dm: tpm: Add a 'tpmtest' command

These tests come from Chrome OS code. They are not particularly tidy but can
be useful for checking that the TPM is behaving correctly. Some knowledge of
TPM operati

dm: tpm: Add a 'tpmtest' command

These tests come from Chrome OS code. They are not particularly tidy but can
be useful for checking that the TPM is behaving correctly. Some knowledge of
TPM operation is required to use these.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Christophe Ricard<christophe-h.ricard@st.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

show more ...

tpm: Add a 'tpm info' command

Add a command to display basic information about a TPM such as the model and
open/close state. This can be useful for debugging.

Signed-off-by: Simon Glass <sjg@chromi

tpm: Add a 'tpm info' command

Add a command to display basic information about a TPM such as the model and
open/close state. This can be useful for debugging.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

show more ...

tpm: Check that parse_byte_string() has data to parse

Rather then crashing when there is no data, print an error. The error is
printed by the caller to parse_byte_string().

Acked-by: Christophe Ric

tpm: Check that parse_byte_string() has data to parse

Rather then crashing when there is no data, print an error. The error is
printed by the caller to parse_byte_string().

Acked-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>

show more ...

tpm: Report tpm errors on the command line

When a 'tpm' command fails, we set the return code but give no indication
of failure. This can be confusing.

Add an error message when any tpm command fai

tpm: Report tpm errors on the command line

When a 'tpm' command fails, we set the return code but give no indication
of failure. This can be confusing.

Add an error message when any tpm command fails.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Christophe Ricard<christophe-h.ricard@st.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

show more ...

dm: i2c: Add a command to adjust the offset length

I2C chips can support a register offset, with registers accessible by
sending this offset as the first part of any read or write transaction.
Most

dm: i2c: Add a command to adjust the offset length

I2C chips can support a register offset, with registers accessible by
sending this offset as the first part of any read or write transaction.
Most I2C chips have a single byte offset, thus the offset length is 1.
This provides access for up 256 registers.

However other offset lengths are supported, including 0.

Add a command to provide access to the offset length from the command
line. This allows the offset length to be read or written.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Christophe Ricard<christophe-h.ricard@st.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

show more ...

dm: tpm: Convert the TPM command and library to driver model

Add driver model support to the TPM command and the TPM library. Both
support only a single TPM at present.

Signed-off-by: Simon Glass <

dm: tpm: Convert the TPM command and library to driver model

Add driver model support to the TPM command and the TPM library. Both
support only a single TPM at present.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Christophe Ricard<christophe-h.ricard@st.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

show more ...

tpm: Add Kconfig options for TPMs

Add new Kconfig options for TPMs in preparation for moving boards to use
Kconfig for TPM configuration.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Chr

tpm: Add Kconfig options for TPMs

Add new Kconfig options for TPMs in preparation for moving boards to use
Kconfig for TPM configuration.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Christophe Ricard<christophe-h.ricard@st.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-video

mtd/nand/ubi: assortment of alignment fixes

Various U-Boot adoptions/extensions to MTD/NAND/UBI did not take buffer
alignment into account which led to failures of the following form:

ERROR: v7_dca

mtd/nand/ubi: assortment of alignment fixes

Various U-Boot adoptions/extensions to MTD/NAND/UBI did not take buffer
alignment into account which led to failures of the following form:

ERROR: v7_dcache_inval_range - start address is not aligned - 0x1f7f0108
ERROR: v7_dcache_inval_range - stop address is not aligned - 0x1f7f1108

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Scott Wood <scottwood@freescale.com>
[trini: Add __UBOOT__ hunk to lib/zlib/zutil.c due to malloc.h in common.h]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

env_mmc: Properly prefix mmc errors with '!'

The set_default_env() function from env_common.c expects either
a fully formatted error msg, e.g.: "## Resetting to default environment\n"
or an error ms

env_mmc: Properly prefix mmc errors with '!'

The set_default_env() function from env_common.c expects either
a fully formatted error msg, e.g.: "## Resetting to default environment\n"
or an error msg prefixed with an !, in which case it will format it.

Fix the init_mmc_for_env() error messages to be prefixed with a !
this changes the bootup-log on sunxi when no mmc card is found from:

MMC: SUNXI SD/MMC: 0
No MMC card foundIn: serial
Out: serial

To:

MMC: SUNXI SD/MMC: 0
*** Warning - No MMC card found, using default environment

In: serial
Out: serial

Which clearly is how things should look.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>

show more ...

malloc_simple: Correct the alignment logic in memalign_simple()

This should use the align parameter, not bytes. Natural alignment is one
use case but should not be the only one supported by this fun

malloc_simple: Correct the alignment logic in memalign_simple()

This should use the align parameter, not bytes. Natural alignment is one
use case but should not be the only one supported by this function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

NDS32: Generic Board Support and Unsupport

Add nds32 ag101p generic board support.

Signed-off-by: Kun-Hua Huang <kunhua@andestech.com>

image: Fix loop condition to avoid warning

GCC 5.1 starts warning for comparisons such as !a > 0, assuming that the
negation was meant to apply to the whole expression rather than just the
left oper

image: Fix loop condition to avoid warning

GCC 5.1 starts warning for comparisons such as !a > 0, assuming that the
negation was meant to apply to the whole expression rather than just the
left operand.

