treewide: replace with error() with pr_err()

U-Boot widely uses error() as a bit noisier variant of printf().

This macro causes name conflict with the following line in
include/linux/compiler-gcc.h

treewide: replace with error() with pr_err()

U-Boot widely uses error() as a bit noisier variant of printf().

This macro causes name conflict with the following line in
include/linux/compiler-gcc.h:

# define __compiletime_error(message) __attribute__((error(message)))

This prevents us from using __compiletime_error(), and makes it
difficult to fully sync BUILD_BUG macros with Linux. (Notice
Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().)

Let's convert error() into now treewide-available pr_err().

Done with the help of Coccinelle, excluing tools/ directory.

The semantic patch I used is as follows:

// <smpl>
@@@@
-error
+pr_err
(...)
// </smpl>

Change-Id: I921807c1770d36a91e692c48ab477558bb2ed0b8
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Re-run Coccinelle]
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit 9b643e312d528f291966c1f30b0d90bf3b1d43dc)

show more ...

Merge git://git.denx.de/u-boot-usb

dfu: remove limitation on partition size

Change long (32 bits on arm) to u64 (same type than offset)
for size and read offset r_left

So partition and device used for DFU can be greater than 4GB

Si

dfu: remove limitation on partition size

Change long (32 bits on arm) to u64 (same type than offset)
for size and read offset r_left

So partition and device used for DFU can be greater than 4GB

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>

show more ...

dfu: allow dfu read on partition greater than 2GB

solve issue on get_medium_size() function
the detection of error is a simple test < 0
but for ARM platform, long is 32bits and 2GB = 0x80000000
is s

dfu: allow dfu read on partition greater than 2GB

solve issue on get_medium_size() function
the detection of error is a simple test < 0
but for ARM platform, long is 32bits and 2GB = 0x80000000
is seen as error.

I solve the issue by changing the prototype fo the function
to separate size and result.
This patch prepare the next patch with size change to u64.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>

show more ...

Merge branch 'master' of git://www.denx.de/git/u-boot-usb

dfu: ram: fix number base of RAM entity parameters

U-Boot typically interprets unprefixed numbers as base 16, and DFU RAM
entity parsing has historically done so. Reverse the change to default
to ba

dfu: ram: fix number base of RAM entity parameters

U-Boot typically interprets unprefixed numbers as base 16, and DFU RAM
entity parsing has historically done so. Reverse the change to default
to base 10, so that values in previously working command-lines aren't
mis-parsed, causing RAM corruption, crashes, hangs, etc.

Fixes: 6aeb877afef0 ("drivers: dfu: ram: fix a crash with dfu ram with invalid dfu_alt_info env")

Cc: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
[Test HW: AM335x BBB]

show more ...

drivers: dfu: ram: fix a crash with dfu ram with invalid dfu_alt_info env

U-Boot crashes when an invalid dfu_alt_info is set and tried
using dfu command. Fixing this as it is handled in dfu-mmc.

=>

drivers: dfu: ram: fix a crash with dfu ram with invalid dfu_alt_info env

U-Boot crashes when an invalid dfu_alt_info is set and tried
using dfu command. Fixing this as it is handled in dfu-mmc.

=> dfu 0 ram 0
data abort
pc : [<9ff893d6>] lr : [<9ff6edb9>]
reloc pc : [<808323d6>] lr : [<80817db9>]
sp : 9ef36cf0 ip : 00000158 fp : 9ffbc0b8
r10: 9ffbc0b8 r9 : 9ef36ed8 r8 : 00000000
r7 : 00000000 r6 : 9ffbc0c8 r5 : 9ef36cfc r4 : 9ef392c8
r3 : 00000004 r2 : 00000000 r1 : 9ff9a985 r0 : ffffffff
Flags: Nzcv IRQs off FIQs on Mode SVC_32
Resetting CPU ...

resetting ...

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

dfu: defer parsing of device string to IO backend

Devices are not all identified by a single integer. To support
this, defer the parsing of the device string to the IO backed, so that
it can apply t

dfu: defer parsing of device string to IO backend

Devices are not all identified by a single integer. To support
this, defer the parsing of the device string to the IO backed, so that
it can apply the appropriate rules.

SPI devices are specified as controller:chip_select. SPI/SF support will
be added soon.

MMC devices can also be specified as controller[.hwpart][:partition] in
many commands, although we don't support that syntax in DFU.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

show more ...

dfu: fix some issues with reads/uploads

DFU read support appears to rely upon dfu->read_medium() updating the
passed-by-reference len parameter to indicate the remaining size
available for reading.

dfu: fix some issues with reads/uploads

DFU read support appears to rely upon dfu->read_medium() updating the
passed-by-reference len parameter to indicate the remaining size
available for reading.

dfu_read_medium_mmc() never does this, and the implementation of
dfu_read_medium_nand() will only work if called just once; it hard-codes
the value to the total size of the NAND device irrespective of read
offset.

I believe that overloading dfu->read_medium() is confusing. As such,
this patch introduces a new function dfu->get_medium_size() which can
be used to explicitly find out the medium size, and nothing else.
dfu_read() is modified to use this function to set the initial value for
dfu->r_left, rather than attempting to use the side-effects of
dfu->read_medium() for this purpose.

Due to this change, dfu_read() must initially set dfu->b_left to 0, since
no data has been read.

dfu_read_buffer_fill() must also be modified not to adjust dfu->r_left
when simply copying data from dfu->i_buf_start to the upload request
buffer. r_left represents the amount of data left to be read from HW.
That value is not affected by the memcpy(), but only by calls to
dfu->read_medium().

After this change, I can read from either a 4MB or 1.5MB chunk of a 4MB
eMMC boot partion with CONFIG_SYS_DFU_DATA_BUF_SIZE==1MB. Without this
change, attempting to do that would result in DFU read returning no data
at all due to r_left never being set.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

show more ...

dfu: ram support

DFU spec mentions it as a method to upgrade firmware (software stored
in writable non-volatile memory). It also says other potential uses of
DFU is beyond scope of the spec.

Here s

dfu: ram support

DFU spec mentions it as a method to upgrade firmware (software stored
in writable non-volatile memory). It also says other potential uses of
DFU is beyond scope of the spec.

Here such a beyond the scope use is being attempted - directly pumping
binary images from host via USB to RAM. This facility is a developer
centric one in that it gives advantage over upgrading non-volatile
memory for testing new images every time during development and/or
testing.

Directly putting image onto RAM would speed up upgrade process. This and
convenience was the initial thoughts that led to doing this, speed
improvement over MMC was only 1 second though - 6 sec on RAM as opposed
to 7 sec on MMC in beagle bone, perhaps enabling cache and/or optimizing
DFU framework to avoid multiple copy for ram (if worth) may help, and
on other platforms and other boot media like NAND maybe improvement
would be higher.

And for a platform that doesn't yet have proper DFU suppport for
non-volatile media's, DFU to RAM can be used.

Another minor advantage would be to increase life of mmc/nand as it
would be less used during development/testing.

usage: <image name> ram <start address> <size>
eg. kernel ram 0x81000000 0x1000000

Downloading images to RAM using DFU is not something new, this is
acheived in openmoko also.

DFU on RAM can be used for extracting RAM contents to host using dfu
upload. Perhaps this can be extended to io for squeezing out register
dump through usb, if it is worth.

Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Gerhard Sittig <gsi@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Heiko Schocher <hs@denx.de>

show more ...