Merge branch 'master' of git://www.denx.de/git/u-boot-imx

Migrate CONFIG_ARCH_USE_MEMSET/MEMCPY with this merge.

Signed-off-by: Tom Rini <trini@konsulko.com>

toradex: allow custom fdt board setup in board file

The config block support currently uses the ft_board_setup function
to patch the device tree with config block information. However, this
does not

toradex: allow custom fdt board setup in board file

The config block support currently uses the ft_board_setup function
to patch the device tree with config block information. However, this
does not allow to patch the device tree with board specific information.
Rename the common setup function to ft_common_board_setup and use the
call it from the board files directly.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

apalis/colibri_imx7/pxa270/t20/t30/vf: integrate config block handling

With our common code in place actually make use of it across all our
modules.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@

apalis/colibri_imx7/pxa270/t20/t30/vf: integrate config block handling

With our common code in place actually make use of it across all our
modules.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>

show more ...

Merge git://git.denx.de/u-boot-dm

dm: tegra: net: Convert tegra boards to driver model for Ethernet

Adjust all Tegra boards to use driver model for Ethernet, now that the
required drivers are converted.

Signed-off-by: Simon Glass <

dm: tegra: net: Convert tegra boards to driver model for Ethernet

Adjust all Tegra boards to use driver model for Ethernet, now that the
required drivers are converted.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...

apalis/colibri_t20/30: clean-up

Various clean-ups either in comments, order or spacing without any
functional impact:
- Add some comments in the device trees resp. reorder some parameters
for cons

apalis/colibri_t20/30: clean-up

Various clean-ups either in comments, order or spacing without any
functional impact:
- Add some comments in the device trees resp. reorder some parameters
for consistency across all our modules.
- Sort some include files alphabetically (while leaving common.h on
top of course).
- Streamline some comments in the configuration files and fix the
spacing from using spaces to tabs.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

apalis/colibri_t20/t30: integrate recovery mode detection

Allow detecting whether or not U-Boot was launched through the
recovery mode of the resp. NVIDIA SoC.

Make use of a board specific arch_mis

apalis/colibri_t20/t30: integrate recovery mode detection

Allow detecting whether or not U-Boot was launched through the
recovery mode of the resp. NVIDIA SoC.

Make use of a board specific arch_misc_init() and enable the same via
CONFIG_ARCH_MISC_INIT configuration option.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

Merge remote-tracking branch 'u-boot/master' into 'u-boot-arm/master'

Merge branch 'master' of git://git.denx.de/u-boot

Merge branch 'master' of git://git.denx.de/u-boot-dm

dm: i2c: Provide an offset length parameter where needed

Rather than assuming that the chip offset length is 1, allow it to be
provided. This allows chips that don't use the default offset length to

dm: i2c: Provide an offset length parameter where needed

Rather than assuming that the chip offset length is 1, allow it to be
provided. This allows chips that don't use the default offset length to
be used (at present they are only supported by the command line 'i2c'
command which sets the offset length explicitly).

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>

show more ...

dm: i2c: Rename driver model I2C functions to permit compatibility

Add a dm_ prefix to driver model I2C functions so that we can keep the old
ones around.

This is a little unfortunate, but on refle

dm: i2c: Rename driver model I2C functions to permit compatibility

Add a dm_ prefix to driver model I2C functions so that we can keep the old
ones around.

This is a little unfortunate, but on reflection it is too difficult to
change the API. We can undo this rename when most boards and drivers are
converted to use driver model for I2C.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge git://git.denx.de/u-boot-dm

dm: i2c: tegra: Convert to driver model

This converts all Tegra boards over to use driver model for I2C. The driver
is adjusted to use driver model and the following obsolete CONFIGs are
removed:

dm: i2c: tegra: Convert to driver model

This converts all Tegra boards over to use driver model for I2C. The driver
is adjusted to use driver model and the following obsolete CONFIGs are
removed:

- CONFIG_SYS_I2C_INIT_BOARD
- CONFIG_I2C_MULTI_BUS
- CONFIG_SYS_MAX_I2C_BUS
- CONFIG_SYS_I2C_SPEED
- CONFIG_SYS_I2C

This has been tested on:
- trimslice (no I2C)
- beaver
- Jetson-TK1

It has not been tested on Tegra 114 as I don't have that board.

Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-tegra

arm: tegra: initial support for apalis t30

This patch adds board support for the Toradex Apalis T30 a computer on
module which can be used on different carrier boards.

For the sake of ease of use w

arm: tegra: initial support for apalis t30

This patch adds board support for the Toradex Apalis T30 a computer on
module which can be used on different carrier boards.

For the sake of ease of use we do not distinguish between different
carrier boards for now as the base module features are deemed
sufficient enough for regular booting.

The following functionality is working so far:
- eMMC boot and environment storage
- Gigabit Ethernet (once Thierry's PCIe as well as my E1000 resp. i210
fixes hit mainline)
- MMC/SD cards (both 8-bit as well as 4-bit slot)
- USB client/host (dual role port as client e.g. for DFU/UMS, other two
ports as host)

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...