arm: Add explicit include of <asm/mach-types.h>Rather than relying on common.h to provide this include, which is goingaway at some point, include it explicitly in each file.Signed-off-by: Simon
arm: Add explicit include of <asm/mach-types.h>Rather than relying on common.h to provide this include, which is goingaway at some point, include it explicitly in each file.Signed-off-by: Simon Glass <sjg@chromium.org>Reviewed-by: Tom Rini <trini@konsulko.com>
show more ...
board: atmel: clean up peripheral clock codeDue to introducing the new peripheral clock handle functions,use these functions to reduce duplicated code.Signed-off-by: Wenyou Yang <wenyou.yang@atm
board: atmel: clean up peripheral clock codeDue to introducing the new peripheral clock handle functions,use these functions to reduce duplicated code.Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>Tested-by: Heiko Schocher <hs@denx.de>[Rebased on current master, fixup for at91rm9200ek]Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
ARM: at91: move board select menu and common settingsThe board select menu in arch/arm/Kconfig is still big.To slim down it, this commit moves AT91 boards toarch/arm/mach-at91/Kconfig.Also, cons
ARM: at91: move board select menu and common settingsThe board select menu in arch/arm/Kconfig is still big.To slim down it, this commit moves AT91 boards toarch/arm/mach-at91/Kconfig.Also, consolidate "config SYS_SOC" in each board Kconfig.The Kconfig files under board/ directory were modified with thefollowing command: find board -name Kconfig | xargs sed -i -e ' /config SYS_SOC/ { N /default "at91"/ { N d } } 'Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Acked-by: Andreas Bießmann <andreas.devel@googlemail.co>
dm: at91: Add myself as maintainer for snapper9260The old maintainer has left, so take this over.Signed-off-by: Simon Glass <sjg@chromium.org>
dm: at91: Convert snapper9260 to use driver modelConvert this at91sam9260-based board to use driver model. This should serveas an example for other similar boards. Serial and GPIO are supported so
dm: at91: Convert snapper9260 to use driver modelConvert this at91sam9260-based board to use driver model. This should serveas an example for other similar boards. Serial and GPIO are supported sofar.Signed-off-by: Simon Glass <sjg@chromium.org>Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
kconfig: arm: introduce symbol for ARM CPUsThis commit introduces a Kconfig symbol for each ARM CPU:CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136,CPU_ARM1176, CPU_V7, CPU_PXA
kconfig: arm: introduce symbol for ARM CPUsThis commit introduces a Kconfig symbol for each ARM CPU:CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136,CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100.Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selectedfor CPU_ARM1176 and CPU_V7.For each target, the corresponding CPU is selected and the definition ofSYS_CPU in the corresponding Kconfig file is removed.Also, it removes redundant "string" type in some Kconfig files.Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
kconfig: remove redundant "string" type in arch and board KconfigsNow the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}are specified in arch/Kconfig.We can delete the ones in
kconfig: remove redundant "string" type in arch and board KconfigsNow the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}are specified in arch/Kconfig.We can delete the ones in arch and board Kconfig files.This commit can be easily reproduced by the following command:find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '/config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ { N s/\n[[:space:]]*string//}'Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Add board MAINTAINERS filesWe have switched to Kconfig and the boards.cfg file is going tobe removed. We have to retrieve the board status and maintainersinformation from it.The MAINTAINERS for
Add board MAINTAINERS filesWe have switched to Kconfig and the boards.cfg file is going tobe removed. We have to retrieve the board status and maintainersinformation from it.The MAINTAINERS format as in Linux Kernel would be nicebecause we can crib the scripts/get_maintainer.pl script.After some discussion, we chose to put a MAINTAINERS file under eachboard directory, not the top-level one because we want to collectrelevant information for a board into a single place.TODO:Modify get_maintainer.pl to scan multiple MAINTAINERS files.Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Suggested-by: Tom Rini <trini@ti.com>Acked-by: Simon Glass <sjg@chromium.org>
