UPSTREAM: Convert CONFIG_SPI to Kconfig

This converts the following to Kconfig:
CONFIG_SPI

This partly involves updating code that assumes that CONFIG_SPI implies
things that are specific to the

UPSTREAM: Convert CONFIG_SPI to Kconfig

This converts the following to Kconfig:
CONFIG_SPI

This partly involves updating code that assumes that CONFIG_SPI implies
things that are specific to the MPC8xx SPI driver. For now, just update
the CONFIG tests. This also involves reworking the default for
CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
reasonable default, as it does not cause any compile failures.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
(cherry picked from commit f1b1f77060beadbfe9f42a3be00019bd025afbd6)
Change-Id: Ie9f15ada869105eb407f41d4df7eecbaa916b940
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>

show more ...

Merge git://git.denx.de/u-boot-x86

x86: kconfig: Imply CMD_PCI

Let's imply the 'pci' command to access the de facto interconnect
bus in an x86 system.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.d

x86: kconfig: Imply CMD_PCI

Let's imply the 'pci' command to access the de facto interconnect
bus in an x86 system.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>

show more ...

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

common: Move CONFIG_BOOTARGS to Kconfig

Also introduce CONFIG_USE_BOOTARGS option so we can control if
CONFIG_BOOTARGS defined at all.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
[tri

common: Move CONFIG_BOOTARGS to Kconfig

Also introduce CONFIG_USE_BOOTARGS option so we can control if
CONFIG_BOOTARGS defined at all.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
[trini: Resync r8a779[56]_ulcb, various ls10xx targets]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-rockchip

dm: timer: normalise SPL and TPL support

To fully support DM timer in SPL and TPL, we need a few things cleaned
up and normalised:
- inclusion of the uclass and drivers should be an all-or-nothing

dm: timer: normalise SPL and TPL support

To fully support DM timer in SPL and TPL, we need a few things cleaned
up and normalised:
- inclusion of the uclass and drivers should be an all-or-nothing
decision for each stage and under control of $(SPL_TPL_)TIMER
instead of having the two-level configuration with TIMER and
$(SPL_TPL_)TIMER_SUPPORT
- when $(SPL_TPL_)TIMER is enabled, the ARMv8 generic timer code can
not be compiled in

This normalises configuration to $(SPL_TPL_)TIMER and moves the config
options to drivers/timer/Kconfig (and cleans up the collateral damage
to some defconfigs that had SPL_TIMER_SUPPORT enabled).

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Convert CONFIG_CMD_PCI to Kconfig

This converts the following to Kconfig:
CONFIG_CMD_PCI

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Phi

Convert CONFIG_CMD_PCI to Kconfig

This converts the following to Kconfig:
CONFIG_CMD_PCI

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

Merge git://git.denx.de/u-boot-x86

x86: Switch all boards to use DM SCSI

After MMC is converted to DM, convert to use DM SCSI as well for all
x86 boards and imply BLK for both MMC and SCSI drivers.

CONFIG_SCSI_DEV_LIST is no longer

x86: Switch all boards to use DM SCSI

After MMC is converted to DM, convert to use DM SCSI as well for all
x86 boards and imply BLK for both MMC and SCSI drivers.

CONFIG_SCSI_DEV_LIST is no longer used. Clean them up.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

x86: kconfig: Let board select SPI flash

Only a specific type of SPI flash exists on a board, having board
Kconfig to select the SPI flash seems to make more sense. Other
flash types are not necessa

x86: kconfig: Let board select SPI flash

Only a specific type of SPI flash exists on a board, having board
Kconfig to select the SPI flash seems to make more sense. Other
flash types are not necessary except coreboot, which implies all
available flash drivers there.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

x86: ivybridge: kconfig: Imply platform specific drivers

Imply drivers that are working with Ivybridge platform in the
platform Kconfig.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Si

x86: ivybridge: kconfig: Imply platform specific drivers

Imply drivers that are working with Ivybridge platform in the
platform Kconfig.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

x86: kconfig: Imply DM uclass drivers

Now that all x86 boards have been converted to use DM, we can imply
these uclass drivers (DM_ETH, DM_RTC, DM_USB, DM_VIDEO) from the
top level.

