dw_mmc: add default power enable config value for rk3576

Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Change-Id: I2ce85f3c107c51b84413ca2f9ae66b33e4a00c18

mmc: add CONFIG_MMC_SIMPLE

Delete hs200 & hs400 & some redundant code.

Signed-off-by: Jason Zhu <jason.zhu@rock-chips.com>
Change-Id: I10a61d79357a192a7f978e2b8dea5d4b582bd2af

UPSTREAM: board: arm: Add support for Broadcom BCM7445

Add support for loading U-Boot on the Broadcom 7445 SoC. This port
assumes Broadcom's BOLT bootloader is acting as the second stage
bootloader

UPSTREAM: board: arm: Add support for Broadcom BCM7445

Add support for loading U-Boot on the Broadcom 7445 SoC. This port
assumes Broadcom's BOLT bootloader is acting as the second stage
bootloader, and U-Boot is acting as the third stage bootloader, loaded
as an ELF program by BOLT.

Change-Id: I79d19ced6ed7c76a862b94162a92ceaddf09b062
Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org>
Cc: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 894c3ad27fa940beb7fdc07d01dcfe81c03d0481)

show more ...

drivers: mmc: add config SUPPORT_EMMC_RPMB

Signed-off-by: Jason Zhu <jason.zhu@rock-chips.com>
Change-Id: I372f2b6fd2bde318e39f20e41b4237c6d1b962bd

UPSTREAM: mmc: add a Kconfig option to enable the support for MMC write operations

This allows using CONFIG_IS_ENABLED(MMC_WRITE) to compile out code
needed only if write support is required.
The op

UPSTREAM: mmc: add a Kconfig option to enable the support for MMC write operations

This allows using CONFIG_IS_ENABLED(MMC_WRITE) to compile out code
needed only if write support is required.
The option is added for u-boot and for SPL

Change-Id: Ibb3836ed8713e491238460783a85ee1808770f66
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Jason Zhu <jason.zhu@rock-chips.com>
(cherry picked from commit d6400c3f8520bb9a203fe397039279c80f093c27)

show more ...

Merge branch 'next-dev' into thunder-boot

drivers: mmc: use pre-configure set by pre-loader or bootrom

The MMC is initialized by pre-loader or bootrom, so it is no need to
initialize it again. Open this config to skip some unused initialize

drivers: mmc: use pre-configure set by pre-loader or bootrom

The MMC is initialized by pre-loader or bootrom, so it is no need to
initialize it again. Open this config to skip some unused initialized
process.

Signed-off-by: Jason Zhu <jason.zhu@rock-chips.com>
Change-Id: If00fc3ce7df4d15e71ecfd8f8717a59640c3b7a9

show more ...

UPSTREAM: Convert CONFIG_APBH_DMA et al to Kconfig

This converts the following to Kconfig:
CONFIG_APBH_DMA
CONFIG_APBH_DMA_BURST
CONFIG_APBH_DMA_BURST8

Signed-off-by: Adam Ford <aford173@g

UPSTREAM: Convert CONFIG_APBH_DMA et al to Kconfig

This converts the following to Kconfig:
CONFIG_APBH_DMA
CONFIG_APBH_DMA_BURST
CONFIG_APBH_DMA_BURST8

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
[trini: Add in MMC as well]
Change-Id: I45b919ab747aa414ba23f1e165c11dd8aff44c44
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 99bec1aead5927c54f4364bfe10823a86fe0dad2)

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-sunxi

mmc: sunxi: Support new mode

Almost all of the newer Allwinner SoCs have a new operating mode for the
eMMC clocks that needs to be enabled in both the clock and the MMC
controller.

Details about th

mmc: sunxi: Support new mode

Almost all of the newer Allwinner SoCs have a new operating mode for the
eMMC clocks that needs to be enabled in both the clock and the MMC
controller.

Details about that mode are sparse, and the name itself (new mode vs old
mode) doesn't give much details, but it seems that the it changes the
sampling of the MMC clock. One side effect is also that it divides the
parent clock rate by 2.

Add support for it through a Kconfig option.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-mmc

dm: mmc: Drop CONFIG_DM_MMC_OPS

All boards which use DM_MMC have now been converted to use DM_MMC_OPS.
Drop the option and good riddance.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: mmc: Correct Kconfig condition for SPL_DM_MMC_OPS

This should depend on SPL_DM_MMC, not SPL_DM. For it and update the only
affected board's defconfig.

