imx: ventana: add usb_pgood_delay 2sec default

We have encountered many USB storage devices that require more warm-up
than the spec allows for.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

imx: ventana: config: enable EXT4 filesystem read/write support

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

imx: ventana: config: enable edid support

Enable the 'i2c edid' command to query and display data from an attached
HDMI monitor of LVDS display with an EDID device.

Example:
Ventana > i2c dev 2 &&

imx: ventana: config: enable edid support

Enable the 'i2c edid' command to query and display data from an attached
HDMI monitor of LVDS display with an EDID device.

Example:
Ventana > i2c dev 2 && i2c edid 0x50

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: config: Support ramdisk

Set the initrd_high env so that ramdisk range can be properly set.

See commit 7e9603e and README

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

imx: ventana: config: add USB Mass Storage (ums) support

Add support for the USB mass storage gadget to enable access to on-board
storage.

Example:
Ventana > ums 0 mmc 0 # provide ums access to th

imx: ventana: config: add USB Mass Storage (ums) support

Add support for the USB mass storage gadget to enable access to on-board
storage.

Example:
Ventana > ums 0 mmc 0 # provide ums access to the uSD
Ventana > ums 0 usb 0 # provide ums access to the first USB device
Ventana > ums 0 sata 0 # provide ums access to an mSATA device

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: assign default ethprime dynamically

Gateworks Ventana boards don't all use IMX6 FEC, so lets define default
ethprime based off the first detected device.

Signed-off-by: Tim Harvey <th

imx: ventana: assign default ethprime dynamically

Gateworks Ventana boards don't all use IMX6 FEC, so lets define default
ethprime based off the first detected device.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: add i210 support

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

imx: ventana: disable 4k tftp/nfs packets

I've encountered issues when using 4k packets through certain switches. For
now disable this and go back to using MTU size packets.

Signed-off-by: Tim Harv

imx: ventana: disable 4k tftp/nfs packets

I've encountered issues when using 4k packets through certain switches. For
now disable this and go back to using MTU size packets.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Merge remote-tracking branch 'u-boot/master' into 'u-boot-arm/master'

Merge git://git.denx.de/u-boot-dm

dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig

Move this option to Kconfig and update all boards.
Signed-off-by: Simon Glass <sjg@chromium.org>

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

arm: mx6: gw_ventana: Define CONFIG_SYS_MALLOC_F_LEN

This board uses setup_i2c() in SPL. The setup_i2c() function internally
calls gpio_request(), which in turn internally calls strdup(). The strdup

arm: mx6: gw_ventana: Define CONFIG_SYS_MALLOC_F_LEN

This board uses setup_i2c() in SPL. The setup_i2c() function internally
calls gpio_request(), which in turn internally calls strdup(). The strdup()
requires a running mallocator, so this patch makes the mallocator available.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Sean Cross <xobs@kosagi.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>

show more ...

Merge branch 'uboot'

spi: mxc: fix sf probe when using mxc_spi

MXC SPI driver has a feature whereas a GPIO line can be used to force CS high
across multiple transactions. This is set up by embedding the GPIO information

spi: mxc: fix sf probe when using mxc_spi

MXC SPI driver has a feature whereas a GPIO line can be used to force CS high
across multiple transactions. This is set up by embedding the GPIO information
in the CS value:

cs = (cs | gpio << 8)

This merge of cs and gpio data into one value breaks the sf probe command:
if the use of gpio is required, invoking "sf probe <cs>" will not work, because
the CS argument doesn't have the GPIO information in it. Instead, the user must
use "sf probe <cs | gpio << 8>". For example, if bank 2 gpio 30 is used to force
cs high on cs 0, bus 0, then instead of typing "sf probe 0" the user now must
type "sf probe 15872".

This is inconsistent with the description of the sf probe command, and forces
the user to be aware of implementaiton details.

Fix this by introducing a new board function: board_spi_cs_gpio(), which will
accept a naked CS value, and provide the driver with the relevant GPIO, if one
is necessary.

Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Eric Benard <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-arm

Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

imx: ventana: add pci fixup for PLX PEX860x switch GPIO

Most Gateworks Ventana boards use a PLX PEX860x PCIe switch for PCIe expansion.
These boards use GPIO on the PLX device as PERST# for the down

imx: ventana: add pci fixup for PLX PEX860x switch GPIO

Most Gateworks Ventana boards use a PLX PEX860x PCIe switch for PCIe expansion.
These boards use GPIO on the PLX device as PERST# for the downstream ports
thus we assert this when the PLX is enumerated.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

imx: ventana: add econfig command

The Gateworks Ventana EEPROM contains a set of configuration bits that
affect the removal of device-tree nodes that support peripherals that do not
exist on sub-loa

imx: ventana: add econfig command

The Gateworks Ventana EEPROM contains a set of configuration bits that
affect the removal of device-tree nodes that support peripherals that do not
exist on sub-loaded boards. This patch adds:
- a structure to define a config bit name, dt node alias, bit position
- an array of supported configuration items
- an econfig command to get/set/list configuration bits
- use of the array when adjusting the FDT prior to boot

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

Conflicts:
boards.cfg

Merge branch 'master' of git://git.denx.de/u-boot-arm

Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

Merge branch 'u-boot/master' into 'u-boot-arm/master'