kconfig: add board Kconfig and defconfig filesThis commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
kconfig: add board Kconfig and defconfig filesThis commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board(This commit was automatically generated by a conversion scriptbased on boards.cfg)In Linux Kernel, defconfig files are located underarch/${ARCH}/configs/ directory.It works in Linux Kernel since ARCH is always given from thecommand line for cross compile.But in U-Boot, ARCH is not given from the command line.Which means we cannot know ARCH until the board configuration is done.That is why all the "*_defconfig" files should be gathered into asingle directory ./configs/.Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Acked-by: Simon Glass <sjg@chromium.org>
arm926ejs, at91: add common phy_reset functionadd common phy reset code into a common function.Signed-off-by: Heiko Schocher <hs@denx.de>Cc: Andreas Bießmann <andreas.devel@googlemail.com>Cc: B
arm926ejs, at91: add common phy_reset functionadd common phy reset code into a common function.Signed-off-by: Heiko Schocher <hs@denx.de>Cc: Andreas Bießmann <andreas.devel@googlemail.com>Cc: Bo Shen <voice.shen@atmel.com>Cc: Jens Scharsig <esw@bus-elektronik.de>Cc: Sergey Lapin <slapin@ossfans.org>Cc: Stelian Pop <stelian@popies.net>Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>Cc: Eric Benard <eric@eukrea.com>Cc: Markus Hubig <mhubig@imko.de>Acked-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>Tested-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>Tested-by: Bo Shen <voice.shen@atmel.com>Acked-by: Bo Shen <voice.shen@atmel.com>Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
board: arm: convert makefiles to Kbuild styleSigned-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>Cc: Andreas Bießmann <andreas.devel@googlemail
board: arm: convert makefiles to Kbuild styleSigned-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>Cc: Andreas Bießmann <andreas.devel@googlemail.com>Cc: Stefano Babic <sbabic@denx.de>Cc: Prafulla Wadaskar <prafulla@marvell.com>Cc: Minkyu Kang <mk7.kang@samsung.com>Cc: Vipin Kumar <vipin.kumar@st.com>Cc: Tom Warren <twarren@nvidia.com>Cc: Tom Rini <trini@ti.com>
Merge branch 'master' of git://git.denx.de/u-boot-i2cThe sandburst-specific i2c drivers have been deleted, conflict was justover the SPDX conversion.Conflicts: board/sandburst/common/ppc440gx_i
Merge branch 'master' of git://git.denx.de/u-boot-i2cThe sandburst-specific i2c drivers have been deleted, conflict was justover the SPDX conversion.Conflicts: board/sandburst/common/ppc440gx_i2c.c board/sandburst/common/ppc440gx_i2c.hSigned-off-by: Tom Rini <trini@ti.com>
Add GPL-2.0+ SPDX-License-Identifier to source filesSigned-off-by: Wolfgang Denk <wd@denx.de>[trini: Fixup common/cmd_io.c]Signed-off-by: Tom Rini <trini@ti.com>
i2c, soft-i2c: switch to new multibus/multiadapter support- added to soft_i2c driver new multibus/multiadpater support- adapted all config files, which uses this driverSigned-off-by: Heiko Schoc
i2c, soft-i2c: switch to new multibus/multiadapter support- added to soft_i2c driver new multibus/multiadpater support- adapted all config files, which uses this driverSigned-off-by: Heiko Schocher <hs@denx.de>Cc: Simon Glass <sjg@chromium.org>Cc: Stephen Warren <swarren@wwwdotorg.org>
punt unused clean/distclean targetsThe top level Makefile does not do any recursion into subdirs whencleaning, so these clean/distclean targets in random arch/board dirsnever get used. Punt them
punt unused clean/distclean targetsThe top level Makefile does not do any recursion into subdirs whencleaning, so these clean/distclean targets in random arch/board dirsnever get used. Punt them all.MAKEALL didn't report any errors related to this that I could see.Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Add support for Bluewater Systems Snapper 9260/9G20 modulesAdd support for Bluewater Systems AT91 based Snapper 9260 and 9G20single board computer modules. Includes NAND flash and Ethernetsupport
Add support for Bluewater Systems Snapper 9260/9G20 modulesAdd support for Bluewater Systems AT91 based Snapper 9260 and 9G20single board computer modules. Includes NAND flash and Ethernetsupport.Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>