Signed-off-by: Simon Glass <sjg@chromium.o

dm: mmc: Correct Kconfig condition for SPL_DM_MMC_OPS

This should depend on SPL_DM_MMC, not SPL_DM. For it and update the only
affected board's defconfig.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge git://git.denx.de/u-boot-mmc

dm: mmc: Allow disabling driver model in SPL

At present if U-Boot proper uses driver model for MMC, then SPL has to
also. While this is desirable, it places a significant barrier to moving
to driver

dm: mmc: Allow disabling driver model in SPL

At present if U-Boot proper uses driver model for MMC, then SPL has to
also. While this is desirable, it places a significant barrier to moving
to driver model in some cases. For example, with a space-constrained SPL
it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves
adjusting some drivers.

Add new SPL versions of the options for DM_MMC, DM_MMC_OPS and BLK. By
default these follow their non-SPL versions, but this can be changed by
boards which need it.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-mmc

mmc: sh_sdhi: Fix Kconfig entry

The Kconfig entry depends on RMOBILE, but this was renamed
to ARCH_RMOBILE in commit 1cc95f6e1b38 (ARM: Rmobile: Rename
CONFIG_RMOBILE to CONFIG_ARCH_RMOBILE) . Fix t

mmc: sh_sdhi: Fix Kconfig entry

The Kconfig entry depends on RMOBILE, but this was renamed
to ARCH_RMOBILE in commit 1cc95f6e1b38 (ARM: Rmobile: Rename
CONFIG_RMOBILE to CONFIG_ARCH_RMOBILE) . Fix this omission.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-mmc

- Add #undef CONFIG_DM_MMC_OPS to omap3_logic in the SPL build case, to
match other TI platforms in the same situation.

Signed-off-by: Tom Ri

Merge branch 'master' of git://git.denx.de/u-boot-mmc

- Add #undef CONFIG_DM_MMC_OPS to omap3_logic in the SPL build case, to
match other TI platforms in the same situation.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

mmc: replace CONFIG_GENERIC_MMC with CONFIG_MMC

Now CONFIG_GENERIC_MMC and CONFIG_MMC match for all defconfig.
We do not need two options for the same feature. Deprecate the
former.

This commit wa

mmc: replace CONFIG_GENERIC_MMC with CONFIG_MMC

Now CONFIG_GENERIC_MMC and CONFIG_MMC match for all defconfig.
We do not need two options for the same feature. Deprecate the
former.

This commit was generated with the sed script 's/GENERIC_MMC/MMC/'
and manual fixup of drivers/mmc/Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

show more ...

drivers: omap_hsmmc: move to DM_MMC_OPS

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Merge branch 'master' of git://git.denx.de/u-boot-mmc

mmc: gen_atmel_mci: add driver model support for mci

Add the driver model support for Atmel mci while retaining the
existing legacy code. This allows the driver to support boards
that have converted

mmc: gen_atmel_mci: add driver model support for mci

Add the driver model support for Atmel mci while retaining the
existing legacy code. This allows the driver to support boards
that have converted to driver model as well as those that have not.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

mmc: meson: add MMC driver for Meson GX (S905)

This driver implements MMC support on Meson GX (S905) based systems.
It's based on Carlo Caione's work, changes:
- BLK support added
- general refactor

mmc: meson: add MMC driver for Meson GX (S905)

This driver implements MMC support on Meson GX (S905) based systems.
It's based on Carlo Caione's work, changes:
- BLK support added
- general refactoring

Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Vagrant Cascadian <vagrant@debian.org>

show more ...

Merge git://git.denx.de/u-boot-tegra

mmc: tegra: allow disabling external clock loopback

Introduce CONFIG_TEGRA124_MMC_DISABLE_EXT_LOOPBACK to disable the external clock
loopback and use the internal one on SDMMC3 as per the SDMMC_VEND

mmc: tegra: allow disabling external clock loopback

Introduce CONFIG_TEGRA124_MMC_DISABLE_EXT_LOOPBACK to disable the external clock
loopback and use the internal one on SDMMC3 as per the SDMMC_VENDOR_MISC_CNTRL_0
register's SDMMC_SPARE1 bits being set to 0xfffd according to the TRM.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...