arm: Add explicit include of <asm/mach-types.h>Rather than relying on common.h to provide this include, which is goingaway at some point, include it explicitly in each file.Signed-off-by: Simon
arm: Add explicit include of <asm/mach-types.h>Rather than relying on common.h to provide this include, which is goingaway at some point, include it explicitly in each file.Signed-off-by: Simon Glass <sjg@chromium.org>Reviewed-by: Tom Rini <trini@konsulko.com>
show more ...
Revert "arm: Remove unregister MACH_TYPE_xxx uses"This reverts commit 70b26cd057f42c7126088b49d4285955c8a00eae.This is not a strict revert as it is easier to fixboard/atmark-techno/armadillo-800
Revert "arm: Remove unregister MACH_TYPE_xxx uses"This reverts commit 70b26cd057f42c7126088b49d4285955c8a00eae.This is not a strict revert as it is easier to fixboard/atmark-techno/armadillo-800eva/armadillo-800eva.c to now thecorrect name (same value) than to revert that change too.Signed-off-by: Tom Rini <trini@konsulko.com>
arm: Remove unregister MACH_TYPE_xxx usesBefore we can sync with the latest mach-types.h file from the LinuxKernel we need to remove some instances of MACH_TYPE_xxx from oursources. As these val
arm: Remove unregister MACH_TYPE_xxx usesBefore we can sync with the latest mach-types.h file from the LinuxKernel we need to remove some instances of MACH_TYPE_xxx from oursources. As these values have been removed from the canonical upstreamsource we should not be using them either, so drop.Cc: Tom Warren <twarren@nvidia.com>Cc: Lucas Stach <dev@lynxeye.de>Cc: Luka Perkov <luka@openwrt.org>Cc: Stephen Warren <swarren@wwwdotorg.org>Cc: Heiko Schocher <hs@denx.de>Cc: Thomas Weber <weber@corscience.de>Cc: Lucile Quirion <lucile.quirion@savoirfairelinux.com>Cc: Matthias Weisser <weisserm@arcor.de>Cc: Suriyan Ramasami <suriyan.r@gmail.com>Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>Cc: Bo Shen <voice.shen@atmel.com>Cc: Nick Thompson <nick.thompson@gefanuc.com>Cc: Stefano Babic <sbabic@denx.de>Cc: Erik van Luijk <evanluijk@interact.nl>Cc: Lokesh Vutla <lokeshvutla@ti.com>Signed-off-by: Tom Rini <trini@konsulko.com>
arm: kirkwood: Change naming of dram functions from km_foo() to mvebu_foo()Additionally the SDRAM address decoding register address is not hard codedin the C code any more. A define is introduced
arm: kirkwood: Change naming of dram functions from km_foo() to mvebu_foo()Additionally the SDRAM address decoding register address is not hard codedin the C code any more. A define is introduced for this base address.This makes is possible to use those gpio functions from other MVEBU SoC'sas well.Signed-off-by: Stefan Roese <sr@denx.de>Tested-by: Luka Perkov <luka@openwrt.org>Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
arm: marvell: Extract kirkwood gpio functions into new common file gpio.cThis makes is possible to use those gpio functions from other MVEBU SoC's as well.Signed-off-by: Stefan Roese <sr@denx.de>
arm: marvell: Extract kirkwood gpio functions into new common file gpio.cThis makes is possible to use those gpio functions from other MVEBU SoC's as well.Signed-off-by: Stefan Roese <sr@denx.de>Tested-by: Luka Perkov <luka@openwrt.org>Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
arm: marvell: Move arch/kirkwood.h to arch/soc.hThis move makes is possible to use this header not only from kirkwoodplatforms but from all Marvell mvebu platforms.Signed-off-by: Stefan Roese <s
arm: marvell: Move arch/kirkwood.h to arch/soc.hThis move makes is possible to use this header not only from kirkwoodplatforms but from all Marvell mvebu platforms.Signed-off-by: Stefan Roese <sr@denx.de>Tested-by: Luka Perkov <luka@openwrt.org>Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
kconfig: remove redundant "string" type in arch and board KconfigsNow the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}are specified in arch/Kconfig.We can delete the ones in
