| #
b0ec9442 |
| 10-Oct-2017 |
Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> |
UPSTREAM: Drop CONFIG_HAS_DATAFLASH
Last user of this option went away in commit:
fdc7718999 ("board: usb_a9263: Update to support DT and DM")
Change-Id: Id05869deccb88c1102700dd5af58a8c249e3e9e2
UPSTREAM: Drop CONFIG_HAS_DATAFLASH
Last user of this option went away in commit:
fdc7718999 ("board: usb_a9263: Update to support DT and DM")
Change-Id: Id05869deccb88c1102700dd5af58a8c249e3e9e2
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit c68c03f52badc90951dbf8a054c0e500e04bf365)
show more ...
|
| #
289f979c |
| 25-May-2016 |
Heiko Schocher <hs@denx.de> |
corvus DTS / DM support
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
[rebase on current ToT, don't delete gurnard DTB creation]
Signed-off-by: And
corvus DTS / DM support
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
[rebase on current ToT, don't delete gurnard DTB creation]
Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
show more ...
|
| #
20680b56 |
| 20-Feb-2016 |
Tom Rini <trini@konsulko.com> |
Merge branch 'master' of git://git.denx.de/u-boot-atmel
|
| #
8d233521 |
| 02-Feb-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
board: atmel: siemens: clean up UTMI PLL code
Due to introducing the new UTMI PLL clock handle functions,
use the functions to reduce the duplicated code.
Signed-off-by: Wenyou Yang <wenyou.yang@at
board: atmel: siemens: clean up UTMI PLL code
Due to introducing the new UTMI PLL clock handle functions,
use the functions to reduce the duplicated code.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Tested-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
show more ...
|
| #
70341e2e |
| 03-Feb-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
board: atmel: clean up peripheral clock code
Due to introducing the new peripheral clock handle functions,
use these functions to reduce duplicated code.
Signed-off-by: Wenyou Yang <wenyou.yang@atm
board: atmel: clean up peripheral clock code
Due to introducing the new peripheral clock handle functions,
use these functions to reduce duplicated code.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Tested-by: Heiko Schocher <hs@denx.de>
[Rebased on current master, fixup for at91rm9200ek]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
show more ...
|
| #
161b1fe7 |
| 02-Feb-2016 |
Tom Rini <trini@konsulko.com> |
Merge branch 'master' of git://git.denx.de/u-boot-atmel
|
| #
7e8702a0 |
| 01-Feb-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
arm: at91/spl: mpddrc: add struct atmel_mpddrc_config
Add struct atmel_mpddrc_config to accommodate the mpddrc register
configurations, not using the mpddrc register map structure,
struct atmel_mpdd
arm: at91/spl: mpddrc: add struct atmel_mpddrc_config
Add struct atmel_mpddrc_config to accommodate the mpddrc register
configurations, not using the mpddrc register map structure,
struct atmel_mpddrc, in order to increase readability and reduce
run-time memory use.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
show more ...
|
| #
e11793bc |
| 21-Aug-2015 |
Heiko Schocher <hs@denx.de> |
corvus, dfu: add dfu support
add support for DFU on the corvus board.
Signed-off-by: Heiko Schocher <hs@denx.de>
|
| #
fd45a0d1 |
| 21-Aug-2015 |
Heiko Schocher <hs@denx.de> |
at91: corvus: board updates
- rename at91_spl_board_init into spl_board_init
- use SZ_1X defines for sizes
Signed-off-by: Heiko Schocher <hs@denx.de>
|
| #
c982f6b9 |
| 13-Aug-2015 |
Erik van Luijk <evanluijk@interact.nl> |
arm: at91: pmc: replace the constant with a define in at91_pmc.h
To enable the clocks on the at91 boards a constant (0x4) is used.
This is replaced with a define in at91_pmc.h (1 << 2).
Signed-off
arm: at91: pmc: replace the constant with a define in at91_pmc.h
To enable the clocks on the at91 boards a constant (0x4) is used.
