Merge branch 'next-dev' into thunder-boot

UPSTREAM: usb: host: replace xhci-keystone driver by the generic dwc3 driver

The keystone platforms can use the generic DC3 driver. Removing the
keystone-spcecific xchi driver and add the configurat

UPSTREAM: usb: host: replace xhci-keystone driver by the generic dwc3 driver

The keystone platforms can use the generic DC3 driver. Removing the
keystone-spcecific xchi driver and add the configuration options to enable
the generic DWC3 driver on all K2 platforms.

Conflicts:
configs/k2e_evm_defconfig
configs/k2e_hs_evm_defconfig
configs/k2g_evm_defconfig
configs/k2g_hs_evm_defconfig
configs/k2hk_evm_defconfig
configs/k2hk_hs_evm_defconfig
configs/k2l_evm_defconfig
configs/k2l_hs_evm_defconfig
drivers/usb/host/xhci-keystone.c

Change-Id: I0d708152a220704d24b86c528ee7ace2b0b05a4a
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
(cherry picked from commit 4dd76d0f96ab18a2bda622ec4dac822e908dd069)

show more ...

UPSTREAM: Convert CONFIG_SPI to Kconfig

This converts the following to Kconfig:
CONFIG_SPI

This partly involves updating code that assumes that CONFIG_SPI implies
things that are specific to the

UPSTREAM: Convert CONFIG_SPI to Kconfig

This converts the following to Kconfig:
CONFIG_SPI

This partly involves updating code that assumes that CONFIG_SPI implies
things that are specific to the MPC8xx SPI driver. For now, just update
the CONFIG tests. This also involves reworking the default for
CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
reasonable default, as it does not cause any compile failures.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
(cherry picked from commit f1b1f77060beadbfe9f42a3be00019bd025afbd6)
Change-Id: Ie9f15ada869105eb407f41d4df7eecbaa916b940
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>

show more ...

UPSTREAM: Convert CONFIG_DAVINCI_SPI to Kconfig

This converts the following to Kconfig:
CONFIG_DAVINCI_SPI

Signed-off-by: Adam Ford <aford173@gmail.com>
(cherry picked from commit 26410c1517bbb6

UPSTREAM: Convert CONFIG_DAVINCI_SPI to Kconfig

This converts the following to Kconfig:
CONFIG_DAVINCI_SPI

Signed-off-by: Adam Ford <aford173@gmail.com>
(cherry picked from commit 26410c1517bbb6d6f90de55b5fa65dac3c298bc7)
Change-Id: I7b2166d5ea20dcd0a0e79d6faa1c51fca4d6eef9
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>

show more ...

UPSTREAM: Convert CONFIG_NAND_DAVINCI to Kconfig

This converts the following to Kconfig:
CONFIG_NAND_DAVINCI

Signed-off-by: Adam Ford <aford173@gmail.com>

Change-Id: I3d95031ee5ebaa5e8ac6c03236

UPSTREAM: Convert CONFIG_NAND_DAVINCI to Kconfig

This converts the following to Kconfig:
CONFIG_NAND_DAVINCI

Signed-off-by: Adam Ford <aford173@gmail.com>

Change-Id: I3d95031ee5ebaa5e8ac6c03236622089ccf3caee
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit eba7f1ff6c9836931f0ce2812182190862e38b5f)

show more ...

UPSTREAM: dts: renamed FIT_EMBED to MULTI_DTB_FIT and moved it to the dts Kconfig

CONFIG_FIT_EMBED might be confused with CONFIG_OF_EMBED, rename it
MULTI_DTB_FIT as it is able to get a DTB from a F

UPSTREAM: dts: renamed FIT_EMBED to MULTI_DTB_FIT and moved it to the dts Kconfig

CONFIG_FIT_EMBED might be confused with CONFIG_OF_EMBED, rename it
MULTI_DTB_FIT as it is able to get a DTB from a FIT image containing
multiple DTBs. Also move the option to the Kconfig dedicated to the DTS
options and create a README for this feature.

