mmc: sdhci: Distinguish between base clock and maximum peripheral frequency

The sdhci controller assumes that the base clock frequency is fully supported by
the peripheral and doesn't support hardwa

mmc: sdhci: Distinguish between base clock and maximum peripheral frequency

The sdhci controller assumes that the base clock frequency is fully supported by
the peripheral and doesn't support hardware limitations. The Linux kernel
distinguishes between base clock (max_clk) of the host controller and maximum
frequency (f_max) of the card interface. Use the same differentiation and allow
the platform to constrain the peripheral interface.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>

show more ...

Merge branch 'master' of http://git.denx.de/u-boot-mmc

mmc: sdhci: use the generic error number

Use the generic error number instead of meaningless value.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mmc: sdhci: use the host version value in sdhci_setup_cfg

"host->version" isn't a SoC specific value.
It doesn't need to get in each SoC drivers.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.co

mmc: sdhci: use the host version value in sdhci_setup_cfg

"host->version" isn't a SoC specific value.
It doesn't need to get in each SoC drivers.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Merge git://git.denx.de/u-boot-marvell

mmc: mv_sdhci: Configure the SDHCI MBUS bridge windows

This driver did not yet configure the SDHCI MBUS bridge registers.
Without this and with CONFIG_MMC_SDMA enabled, mmc hangs at random
times. As

mmc: mv_sdhci: Configure the SDHCI MBUS bridge windows

This driver did not yet configure the SDHCI MBUS bridge registers.
Without this and with CONFIG_MMC_SDMA enabled, mmc hangs at random
times. As DMA cannot complete correctly.

Tested on db-88f6820-gp eval board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Dirk Eibach <eibach@gdsys.cc>
Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-mmc

mv_sdhci: fix warnings on 64-bit builds

Change addresses to unsigned long to be compatible with 64-bit builds.
Regardless of fixing warnings, the device is still only 32-bit capable.

Signed-off-by:

mv_sdhci: fix warnings on 64-bit builds

Change addresses to unsigned long to be compatible with 64-bit builds.
Regardless of fixing warnings, the device is still only 32-bit capable.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>

show more ...

Merge branch 'u-boot/master' into 'u-boot-arm/master'

Conflicts:
common/cmd_fpga.c
drivers/usb/host/ohci-at91.c

Merge branch 'master' of git://www.denx.de/git/u-boot-mmc

mmc: sdhci: return error when failed add_sdhci().

If failed the add_host(), it is reasonable that return value of
add_sdhci().

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: K

mmc: sdhci: return error when failed add_sdhci().

If failed the add_host(), it is reasonable that return value of
add_sdhci().

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

show more ...

Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
fsl_esdhc: fix PIO mode transfers
mmc: tegra2: Implement card-detect hook.
mmc: fsl_esdhc:

Merge branch 'master' of /home/wd/git/u-boot/custodians

* 'master' of /home/wd/git/u-boot/custodians:
fsl_esdhc: fix PIO mode transfers
mmc: tegra2: Implement card-detect hook.
mmc: fsl_esdhc: Implement card-detect hook.
mmc: Implement card detection.
mmc: Change board_mmc_getcd() function prototype.
drivers/mmc/mv_sdhci.c: Fix build warning
ftsdc010: improve performance and capability
mmc: add host_caps checking avoid switch card improperly
i.mx: fsl_esdhc: add the i.mx6q support

show more ...

drivers/mmc/mv_sdhci.c: Fix build warning

Fix:
mv_sdhci.c: In function 'mv_sdh_init':
mv_sdhci.c:47:22: warning: the comparison will always
evaluate as 'true' for the address of 'mv_sdhci_writeb'
wi

drivers/mmc/mv_sdhci.c: Fix build warning

Fix:
mv_sdhci.c: In function 'mv_sdh_init':
mv_sdhci.c:47:22: warning: the comparison will always
evaluate as 'true' for the address of 'mv_sdhci_writeb'
will never be NULL [-Waddress]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Andy Fleming <afleming@freescale.com>
Acked-by: Lei Wen <leiwen@marvell.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-mmc

