| #
3dbd2dd7 |
| 03-Dec-2018 |
T Karthik Reddy <t.karthik.reddy@xilinx.com> |
UPSTREAM: mtd: nand: arasan_nfc: Add support for nand multi chip select
This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
UPSTREAM: mtd: nand: arasan_nfc: Add support for nand multi chip select
This patch adds support for nand multi chip select.
Also adding CONFIG_SYS_NAND_MAX_CHIPS to Kconfig to specify maximum number
of nand chips.
Change-Id: I7f6a8c4f3069bfc6c5eae9196a814ee08b1bb6d4
Signed-off-by: Tummala Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 97fca6a146390e1c4a5fe4c29b68f7730229db56)
show more ...
|
| #
ce9c7df5 |
| 30-Oct-2018 |
Martin Lund <malu@gomspace.com> |
UPSTREAM: mtd: nand: Arasan: Add subpage configuration support
Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.
Currently the Linux Arasan driver does not suppo
UPSTREAM: mtd: nand: Arasan: Add subpage configuration support
Add support for disabling subpage write support via
CONFIG_SYS_NAND_NO_SUBPAGE_WRITE.
Currently the Linux Arasan driver does not support subpage writes and in
case of running UBI and accessing the same UBI volume from both U-Boot
and Linux it is required to have the same subpage write configuration
else the location of the UBI headers (EC + VID) will be misaligned
(subpage vs page) and incompatible. Hence the need for disabling
subpage write support in the U-Boot Arasan NAND driver.
Change-Id: Ifa8b66ae1a29efd8705da564ca83012fb8e1d7bd
Signed-off-by: Martin Lund <malu@gomspace.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 1cefca71d237aae2c5cc2445f7698941443a2cd9)
show more ...
|
| #
cfcc706c |
| 16-Aug-2018 |
Miquel Raynal <miquel.raynal@bootlin.com> |
UPSTREAM: mtd: move NAND files into a raw/ subdirectory
NAND flavors, like serial and parallel, have a lot in common and would
benefit to share code. Let's move raw (parallel) NAND specific code in
UPSTREAM: mtd: move NAND files into a raw/ subdirectory
NAND flavors, like serial and parallel, have a lot in common and would
benefit to share code. Let's move raw (parallel) NAND specific code in a
raw/ subdirectory, to ease the addition of a core file in nand/ and the
introduction of a spi/ subdirectory specific to SPI NANDs.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Change-Id: Ibb56f85620c4798fb579be3e4e30438963b7c48b
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit a430fa06a4ac50e785fdbfb7f43c3cb14b35619c)
show more ...
|