Kconfig: add depends on for SPL options

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I066114702ef6442434969096cdc4e4156887c164

serial: Kconfig: default y for DEBUG_UART_ALWAYS

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: Ie40ee20335c4aaafe8e31c32438b78de41bc01fd

dm: serial: support always use uart debug mode

In this mode, uart debug is initialized depends on
configuration from pre-loader or CONFIG_UART_DEBUG_.

The serial is not care about dts "stdout-path"

dm: serial: support always use uart debug mode

In this mode, uart debug is initialized depends on
configuration from pre-loader or CONFIG_UART_DEBUG_.

The serial is not care about dts "stdout-path" and
not register into console framework any more. It's
nice to use pre-loader serial and make serial easy
to configure.

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: If4c68229d76b6f1710a35e3ef9a2a91cb306fa9c

show more ...

dm: serial/16550: rollback to upstream version

rollback to: 02234e4 UPSTREAM: usbtty: fix typos

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I84296fad2b06823afc77477ef4ef11a2f80196

dm: serial/16550: rollback to upstream version

rollback to: 02234e4 UPSTREAM: usbtty: fix typos

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I84296fad2b06823afc77477ef4ef11a2f801960a

show more ...

dm: serial: introduce DEBUG_UART_ALWAYS_MODE configure

Rename CONSOLE_SERIAL_SKIP_INIT to DEBUG_UART_ALWAYS_MODE for
easy understand.

Select this to always use debug UART, skip complicated
console

dm: serial: introduce DEBUG_UART_ALWAYS_MODE configure

Rename CONSOLE_SERIAL_SKIP_INIT to DEBUG_UART_ALWAYS_MODE for
easy understand.

Select this to always use debug UART, skip complicated
console UART register.

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I3c265840bde015fe5fd7c73d959ba0538297b7c2

show more ...

UPSTREAM: powerpc: mpc8xx: Change CONFIG_8xx to CONFIG_MPC8xx

CONFIG_8xx doesn't mean much outside of arch/powerpc/
This patch renames it CONFIG_MPC8xx just like CONFIG_MPC85xx etc ...
It also renam

UPSTREAM: powerpc: mpc8xx: Change CONFIG_8xx to CONFIG_MPC8xx

CONFIG_8xx doesn't mean much outside of arch/powerpc/
This patch renames it CONFIG_MPC8xx just like CONFIG_MPC85xx etc ...
It also renames 8xx_immap.h to immap_8xx.h to be consistent with
other file names.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
(cherry picked from commit ee1e600c13d16febd517ab7d0d2c243db174789b)
Change-Id: I564708bb6517b699749e8a54c013d032f785e459
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>

show more ...

Merge git://git.denx.de/u-boot-x86

serial: serial-uclass: Add generic serial RX buffer support

Pasting longer lines into the U-Boot console prompt sometimes leads to
characters missing. One problem here is the small 16-byte FIFO of t

serial: serial-uclass: Add generic serial RX buffer support

Pasting longer lines into the U-Boot console prompt sometimes leads to
characters missing. One problem here is the small 16-byte FIFO of the
legacy NS16550 UART, e.g. on x86 platforms.

This patch now introduces a Kconfig option to enable RX buffer support
for all DM based serial drivers. With this option enabled, I was
able paste really long lines into the U-Boot console, without any
characters missing.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

Revert "serial: ns16550: Add RX interrupt buffer support"

This reverts commit 6822cf3ec7c8768b8727573b8f4b2cb3d870b881.

As Bin Meng has tested and pointed out, we don't need the RX interrupt
for th

Revert "serial: ns16550: Add RX interrupt buffer support"

This reverts commit 6822cf3ec7c8768b8727573b8f4b2cb3d870b881.

As Bin Meng has tested and pointed out, we don't need the RX interrupt
for the RX buffer support at all. Just reading all available characters
into a buffer is sufficient to solve the problem with the dropped
characters upon long lines pasted into the U-Boot prompt. Since this
RX buffer support can be implemented in a generic way, without any
device specifica (e.g. for the ns16550), I'll post a new patch with
a new serial RX buffer support for DM, which all DM based serial
drivers can use.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

Merge branch 'rmobile' of git://git.denx.de/u-boot-sh

serial: sh: Convert to Kconfig

Convert the SH Serial to Kconfig using tools/moveconfig.py tool
and a bit of manual adjustment to cater for failed conversions.

