UPSTREAM: libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>Thomas reported U-Boot failed to build host tools if libfdt-develpackage is installed because tools include libfdt header
UPSTREAM: libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>Thomas reported U-Boot failed to build host tools if libfdt-develpackage is installed because tools include libfdt headers from/usr/include/ instead of using internal ones.This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.hand replaces include directives: #include <libfdt.h> -> #include <linux/libfdt.h> #include <libfdt_env.h> -> #include <linux/libfdt_env.h>Change-Id: I6c0f7e50e8b571106627f25ddac008a62bd2994eReported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
show more ...
imx: imx6: Move gpr_init() function to soc.cSince the gpr_init() function is common for boards using MX6S, MX6DL, MX6D,MX6Q and MX6QP processors move it to the soc.c file.Signed-off-by: Breno Li
imx: imx6: Move gpr_init() function to soc.cSince the gpr_init() function is common for boards using MX6S, MX6DL, MX6D,MX6Q and MX6QP processors move it to the soc.c file.Signed-off-by: Breno Lima <breno.lima@nxp.com>Acked-by: Stefano Babic <sbabic@denx.de>Reviewed-by: Lukasz Majewski <lukma@denx.de>Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
imx: reorganize IMX code as other SOCsChange is consistent with other SOCs and it is in preparationfor adding SOMs. SOC's related files are moved from cpu/ tomach-imx/<SOC>.This change is also
imx: reorganize IMX code as other SOCsChange is consistent with other SOCs and it is in preparationfor adding SOMs. SOC's related files are moved from cpu/ tomach-imx/<SOC>.This change is also coherent with the structure in kernel.Signed-off-by: Stefano Babic <sbabic@denx.de>CC: Fabio Estevam <fabio.estevam@nxp.com>CC: Akshay Bhat <akshaybhat@timesys.com>CC: Ken Lin <Ken.Lin@advantech.com.tw>CC: Marek Vasut <marek.vasut@gmail.com>CC: Heiko Schocher <hs@denx.de>CC: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com>CC: Christian Gmeiner <christian.gmeiner@gmail.com>CC: Stefan Roese <sr@denx.de>CC: Patrick Bruenn <p.bruenn@beckhoff.com>CC: Troy Kisky <troy.kisky@boundarydevices.com>CC: Nikita Kiryanov <nikita@compulab.co.il>CC: Otavio Salvador <otavio@ossystems.com.br>CC: "Eric Bénard" <eric@eukrea.com>CC: Jagan Teki <jagan@amarulasolutions.com>CC: Ye Li <ye.li@nxp.com>CC: Peng Fan <peng.fan@nxp.com>CC: Adrian Alonso <adrian.alonso@nxp.com>CC: Alison Wang <b18965@freescale.com>CC: Tim Harvey <tharvey@gateworks.com>CC: Martin Donnelly <martin.donnelly@ge.com>CC: Marcin Niestroj <m.niestroj@grinn-global.com>CC: Lukasz Majewski <lukma@denx.de>CC: Adam Ford <aford173@gmail.com>CC: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr>CC: Boris Brezillon <boris.brezillon@free-electrons.com>CC: Soeren Moch <smoch@web.de>CC: Richard Hu <richard.hu@technexion.com>CC: Wig Cheng <wig.cheng@technexion.com>CC: Vanessa Maegima <vanessa.maegima@nxp.com>CC: Max Krummenacher <max.krummenacher@toradex.com>CC: Stefan Agner <stefan.agner@toradex.com>CC: Markus Niebel <Markus.Niebel@tq-group.com>CC: Breno Lima <breno.lima@nxp.com>CC: Francesco Montefoschi <francesco.montefoschi@udoo.org>CC: Jaehoon Chung <jh80.chung@samsung.com>CC: Scott Wood <oss@buserror.net>CC: Joe Hershberger <joe.hershberger@ni.com>CC: Anatolij Gustschin <agust@denx.de>CC: Simon Glass <sjg@chromium.org>CC: "Andrew F. Davis" <afd@ti.com>CC: "Łukasz Majewski" <l.majewski@samsung.com>CC: Patrice Chotard <patrice.chotard@st.com>CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>CC: Hans de Goede <hdegoede@redhat.com>CC: Masahiro Yamada <yamada.masahiro@socionext.com>CC: Stephen Warren <swarren@nvidia.com>CC: Andre Przywara <andre.przywara@arm.com>CC: "Álvaro Fernández Rojas" <noltari@gmail.com>CC: York Sun <york.sun@nxp.com>CC: Xiaoliang Yang <xiaoliang.yang@nxp.com>CC: Chen-Yu Tsai <wens@csie.org>CC: George McCollister <george.mccollister@gmail.com>CC: Sven Ebenfeld <sven.ebenfeld@gmail.com>CC: Filip Brozovic <fbrozovic@gmail.com>CC: Petr Kulhavy <brain@jikos.cz>CC: Eric Nelson <eric@nelint.com>CC: Bai Ping <ping.bai@nxp.com>CC: Anson Huang <Anson.Huang@nxp.com>CC: Sanchayan Maity <maitysanchayan@gmail.com>CC: Lokesh Vutla <lokeshvutla@ti.com>CC: Patrick Delaunay <patrick.delaunay@st.com>CC: Gary Bisson <gary.bisson@boundarydevices.com>CC: Alexander Graf <agraf@suse.de>CC: u-boot@lists.denx.deReviewed-by: Fabio Estevam <fabio.estevam@nxp.com>Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
