| #
72912a48 |
| 17-Jan-2019 |
Adam Ford <aford173@gmail.com> |
UPSTREAM: MTD: nand: mxs_nand: Allow driver to auto setup ECC in SPL
The initialization of the NAND in SPL hard-coded ecc.bytes,
ecc.size, and ecc.strength which may work for some NAND parts,
but it
UPSTREAM: MTD: nand: mxs_nand: Allow driver to auto setup ECC in SPL
The initialization of the NAND in SPL hard-coded ecc.bytes,
ecc.size, and ecc.strength which may work for some NAND parts,
but it not appropriate for others. With the pending patch
"mxs_nand: Fix BCH read timeout error on boards requiring ECC"
the driver can auto configure the ECC when these entries are
blank. This patch has been tested in NAND flash with oob 64
and oob 128.
Change-Id: Iaa9d322e8b39bbde309993e9bb9cb53cd920e80c
Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Jörg Krause <joerg.krause@embedded.rocks>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 04568bd0b6d673a325eed76bd857a9cbd0c556bc)
show more ...
|
| #
f58e694f |
| 12-Jan-2019 |
Adam Ford <aford173@gmail.com> |
UPSTREAM: MTD: NAND: mxs_nand_init_dma: Make mxs_nand_init_dma static
mxs_nand_init_dma is only referenced from mxs_nand.c. It's not
referenced in any headers or outside code, so this patch
defines
UPSTREAM: MTD: NAND: mxs_nand_init_dma: Make mxs_nand_init_dma static
mxs_nand_init_dma is only referenced from mxs_nand.c. It's not
referenced in any headers or outside code, so this patch
defines it as static.
Change-Id: I6c1dd1690288a073b95a715c53e4bc36b154dd59
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 5645df9e00a01407730dc11d3a2bc4969203dc8c)
show more ...
|
| #
0aa53418 |
| 03-Jan-2019 |
Adam Ford <aford173@gmail.com> |
UPSTREAM: MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC
The LogicPD board uses a Micron Flash with ECC. To boot this from
SPL, the ECC needs to be correctly configured or the BC
UPSTREAM: MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC
The LogicPD board uses a Micron Flash with ECC. To boot this from
SPL, the ECC needs to be correctly configured or the BCH engine
times out.
Change-Id: I0fcdc7f4853bf01c1a7318f4384767e9cb252e2c
Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Tested-by: Jörg Krause <joerg.krause@embedded.rocks>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 5ae585ba3a8bb2336d5cb6e1ef4c80a5ef445409)
show more ...
|
| #
cfcc706c |
| 16-Aug-2018 |
Miquel Raynal <miquel.raynal@bootlin.com> |
UPSTREAM: mtd: move NAND files into a raw/ subdirectory
NAND flavors, like serial and parallel, have a lot in common and would
benefit to share code. Let's move raw (parallel) NAND specific code in
UPSTREAM: mtd: move NAND files into a raw/ subdirectory
NAND flavors, like serial and parallel, have a lot in common and would
benefit to share code. Let's move raw (parallel) NAND specific code in a
raw/ subdirectory, to ease the addition of a core file in nand/ and the
introduction of a spi/ subdirectory specific to SPI NANDs.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Change-Id: Ibb56f85620c4798fb579be3e4e30438963b7c48b
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit a430fa06a4ac50e785fdbfb7f43c3cb14b35619c)
show more ...
|