD_I2C, the omap3 i2c initialization
is included in the init_sequence table.

Run tested on Beagle.
Compile tested on the omap3's

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Acked-by: Dirk Behme <dirk.behme@googlemail.com>

show more ...

omap3: remove typedefs for configuration structs

Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

omap3: embedd gpmc_cs into gpmc config struct

Embedd chip select configuration into struct for gpmc config
instead of having it completely separated as suggested by
Wolfgang Denk on
http://lists.den

omap3: embedd gpmc_cs into gpmc config struct

Embedd chip select configuration into struct for gpmc config
instead of having it completely separated as suggested by
Wolfgang Denk on
http://lists.denx.de/pipermail/u-boot/2009-May/052247.html

Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-i2c

OMAP3 Move twl4030 power and led functions

Because twl4030 now has its own device files, move exiting
omap3 power_init_r to a new location.

power_init_r is the only function in board/omap3/common.

OMAP3 Move twl4030 power and led functions

Because twl4030 now has its own device files, move exiting
omap3 power_init_r to a new location.

power_init_r is the only function in board/omap3/common.
It initializes the twl4030 power for the board and enables
the led.

The power part of the the function is moved to twl4030_power_init in
drivers/power/twl4030.c The power compilation is conditional on the
existing config variable CONFIG_TWL4030_POWER.

The led part is moved to twl4030_led_init in the new file
drivers/misc/twl4030_led.c The led compilation is conditional on
the new config variable CONFIG_TWL4030_LED

The directory board/omap3/common was removed because power_init_r
was the only function in it.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Heiko Schocher <hs@denx.de>

show more ...

NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...

Commit 8d2effea added a warning for configurations that use NAND
without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF

NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...

Commit 8d2effea added a warning for configurations that use NAND
without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but
failed to fix the affected boards.

This patch covers the non-PPC boards that were missed in the previous
patch (commit 170c1972).

Signed-off-by: Wolfgang Denk <wd@denx.de>

show more ...

Merge branch 'next' of ../master

mtd: MTD related config header changes (mtdparts command)

By changing the cmd_mtdparts to only use the MTD infrastructure and
not the direct interface to the CFI NOR FLASH driver we now need
to add

mtd: MTD related config header changes (mtdparts command)

By changing the cmd_mtdparts to only use the MTD infrastructure and
not the direct interface to the CFI NOR FLASH driver we now need
to add the MTD infrastructure to all boards using those mtdparts
commands. This patch adds those components:

CONFIG_MTD_DEVICE (for all FLASH types)

plus

CONFIG_FLASH_CFI_MTD (for NOR FLASH)

To all board maintainers: Please test this on your platforms and
report any problems/issues found. Thanks.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Ron Madrid <info@sheldoninst.com>
Cc: Georg Schardt <schardt@team-ctech.de>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Martin Krause <martin.krause@tqs.de>
Cc: Gary Jennejohn <garyj@denx.de>
Cc: Ricardo Ribalda <ricardo.ribalda@uam.es>

show more ...

OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>

Merge branch 'master' of git://git.denx.de/u-boot-arm

OMAP3: Remove legacy NAND defines

Remove remaining legacy NAND defines for Beagle, EVM, Overo and Pandora.

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>