1 /* 2 * (C) Copyright 2006-2008 3 * Texas Instruments. 4 * Richard Woodruff <r-woodruff2@ti.com> 5 * Syed Mohammed Khasim <x0khasim@ti.com> 6 * 7 * Configuration settings for the TI OMAP3530 Beagle board. 8 * 9 * See file CREDITS for list of people who contributed to this 10 * project. 11 * 12 * This program is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License as 14 * published by the Free Software Foundation; either version 2 of 15 * the License, or (at your option) any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, write to the Free Software 24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 25 * MA 02111-1307 USA 26 */ 27 28 #ifndef __CONFIG_H 29 #define __CONFIG_H 30 31 /* 32 * High Level Configuration Options 33 */ 34 #define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ 35 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 36 #define CONFIG_OMAP34XX 1 /* which is a 34XX */ 37 #define CONFIG_OMAP3430 1 /* which is in a 3430 */ 38 #define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */ 39 40 #include <asm/arch/cpu.h> /* get chip and board defs */ 41 #include <asm/arch/omap3.h> 42 43 /* 44 * Display CPU and Board information 45 */ 46 #define CONFIG_DISPLAY_CPUINFO 1 47 #define CONFIG_DISPLAY_BOARDINFO 1 48 49 /* Clock Defines */ 50 #define V_OSCK 26000000 /* Clock output from T2 */ 51 #define V_SCLK (V_OSCK >> 1) 52 53 #undef CONFIG_USE_IRQ /* no support for IRQs */ 54 #define CONFIG_MISC_INIT_R 55 56 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 57 #define CONFIG_SETUP_MEMORY_TAGS 1 58 #define CONFIG_INITRD_TAG 1 59 #define CONFIG_REVISION_TAG 1 60 61 /* 62 * Size of malloc() pool 63 */ 64 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ 65 /* Sector */ 66 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 67 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ 68 /* initial data */ 69 70 /* 71 * Hardware drivers 72 */ 73 74 /* 75 * NS16550 Configuration 76 */ 77 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 78 79 #define CONFIG_SYS_NS16550 80 #define CONFIG_SYS_NS16550_SERIAL 81 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 82 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 83 84 /* 85 * select serial console configuration 86 */ 87 #define CONFIG_CONS_INDEX 3 88 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 89 #define CONFIG_SERIAL3 3 /* UART3 on Beagle Rev 2 */ 90 91 /* allow to overwrite serial and ethaddr */ 92 #define CONFIG_ENV_OVERWRITE 93 #define CONFIG_BAUDRATE 115200 94 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 95 115200} 96 #define CONFIG_MMC 1 97 #define CONFIG_OMAP3_MMC 1 98 #define CONFIG_DOS_PARTITION 1 99 100 /* DDR - I use Micron DDR */ 101 #define CONFIG_OMAP3_MICRON_DDR 1 102 103 /* commands to include */ 104 #include <config_cmd_default.h> 105 106 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 107 #define CONFIG_CMD_FAT /* FAT support */ 108 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 109 #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ 110 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 111 #define MTDIDS_DEFAULT "nand0=nand" 112 #define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ 113 "1920k(u-boot),128k(u-boot-env),"\ 114 "4m(kernel),-(fs)" 115 116 #define CONFIG_CMD_I2C /* I2C serial bus support */ 117 #define CONFIG_CMD_MMC /* MMC support */ 118 #define CONFIG_CMD_NAND /* NAND support */ 119 120 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ 121 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 122 #undef CONFIG_CMD_IMI /* iminfo */ 123 #undef CONFIG_CMD_IMLS /* List all found images */ 124 #undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ 125 #undef CONFIG_CMD_NFS /* NFS support */ 126 127 #define CONFIG_SYS_NO_FLASH 128 #define CONFIG_HARD_I2C 1 129 #define CONFIG_SYS_I2C_SPEED 100000 130 #define CONFIG_SYS_I2C_SLAVE 1 131 #define CONFIG_SYS_I2C_BUS 0 132 #define CONFIG_SYS_I2C_BUS_SELECT 1 133 #define CONFIG_DRIVER_OMAP34XX_I2C 1 134 135 /* 136 * TWL4030 137 */ 138 #define CONFIG_TWL4030_POWER 1 139 #define CONFIG_TWL4030_LED 1 140 141 /* 142 * Board NAND Info. 143 */ 144 #define CONFIG_NAND_OMAP_GPMC 145 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 146 /* to access nand */ 147 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 148 /* to access nand at */ 149 /* CS0 */ 150 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 151 152 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ 153 /* devices */ 154 #define CONFIG_JFFS2_NAND 155 /* nand device jffs2 lives on */ 156 #define CONFIG_JFFS2_DEV "nand0" 157 /* start of jffs2 partition */ 158 #define CONFIG_JFFS2_PART_OFFSET 0x680000 159 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ 160 /* partition */ 161 162 /* Environment information */ 163 #define CONFIG_BOOTDELAY 10 164 165 #define CONFIG_EXTRA_ENV_SETTINGS \ 166 "loadaddr=0x82000000\0" \ 167 "console=ttyS2,115200n8\0" \ 168 "vram=12M\0" \ 169 "dvimode=1024x768MR-16@60\0" \ 170 "defaultdisplay=dvi\0" \ 171 "mmcroot=/dev/mmcblk0p2 rw\0" \ 172 "mmcrootfstype=ext3 rootwait\0" \ 173 "nandroot=/dev/mtdblock4 rw\0" \ 174 "nandrootfstype=jffs2\0" \ 175 "mmcargs=setenv bootargs console=${console} " \ 176 "vram=${vram} " \ 177 "omapfb.mode=dvi:${dvimode} " \ 178 "omapfb.debug=y " \ 179 "omapdss.def_disp=${defaultdisplay} " \ 180 "root=${mmcroot} " \ 181 "rootfstype=${mmcrootfstype}\0" \ 182 "nandargs=setenv bootargs console=${console} " \ 183 "vram=${vram} " \ 184 "omapfb.mode=dvi:${dvimode} " \ 185 "omapfb.debug=y " \ 186 "omapdss.def_disp=${defaultdisplay} " \ 187 "root=${nandroot} " \ 188 "rootfstype=${nandrootfstype}\0" \ 189 "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ 190 "bootscript=echo Running bootscript from mmc ...; " \ 191 "source ${loadaddr}\0" \ 192 "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ 193 "mmcboot=echo Booting from mmc ...; " \ 194 "run mmcargs; " \ 195 "bootm ${loadaddr}\0" \ 196 "nandboot=echo Booting from nand ...; " \ 197 "run nandargs; " \ 198 "nand read ${loadaddr} 280000 400000; " \ 199 "bootm ${loadaddr}\0" \ 200 201 #define CONFIG_BOOTCOMMAND \ 202 "if mmc init; then " \ 203 "if run loadbootscript; then " \ 204 "run bootscript; " \ 205 "else " \ 206 "if run loaduimage; then " \ 207 "run mmcboot; " \ 208 "else run nandboot; " \ 209 "fi; " \ 210 "fi; " \ 211 "else run nandboot; fi" 212 213 #define CONFIG_AUTO_COMPLETE 1 214 /* 215 * Miscellaneous configurable options 216 */ 217 #define V_PROMPT "OMAP3 beagleboard.org # " 218 219 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 220 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 221 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 222 #define CONFIG_SYS_PROMPT V_PROMPT 223 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 224 /* Print Buffer Size */ 225 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 226 sizeof(CONFIG_SYS_PROMPT) + 16) 227 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 228 /* Boot Argument Buffer Size */ 229 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 230 231 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ 232 /* works on */ 233 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 234 0x01F00000) /* 31MB */ 235 236 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ 237 /* load address */ 238 239 /* 240 * OMAP3 has 12 GP timers, they can be driven by the system clock 241 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 242 * This rate is divided by a local divisor. 243 */ 244 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 245 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 246 #define CONFIG_SYS_HZ 1000 247 248 /*----------------------------------------------------------------------- 249 * Stack sizes 250 * 251 * The stack sizes are set up in start.S using the settings below 252 */ 253 #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ 254 #ifdef CONFIG_USE_IRQ 255 #define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ 256 #define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ 257 #endif 258 259 /*----------------------------------------------------------------------- 260 * Physical Memory Map 261 */ 262 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 263 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 264 #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ 265 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 266 267 /* SDRAM Bank Allocation method */ 268 #define SDRC_R_B_C 1 269 270 /*----------------------------------------------------------------------- 271 * FLASH and environment organization 272 */ 273 274 /* **** PISMO SUPPORT *** */ 275 276 /* Configure the PISMO */ 277 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 278 #define PISMO1_ONEN_SIZE GPMC_SIZE_128M 279 280 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ 281 /* one chip */ 282 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ 283 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 284 285 #define CONFIG_SYS_FLASH_BASE boot_flash_base 286 287 /* Monitor at start of flash */ 288 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 289 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 290 291 #define CONFIG_ENV_IS_IN_NAND 1 292 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ 293 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 294 295 #define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec 296 #define CONFIG_ENV_OFFSET boot_flash_off 297 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 298 299 /*----------------------------------------------------------------------- 300 * CFI FLASH driver setup 301 */ 302 /* timeout values are in ticks */ 303 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) 304 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) 305 306 /* Flash banks JFFS2 should use */ 307 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ 308 CONFIG_SYS_MAX_NAND_DEVICE) 309 #define CONFIG_SYS_JFFS2_MEM_NAND 310 /* use flash_info[2] */ 311 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS 312 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 313 314 #ifndef __ASSEMBLY__ 315 extern struct gpmc *gpmc_cfg; 316 extern unsigned int boot_flash_base; 317 extern volatile unsigned int boot_flash_env_addr; 318 extern unsigned int boot_flash_off; 319 extern unsigned int boot_flash_sec; 320 extern unsigned int boot_flash_type; 321 #endif 322 323 #endif /* __CONFIG_H */ 324