This is replaced with a define in at91_pmc.h (1 << 2).
Signed-off-by: Erik van Luijk <evanluijk@interact.nl>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
show more ...
|
| #
6560491f |
| 13-Aug-2015 |
Erik van Luijk <evanluijk@interact.nl> |
arm: at91: at91sam9m10g45ek/corvus remove useless chip select 1 init
On these boards the DDR is connected to a dedicated controller and not
to chip select 1 of the EBI.
Signed-off-by: Erik van Luij
arm: at91: at91sam9m10g45ek/corvus remove useless chip select 1 init
On these boards the DDR is connected to a dedicated controller and not
to chip select 1 of the EBI.
Signed-off-by: Erik van Luijk <evanluijk@interact.nl>
Tested-by: Erik van Luijk <evanluijk@interact.nl>
show more ...
|
| #
0c01c3e8 |
| 13-Aug-2015 |
Erik van Luijk <evanluijk@interact.nl> |
arm: at91: mpddr: allow multiple DDR controllers
The mpddr.c depends on ATMEL_BASE_MPDDRC for the base address to configure the controller.
This cannot be used when there is more than one controller
arm: at91: mpddr: allow multiple DDR controllers
The mpddr.c depends on ATMEL_BASE_MPDDRC for the base address to configure the controller.
This cannot be used when there is more than one controller (i.e. AT91SAM9G45, AT91SAM9M10).
Signed-off-by: Erik van Luijk <evanluijk@interact.nl>
[remove 'new blank line at EOF']
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
show more ...
|
| #
e72d3443 |
| 13-Feb-2015 |
Stefano Babic <sbabic@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot
|
| #
aed03faa |
| 26-Jan-2015 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-atmel
|
| #
a5f8ccae |
| 18-Nov-2014 |
Heiko Schocher <hs@denx.de> |
arm, at91: corvus board updates
- corvus board fix problems with toshiba nand chips
on the corvus board problems with toshiba chips
Manufacturer ID: 0x98 Chip ID: 0xdc encounterd.
Solve this
arm, at91: corvus board updates
- corvus board fix problems with toshiba nand chips
on the corvus board problems with toshiba chips
Manufacturer ID: 0x98 Chip ID: 0xdc encounterd.
Solve this in the following way:
- set other nand timings
- enable CONFIG_SYS_NAND_READY_PIN
- correct the MACH_TYPE setting
Signed-off-by: Heiko Schocher <hs@denx.de>
show more ...
|
| #
5b15fd98 |
| 31-Oct-2014 |
Heiko Schocher <hs@denx.de> |
arm, spl, at91: add spl support for the corvus board
replaces the at91bootstrap code with SPL code.
make the spl image with:
./tools/mkimage -T atmelimage -d spl/u-boot-spl.bin spl/boot.bin
this wr
arm, spl, at91: add spl support for the corvus board
replaces the at91bootstrap code with SPL code.
make the spl image with:
./tools/mkimage -T atmelimage -d spl/u-boot-spl.bin spl/boot.bin
this writes the length of the spl image into the 6th
execption vector. This is needed from the ROM bootloader.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Bo Shen <voice.shen@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
show more ...
|
| #
4b210ad3 |
| 10-Dec-2013 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
board/samsung/trats2/trats2.c
include/configs/exynos5250-dt.h
Signed-off-by: Tom Rini <trini@ti.com>
|
| #
b89ac72a |
| 02-Dec-2013 |
Heiko Schocher <hs@denx.de> |
arm, at91: add siemens corvus board
enable support for the siemens AT91SAM9G20 based board corvus.
Signed-off-by: Boris Schmidt <boris.schmidt@siemens.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
arm, at91: add siemens corvus board
enable support for the siemens AT91SAM9G20 based board corvus.
Signed-off-by: Boris Schmidt <boris.schmidt@siemens.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
show more ...
|