Change-Id: Ide55c474339db3ccd5e20499c54c8bb41fe3a2c9
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit 11955590a284ecb75892aad5f1174ca1b94a709b)

show more ...

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://git.denx.de/u-boot-net

Move PHYLIB to Kconfig

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig

This converts the following to Kconfig:
CONFIG_ENV_IS_IN_MMC
CONFIG_ENV_IS_IN_NAND
CONFIG_ENV_IS_IN_UBI
CONFIG_ENV_IS_NOWHERE

Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig

This converts the following to Kconfig:
CONFIG_ENV_IS_IN_MMC
CONFIG_ENV_IS_IN_NAND
CONFIG_ENV_IS_IN_UBI
CONFIG_ENV_IS_NOWHERE

In fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.

In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.

There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with

./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

And then manual updates. This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

defconfig: keystone2: Enable U-boot runtime DTB detection

Enable various config options to allow U-boot at runtime to select the
proper dtb to use from the list of dtb's within the FIT image.

Signe

defconfig: keystone2: Enable U-boot runtime DTB detection

Enable various config options to allow U-boot at runtime to select the
proper dtb to use from the list of dtb's within the FIT image.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

configs: Resync defconfigs

Signed-off-by: Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

configs: ks2: Enable TI_COMMON_CMD_OPTIONS

Enable TI_COMMON_CMD_OPTIONS on all keystone2 platforms.
Also sync with savedefconfig.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

configs: Re-sync

Signed-off-by: Tom Rini <trini@konsulko.com>

configs: keystone2: Standardise U-boot prompt

Standardise U-Boot prompt on all keystone2 platforms
instead of platform specific prompt.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by:

configs: keystone2: Standardise U-boot prompt

Standardise U-Boot prompt on all keystone2 platforms
instead of platform specific prompt.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

Kconfig: Adds SYS_TEXT_BASE config option for Keystone2

This patch makes SYS_TEXT_BASE a config option for Keystone2
so that it can be used to load u-boot at different addresses
on secure and non-se

Kconfig: Adds SYS_TEXT_BASE config option for Keystone2

This patch makes SYS_TEXT_BASE a config option for Keystone2
so that it can be used to load u-boot at different addresses
on secure and non-secure Keystone2 devices.

Signed-off-by: Madan Srinivas <madans@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>

show more ...

configs: Re-sync

Signed-off-by: Tom Rini <trini@konsulko.com>

ARM: dts: k2*: Rename the k2* files to keystone-k2* files

As reported in [1], rename the k2* dts files to keystone-* files
this will force consistency throughout.

Script for the same (and hand modi

ARM: dts: k2*: Rename the k2* files to keystone-k2* files

As reported in [1], rename the k2* dts files to keystone-* files
this will force consistency throughout.

Script for the same (and hand modified for Makefile and config
files):
for i in arch/arm/dts/k2*
do
b=`basename $i`;
git mv $i arch/arm/dts/keystone-$b;
sed -i -e "s/$b/keystone-$b/g" arch/arm/dts/*[si]
done

This is similar to linux kernel commit 5edafc29829bc ("ARM: dts: k2*: Rename
the k2* files to keystone-k2* files")

[1] http://marc.info/?l=linux-arm-kernel&m=145637407804754&w=2

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

cmd, disk: convert CONFIG_PARTITION_UUIDS, CMD_PART and CMD_GPT

We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly
update all of the config files we must also update CMD_PA

cmd, disk: convert CONFIG_PARTITION_UUIDS, CMD_PART and CMD_GPT

We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly
update all of the config files we must also update CMD_PART and CMD_GPT to also
be in Kconfig in order to avoid complex logic elsewhere to update all of the
config files.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

disk: convert CONFIG_EFI_PARTITION to Kconfig

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>

disk: convert CONFIG_ISO_PARTITION to Kconfig

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>

Convert CONFIG_BOARD_EARLY_INIT_F to Kconfig

This converts the following to Kconfig:
CONFIG_BOARD_EARLY_INIT_F

Signed-off-by: Simon Glass <sjg@chromium.org>