pcm058: Fix unused variable warningsThe variable nfc_pads is only referenced when CONFIG_CMD_NAND is set,add a gaurd. The variable gpio_pads is never referenced, drop it. Thevariable usdhc4_pad
pcm058: Fix unused variable warningsThe variable nfc_pads is only referenced when CONFIG_CMD_NAND is set,add a gaurd. The variable gpio_pads is never referenced, drop it. Thevariable usdhc4_pads are only referenced when we do not haveCONFIG_CMD_NAND set and we are not doing an SPL build, modify theexisting guard.Cc: Stefano Babic <sbabic@denx.de>Signed-off-by: Tom Rini <trini@konsulko.com>Reviewed-by: Stefano Babic <sbabic@denx.de>
treewide: replace #include <asm/errno.h> with <linux/errno.h>Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h havethe same content. (both just wrap <asm-generic/errno.h>)Replace
treewide: replace #include <asm/errno.h> with <linux/errno.h>Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h havethe same content. (both just wrap <asm-generic/errno.h>)Replace all include directives for <asm/errno.h> with <linux/errno.h>.Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>[trini: Fixup include/clk.]Signed-off-by: Tom Rini <trini@konsulko.com>
mx6: ddr: Allow changing REFSEL and REFR fieldsCurrently MX6 SPL DDR initialization hardcodes the REF_SEL andREFR fields of the MDREF register as 1 and 7, respectively forDDR3 and 0 and 3 for LPD
mx6: ddr: Allow changing REFSEL and REFR fieldsCurrently MX6 SPL DDR initialization hardcodes the REF_SEL andREFR fields of the MDREF register as 1 and 7, respectively forDDR3 and 0 and 3 for LPDDR2.Looking at the MDREF initialization done via DCD we see thatboards do need to initialize these fields differently:$ git grep 0x021b0020 board/board/bachmann/ot1200/mx6q_4x_mt41j128.cfg:DATA 4 0x021b0020 0x00005800board/ccv/xpress/imximage.cfg:DATA 4 0x021b0020 0x00000800 /* MMDC0_MDREF */board/freescale/mx6qarm2/imximage.cfg:DATA 4 0x021b0020 0x7800board/freescale/mx6qarm2/imximage.cfg:DATA 4 0x021b0020 0x00005800board/freescale/mx6qarm2/imximage_mx6dl.cfg:DATA 4 0x021b0020 0x00005800board/freescale/mx6qarm2/imximage_mx6dl.cfg:DATA 4 0x021b0020 0x00005800board/freescale/mx6qsabreauto/imximage.cfg:DATA 4 0x021b0020 0x00005800board/freescale/mx6qsabreauto/mx6dl.cfg:DATA 4 0x021b0020 0x00005800board/freescale/mx6qsabreauto/mx6qp.cfg:DATA 4 0x021b0020 0x00005800board/freescale/mx6sabresd/mx6dlsabresd.cfg:DATA 4 0x021b0020 0x00005800board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg:DATA 4 0x021b0020 0x00005800board/freescale/mx6slevk/imximage.cfg:DATA 4 0x021b0020 0x00001800board/freescale/mx6sxsabreauto/imximage.cfg:DATA 4 0x021b0020 0x00000800board/freescale/mx6sxsabresd/imximage.cfg:DATA 4 0x021b0020 0x00000800board/warp/imximage.cfg:DATA 4 0x021b0020 0x00001800So introduce a mechanism for users to be able to configureREFSEL and REFR fields as needed.Keep all the mx6 SPL users in their current REF_SEL and REFR values,so no functional changes for the existing users.Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>Reviewed-by: Eric Nelson <eric@nelint.com>
mx6: Add Phytec PCM058 i.MX6 QuadAdd Phytec-i.MX6 SOM with NAND Support: - 1GB RAM - Ethernet - SPI-NOR Flash - NAND (1024 MB) - external SD - UARTSigned-off-by: Stefano Babi
mx6: Add Phytec PCM058 i.MX6 QuadAdd Phytec-i.MX6 SOM with NAND Support: - 1GB RAM - Ethernet - SPI-NOR Flash - NAND (1024 MB) - external SD - UARTSigned-off-by: Stefano Babic <sbabic@denx.de>Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>