Merge branch 'master' of git://www.denx.de/git/u-boot-imx

Drop CONFIG_STACKSIZE from include/configs/imx6_logic.h

Signed-off-by: Tom Rini <trini@konsulko.com>

imx: ventana: add GW5904 support

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
configs/bk4r1_defconfig
configs/colibri_vf_defconfig
configs/pcm052_defconfig
i

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
configs/bk4r1_defconfig
configs/colibri_vf_defconfig
configs/pcm052_defconfig
include/configs/colibri_vf.h
include/configs/pcm052.h

show more ...

imx: ventana: make SD3_VSELECT board specific

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>

imx: ventana: make OTG VBUS power enable board specific

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

imx: ventana: make number of digital I/O's dynamic

Replace the static list of board-specific digital I/O's with a dynamic list.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

imx: ventana: make RS232 enable board specific

Not all Ventana boards have an RS232 transceiver, make it board specific.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

imx: ventana: add fdt fixup to enable UHS-I support on selected boards

UHS-I support is available on Ventana boards with micro-SD sockets depending
on the board revision. For backwards compatibility

imx: ventana: add fdt fixup to enable UHS-I support on selected boards

UHS-I support is available on Ventana boards with micro-SD sockets depending
on the board revision. For backwards compatibility to not break users
who have old bootloaders and newer kernels the device-tree on boards with
microSD disables UHS-I support by default by defining the no-1-8-v property
in the esdhc controller node. For models/revisions that support switchable
1.8V/3.3V I/O which is detectable by the presence of a pull-down on the
SD3_VSELECT pin we remove that property to enable support in the kernel.

Additionally we add SD3_VSELECT to the pinmux for clarity (even though U-Boot
does not currently support UHS-I modes requiring 1.8V I/O).

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: remove dependence on EECONFIG_SATA eeprom feature bit

The MSATA feature is a board-specific feature on Gateworks Ventana boards.

In most cases a 2:1 mux will steer either PCIe or SATA

imx: ventana: remove dependence on EECONFIG_SATA eeprom feature bit

The MSATA feature is a board-specific feature on Gateworks Ventana boards.

In most cases a 2:1 mux will steer either PCIe or SATA to a miniPCIe socket
through an MSATA_EN gpio. In these such cases assign the gpio in the board
specific struct and use its presence to determine if we default the GPIO to
PCIe and if we later steer it according to hwconfig.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

Merge branch 'u-boot/master' into 'u-boot-arm/master'

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

imx: ventana: various board-specific GPIO config updates

- Added iomux for CAN_STBY and RS484_TEN (GW52xx/GW53xx/GW54xx/GW551x)
- Moved iomux of USBHUB_RST# out of board_ehci_hcd_init so that it is

imx: ventana: various board-specific GPIO config updates

- Added iomux for CAN_STBY and RS484_TEN (GW52xx/GW53xx/GW54xx/GW551x)
- Moved iomux of USBHUB_RST# out of board_ehci_hcd_init so that it is
done regardless of USB being initialized in bootloader
- Added usb_sel iomux/hwconfig for GW552x
- Fixed mezzanine DIO for GW54xx
- Fixed PANLEDR# for GW54xx
- Fixed dio iomux/hwconfig for GW552x
- Fixed dio iomux for GW551x
- removed redundant #define

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: detect pmic using i2c probe instead of board model

Avoid requiring board-model and probe pmic by its i2c address.
This is in preparation for being able to call pmic_setup() from SPL
an

imx: ventana: detect pmic using i2c probe instead of board model

Avoid requiring board-model and probe pmic by its i2c address.
This is in preparation for being able to call pmic_setup() from SPL
and not need board type.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...

imx: ventana: split out common functions between SPL and uboot

Move shared functions used by both SPL and U-Boot to common.c:
- setup_iomux_uart() and uart pad config
- gpio pad config

In the pro

imx: ventana: split out common functions between SPL and uboot

Move shared functions used by both SPL and U-Boot to common.c:
- setup_iomux_uart() and uart pad config
- gpio pad config

In the process also moved the following to common.c in preparation for
calling it from the SPL:
- split i2c setup into a shared function
- move pmic init to setup_pmic() function to call directly from
power_init_board()
- split gpio setup into early (iomux and default pin config)
and late (output configuration based on env)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

show more ...