Signed-off-by: Marek Vasut <marek.vasu

serial: sh: Convert to Kconfig

Convert the SH Serial to Kconfig using tools/moveconfig.py tool
and a bit of manual adjustment to cater for failed conversions.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

show more ...

serial: stm32x7: Convert CONFIG_STM32X7_SERIAL to Kconfig

Add CONFIG_STM32X7_SERIAL as a Kconfig option.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.ma

serial: stm32x7: Convert CONFIG_STM32X7_SERIAL to Kconfig

Add CONFIG_STM32X7_SERIAL as a Kconfig option.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>

show more ...

serial: ns16550: Add RX interrupt buffer support

Pasting longer lines into the U-Boot console prompt sometimes leads to
characters missing. One problem here is the small 16-byte FIFO of the
legacy N

serial: ns16550: Add RX interrupt buffer support

Pasting longer lines into the U-Boot console prompt sometimes leads to
characters missing. One problem here is the small 16-byte FIFO of the
legacy NS16550 UART, e.g. on x86 platforms.

This patch now introduces a Kconfig option to enable RX interrupt
buffer support for NS16550 style UARTs. With this option enabled, I was
able paste really long lines into the U-Boot console, without any
characters missing.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
[trini: Guard ns16550_serial_remove with
CONFIG_IS_ENABLED(SERIAL_PRESENT) to match struct assignment]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

serial: mxc: Add debug uart support

Add support for the debug UART to assist with early debugging.
Enable it for i.CoreM6 as an example.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Revie

serial: mxc: Add debug uart support

Add support for the debug UART to assist with early debugging.
Enable it for i.CoreM6 as an example.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

powerpc, 8xx: move Serial driver to drivers/serial/

At the same time, move to Kconfig

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>

serial, kconfig: fix menutext

fix menutext for the options SPL_DM_SERIAL and TPL_DM_SERIAL.
Both have the same text as DM_SERIAL, which is
confusing.

Signed-off-by: Heiko Schocher <hs@denx.de>
Revi

serial, kconfig: fix menutext

fix menutext for the options SPL_DM_SERIAL and TPL_DM_SERIAL.
Both have the same text as DM_SERIAL, which is
confusing.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>

show more ...

serial: omap: Support debug UART

Add debug UART functions to permit omap specific ns16550 to
provide an early debug UART. This is mostly in common with
DEBUG_UART_NS16550 except for Mode definition

serial: omap: Support debug UART

Add debug UART functions to permit omap specific ns16550 to
provide an early debug UART. This is mostly in common with
DEBUG_UART_NS16550 except for Mode definition register which
is required for selecting UART mode(16x auto-baud or 13x mode).

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-mips

serial: add serial driver for BCM6345

It is based on linux/drivers/tty/serial/bcm63xx_uart.c

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

Merge git://git.denx.de/u-boot-sunxi

sunxi: fix the default value of CONS_INDEX on non-A23/A33 SUN8I

Only A23/A33 in SUN8I want a default value of CONS_INDEX of 5, for other
chips the default value is 1 like other Allwinner SoCs.

Fix

sunxi: fix the default value of CONS_INDEX on non-A23/A33 SUN8I

Only A23/A33 in SUN8I want a default value of CONS_INDEX of 5, for other
chips the default value is 1 like other Allwinner SoCs.

Fix this default value.

The original wrong value has lead to wrong console on H3 Orange Pi
boards.

Fixes: 7095f8641863 ("sunxi: Convert CONS_INDEX to Kconfig")

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

show more ...

sunxi: Convert CONS_INDEX to Kconfig

Convert the CONS_INDEX configuration to Kconfig.
Update sunxi's defconfigs to remove SYS_EXTRA_OPTIONS variable not
needed anymore.
Default value is 1 except for

sunxi: Convert CONS_INDEX to Kconfig

Convert the CONS_INDEX configuration to Kconfig.
Update sunxi's defconfigs to remove SYS_EXTRA_OPTIONS variable not
needed anymore.
Default value is 1 except for sun5i (equals 2) and sun8i (equals 5).

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
[Maxime: Added a depends on ARCH_SUNXI to avoid build breakages]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

show more ...

Merge git://git.denx.de/u-boot-x86