* 'master' of git://git.denx.de/u-boot-mmc:
Revert "mmc: retry the cmd8 to meet 74 clocks requirement in the spec"
mmc: mv_sdhci: Fix host v

Merge branch 'master' of git://git.denx.de/u-boot-mmc

* 'master' of git://git.denx.de/u-boot-mmc:
Revert "mmc: retry the cmd8 to meet 74 clocks requirement in the spec"
mmc: mv_sdhci: Fix host version read for Armada100

show more ...

mmc: mv_sdhci: Fix host version read for Armada100

sdhci_readw does not work for host version read in Armada100 series
SoCs. This patch fix this issue by making a sdhci_readl call to get host
versio

mmc: mv_sdhci: Fix host version read for Armada100

sdhci_readw does not work for host version read in Armada100 series
SoCs. This patch fix this issue by making a sdhci_readl call to get host
version.

Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-mmc

* 'master' of git://git.denx.de/u-boot-mmc:
tegra2: Move MMC clock initialization into MMC driver
mmc: sdhci: fix sdma bug for large file tr

Merge branch 'master' of git://git.denx.de/u-boot-mmc

* 'master' of git://git.denx.de/u-boot-mmc:
tegra2: Move MMC clock initialization into MMC driver
mmc: sdhci: fix sdma bug for large file transfer
mmc: sdhci: add timeout for data transfer
mmc: sdhci: add mmc structure for host
mmc: sdhci: fix build warning
mmc: sdhci: fix cache flush
mmc: CMD7:MMC_CMD_SELECT_CARD response fix
mmc: test mmc bus width on startup
mmc: change magic number to macro define
mmc: mv_sdhci: fix 8bus width access for 88SV331xV5
mmc: retry the cmd8 to meet 74 clocks requirement in the spec
PXA: Add MMC driver using the generic MMC framework

show more ...

mmc: mv_sdhci: fix 8bus width access for 88SV331xV5

Marvell 88SV331xV5 platform's sdhci host control is not very standard
with the spec in the 8bit handling. It need to set its private register
to s

mmc: mv_sdhci: fix 8bus width access for 88SV331xV5

Marvell 88SV331xV5 platform's sdhci host control is not very standard
with the spec in the 8bit handling. It need to set its private register
to switch to the 8bit mode which is not included in the standard sdhci
registers.

This patch mainly hacks the writeb method, and set its private register
if it find the driver is going to switch to the 8bit mode.

Signed-off-by: Lei Wen <leiwen@marvell.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-mmc

* 'master' of git://git.denx.de/u-boot-mmc:
mmc: rescan fails on empty slot
AT91:mmc:fix multiple read/write error
mmc: Access mode valida

Merge branch 'master' of git://git.denx.de/u-boot-mmc

* 'master' of git://git.denx.de/u-boot-mmc:
mmc: rescan fails on empty slot
AT91:mmc:fix multiple read/write error
mmc: Access mode validation for eMMC cards > 2 GiB
mmc: sh_mmcif: add support for Renesas MMCIF
mmc: fix the condition for MMC version 4
MMC: add marvell sdhci driver
MMC: add sdhci generic framework
MMC: add erase function to both mmc and sd
MMC: unify mmc read and write operation
mmc: Tegra2: Enable SD/MMC driver for Seaboard and Harmony
mmc: Tegra2: SD/MMC driver for Seaboard - eMMC on SDMMC4, SDIO on SDMMC3

show more ...

MMC: add marvell sdhci driver

This could support both armada100 and pantheon serial in the mainline,
while this driver also be tested to support upcoming mg, mmp2 and mmp3
hardware.

Signed-off-by:

MMC: add marvell sdhci driver

This could support both armada100 and pantheon serial in the mainline,
while this driver also be tested to support upcoming mg, mmp2 and mmp3
hardware.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Andy Fleming <afleming@freescale.com>

show more ...