Merge git://git.denx.de/u-boot-x86

x86: kconfig: Select ARCH_EARLY_INIT_R in the platform Kconfig

This is architecture-dependent early initialization hence should
be put in the platform Kconfig.

Signed-off-by: Bin Meng <bmeng.cn@gma

x86: kconfig: Select ARCH_EARLY_INIT_R in the platform Kconfig

This is architecture-dependent early initialization hence should
be put in the platform Kconfig.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-x86

x86: conga-qeval20-qa3: Add SMBus support and SMSC2513 config code

This patch includes the following changes:

- Remove Designware I2C support from dts as its not used
- Configure SMBus PADs in dts

x86: conga-qeval20-qa3: Add SMBus support and SMSC2513 config code

This patch includes the following changes:

- Remove Designware I2C support from dts as its not used
- Configure SMBus PADs in dts
- Enable I2C commands and I2C support
- Configure SMSC2513 USB hub via SMBus upon startup
- Move environment location to match Minnowmax example
- Enhancement of the default environment

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-x86

x86: conga-qeval20-qa3: Add support for internal UART

This patch adds support to enable and use the internal BayTrail UART
instead of the one integrated in the Super IO Winbond chip. For this,
a 2nd

x86: conga-qeval20-qa3: Add support for internal UART

This patch adds support to enable and use the internal BayTrail UART
instead of the one integrated in the Super IO Winbond chip. For this,
a 2nd defconfig file is added.

This is useful for tests done for the congatec SoM used on baseboards
without such a Super IO chip.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

x86: Add congatec conga-QA3/E3845-4G (Bay Trail) support

This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM,
installed on the congatec Qseven 2.0 evaluation carrier board
(conga-Q

x86: Add congatec conga-QA3/E3845-4G (Bay Trail) support

This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM,
installed on the congatec Qseven 2.0 evaluation carrier board
(conga-QEVAL).

Its port is very similar to the MinnowboardMAX port and also uses
the Intel FSP as described in doc/README.x86.

Currently supported are the following interfaces / devices:
- UART (via Winbond legacy SuperIO chip on carrier board)
- Ethernet (PCIe Intel I210 / E1000)
- SPI including SPI NOR as boot-device
- USB 2.0
- SATA via U-Boot SCSI IF
- eMMC
- Video (HDMI output @ 800x600)
- PCIe

Not supported yet is:
- I2C
- USB 3.0

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...