Previously DM_G

x86: kconfig: Imply DM uclass drivers

Now that all x86 boards have been converted to use DM, we can imply
these uclass drivers (DM_ETH, DM_RTC, DM_USB, DM_VIDEO) from the
top level.

Previously DM_GPIO, DM_KEYBOARD, DM_SERIAL, DM_SPI, DM_SPI_FLASH
are selected. Change to use 'imply' to allow them to be removed.

Note with this change, chromebook_link64 build fails:

common/built-in.o:(.data.env_htab+0xc): undefined reference to 'env_flags_validate'
lib/built-in.o: In function `hsearch_r':
lib/hashtable.c:380: undefined reference to 'env_callback_init'
lib/hashtable.c:382: undefined reference to 'env_flags_init'
make[1]: *** [spl/u-boot-spl] Error 1

CONFIG_SPL_ENV_SUPPORT is required for chromebook_link64 to build
again. This is just a workaround as it is not needed at all. See
commit bda40d5 "x86: qemu: Add a config for 64-bit U-Boot" for
the same issue seen on QEMU 64-bit target.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

x86: kconfig: Select OF_CONTROL

This is a must have for all x86 boards.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Simon Glas

x86: kconfig: Select OF_CONTROL

This is a must have for all x86 boards.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

x86: kconfig: Imply ENABLE_MRC_CACHE in the platform Kconfig

Platform knows whether MRC cache is implemented, but using it can
be a choice of a specific board.

Signed-off-by: Bin Meng <bmeng.cn@gma

x86: kconfig: Imply ENABLE_MRC_CACHE in the platform Kconfig

Platform knows whether MRC cache is implemented, but using it can
be a choice of a specific board.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

x86: kconfig: Select PCI and DM_PCI

PCI is the de facto interconnect bus in an x86 system.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Revi

x86: kconfig: Select PCI and DM_PCI

PCI is the de facto interconnect bus in an x86 system.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

x86: kconfig: Select USE_PRIVATE_LIBGCC

x86 is using the built-in libgcc implementation and this cannot be
turned off.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <and

x86: kconfig: Select USE_PRIVATE_LIBGCC

x86 is using the built-in libgcc implementation and this cannot be
turned off.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

x86: kconfig: Select TIMER and X86_TSC_TIMER

Without a timer, U-Boot just doesn't boot. This is not something
we can turn off.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevche

x86: kconfig: Select TIMER and X86_TSC_TIMER

Without a timer, U-Boot just doesn't boot. This is not something
we can turn off.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

arch/x86: Select USB before selecting host driver

Kbuild complains if USB is not selected before any of host driver.

warning: (X86) selects USB_EHCI_HCD which has unmet direct dependencies (USB)
wa

arch/x86: Select USB before selecting host driver

Kbuild complains if USB is not selected before any of host driver.

warning: (X86) selects USB_EHCI_HCD which has unmet direct dependencies (USB)
warning: (X86) selects USB_EHCI_HCD which has unmet direct dependencies (USB)

Select it for X86.

Fixes: 64d6ac5bc4a9 ("Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to Kconfig")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[bmeng: Update all x86 boards' defconfig files to remove CONFIG_USB]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

Convert CONFIG_ENV_IS_IN_SPI_FLASH to Kconfig

This converts the following to Kconfig:
CONFIG_ENV_IS_IN_SPI_FLASH

Signed-off-by: Simon Glass <sjg@chromium.org>

Merge git://git.denx.de/u-boot-dm

x86: Move link to use driver model for SCSI

As a demonstration of how to use SCSI with driver model, move link over
to use this. This patch needs more work, but illustrates the concept.

Signed-off-

x86: Move link to use driver model for SCSI

As a demonstration of how to use SCSI with driver model, move link over
to use this. This patch needs more work, but illustrates the concept.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

Convert CONFIG_SCSI to Kconfig

This converts the following to Kconfig:
CONFIG_SCSI

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

configs: Resync defconfigs

Signed-off-by: Tom Rini <trini@konsulko.com>