Indeed the comparison in the FIT loadable code is confusingly written,
though it does end up doing the right thing. Rewrite the condition to be
more explicit, that is, iterate over strings until they're exhausted.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

x86: fsp: Delay x86_fsp_init() call a little bit

Move x86_fsp_init() call after initf_malloc() so that we can fix up
the gd->malloc_limit later.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-b

x86: fsp: Delay x86_fsp_init() call a little bit

Move x86_fsp_init() call after initf_malloc() so that we can fix up
the gd->malloc_limit later.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

of: clean up OF_CONTROL ifdef conditionals

We have flipped CONFIG_SPL_DISABLE_OF_CONTROL. We have cleansing
devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear
away the ugly logic in

of: clean up OF_CONTROL ifdef conditionals

We have flipped CONFIG_SPL_DISABLE_OF_CONTROL. We have cleansing
devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear
away the ugly logic in include/fdtdec.h:

#ifdef CONFIG_OF_CONTROL
# if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL)
# define OF_CONTROL 0
# else
# define OF_CONTROL 1
# endif
#else
# define OF_CONTROL 0
#endif

Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute. It refers to
CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for
SPL.

Also, we no longer have to cancel CONFIG_OF_CONTROL in
include/config_uncmd_spl.h and scripts/Makefile.spl.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROL

As we discussed a couple of times, negative CONFIG options make our
life difficult; CONFIG_SYS_NO_FLASH, CONFIG_SYS_DCACHE_OFF, ...

of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROL

As we discussed a couple of times, negative CONFIG options make our
life difficult; CONFIG_SYS_NO_FLASH, CONFIG_SYS_DCACHE_OFF, ...
and here is another one.

Now, there are three boards enabling OF_CONTROL on SPL:
- socfpga_arria5_defconfig
- socfpga_cyclone5_defconfig
- socfpga_socrates_defconfig

This commit adds CONFIG_SPL_OF_CONTROL for them and deletes
CONFIG_SPL_DISABLE_OF_CONTROL from the other boards to invert
the logic.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-spi

Revert "Align global_data to a 16-byte boundary"

This causes widespread breakage due to the operation of the low-level code
in crt0.S and cro0_64.S for ARM at least.

The fix is not complicated but

Revert "Align global_data to a 16-byte boundary"

This causes widespread breakage due to the operation of the low-level code
in crt0.S and cro0_64.S for ARM at least.

The fix is not complicated but it seems safer to revert this for now.

This reverts commit 2afddae07523f23f77acd066ad1719f53d289f98.
Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

env: use cache line aligned memory for flash read

Use memalign() with ARCH_DMA_MINALIGN to allocate read buffers.
This is required because, flash drivers may use DMA for read operations
and may have

env: use cache line aligned memory for flash read

Use memalign() with ARCH_DMA_MINALIGN to allocate read buffers.
This is required because, flash drivers may use DMA for read operations
and may have to invalidate the buffer before read.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Tested-by: Jagan Teki <jteki@openedev.com>

show more ...

sf: allocate cache aligned buffers to copy from flash

Use memalign() with ARCH_DMA_MINALIGN to allocate read buffers.
This is required because, flash drivers may use DMA for read operations
and may

sf: allocate cache aligned buffers to copy from flash

Use memalign() with ARCH_DMA_MINALIGN to allocate read buffers.
This is required because, flash drivers may use DMA for read operations
and may have to invalidate the buffer before read.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Tested-by: Jagan Teki <jteki@openedev.com>

show more ...

x86: Switch to using generic global_data setup

There is quite a bit of assembler code that can be removed if we use the
generic global_data setup. Less arch-specific code makes it easier to add
new

x86: Switch to using generic global_data setup

There is quite a bit of assembler code that can be removed if we use the
generic global_data setup. Less arch-specific code makes it easier to add
new features and maintain the start-up code.

Drop the unneeded code and adjust the hooks in board_f.c to cope.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

Allow arch-specific setting of global_data in board_init_f_mem()

At present we have a simple assignment to gd. With some archs this is
implemented as a register or through some other means; a simple

Allow arch-specific setting of global_data in board_init_f_mem()

At present we have a simple assignment to gd. With some archs this is
implemented as a register or through some other means; a simple assignment
does not suit in all cases.

Change this to a function and add documentation to describe how this all
works.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <yorksun@freescale.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

Align global_data to a 16-byte boundary

Some archs like to have larger alignment for their global data. Use 16 bytes
which suits all current archs.

Signed-off-by: Simon Glass <sjg@chromium.org>
Rev

Align global_data to a 16-byte boundary

Some archs like to have larger alignment for their global data. Use 16 bytes
which suits all current archs.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

common: Display >=4GiB memory bank size

bd->bi_dram[] has both start address and size defined as 32-bit,
which is not the case on some platforms where >=4GiB memory bank
is used. Change them to supp

common: Display >=4GiB memory bank size

bd->bi_dram[] has both start address and size defined as 32-bit,
which is not the case on some platforms where >=4GiB memory bank
is used. Change them to support such memory banks.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

image-fdt.c: store returned error value

This fixes the following warning (and the runtime error reporting):
../common/image-fdt.c:491:4: warning: 'fdt_ret' may be used
uninitialized in this function

image-fdt.c: store returned error value

This fixes the following warning (and the runtime error reporting):
../common/image-fdt.c:491:4: warning: 'fdt_ret' may be used
uninitialized in this function [-Wmaybe-uninitialized]

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...