kconfig: remove redundant "string" type in arch and board KconfigsNow the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}are specified in arch/Kconfig.We can delete the ones in arch and board Kconfig files.This commit can be easily reproduced by the following command:find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '/config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ { N s/\n[[:space:]]*string//}'Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
kirkwood: kconfig: refactor Kconfig and defconfigBecuase the board select menu in arch/arm/Kconfig is too big,move the KirkWood board select menu to kirkwood/Kconfig.Consolidate also common sett
kirkwood: kconfig: refactor Kconfig and defconfigBecuase the board select menu in arch/arm/Kconfig is too big,move the KirkWood board select menu to kirkwood/Kconfig.Consolidate also common settings (CONFIG_SYS_CPU="arm926ejs" andCONFIG_SYS_SOC="kirkwood").Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Acked-by: Prafulla Wadasdkar <prafulla@marvell.com>Cc: Luka Perkov <luka@openwrt.org>
Add board MAINTAINERS filesWe have switched to Kconfig and the boards.cfg file is going tobe removed. We have to retrieve the board status and maintainersinformation from it.The MAINTAINERS for
Add board MAINTAINERS filesWe have switched to Kconfig and the boards.cfg file is going tobe removed. We have to retrieve the board status and maintainersinformation from it.The MAINTAINERS format as in Linux Kernel would be nicebecause we can crib the scripts/get_maintainer.pl script.After some discussion, we chose to put a MAINTAINERS file under eachboard directory, not the top-level one because we want to collectrelevant information for a board into a single place.TODO:Modify get_maintainer.pl to scan multiple MAINTAINERS files.Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Suggested-by: Tom Rini <trini@ti.com>Acked-by: Simon Glass <sjg@chromium.org>
kconfig: add board Kconfig and defconfig filesThis commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
kconfig: add board Kconfig and defconfig filesThis commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board(This commit was automatically generated by a conversion scriptbased on boards.cfg)In Linux Kernel, defconfig files are located underarch/${ARCH}/configs/ directory.It works in Linux Kernel since ARCH is always given from thecommand line for cross compile.But in U-Boot, ARCH is not given from the command line.Which means we cannot know ARCH until the board configuration is done.That is why all the "*_defconfig" files should be gathered into asingle directory ./configs/.Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Acked-by: Simon Glass <sjg@chromium.org>
board: arm: convert makefiles to Kbuild styleSigned-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>Cc: Andreas Bießmann <andreas.devel@googlemail
board: arm: convert makefiles to Kbuild styleSigned-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>Cc: Andreas Bießmann <andreas.devel@googlemail.com>Cc: Stefano Babic <sbabic@denx.de>Cc: Prafulla Wadaskar <prafulla@marvell.com>Cc: Minkyu Kang <mk7.kang@samsung.com>Cc: Vipin Kumar <vipin.kumar@st.com>Cc: Tom Warren <twarren@nvidia.com>Cc: Tom Rini <trini@ti.com>
Add GPL-2.0+ SPDX-License-Identifier to source filesSigned-off-by: Wolfgang Denk <wd@denx.de>[trini: Fixup common/cmd_io.c]Signed-off-by: Tom Rini <trini@ti.com>
ARM: Add Seagate GoFlex Home supportAdd Seagate GoFlex Home supportStart with dockstar configurationdefine support for RTC, DATE, SATA and EXT4FSSigned-off-by: Suriyan Ramasami <suriyan.r@gmai
ARM: Add Seagate GoFlex Home supportAdd Seagate GoFlex Home supportStart with dockstar configurationdefine support for RTC, DATE, SATA and EXT4FSSigned-off-by: Suriyan Ramasami <suriyan.r@gmail.com>