Merge git://www.denx.de/git/u-boot-marvell

driver/ddr: Add support for setting timing in hws_topology_map

The DDR3 training code for Marvell A38X currently computes 1t timing
when given board topology map of the Turris Omnia, but Omnia needs

driver/ddr: Add support for setting timing in hws_topology_map

The DDR3 training code for Marvell A38X currently computes 1t timing
when given board topology map of the Turris Omnia, but Omnia needs 2t.

This patch adds support for enforcing the 2t timing in struct
hws_topology_map, through a new enum hws_timing, which can assume
following values:
HWS_TIM_DEFAULT - default behaviour, compute whether to enable 2t
from the number of CSs
HWS_TIM_1T - enforce 1t
HWS_TIM_2T - enforce 2t

This patch also sets all the board topology maps (db-88f6820-amc,
db-88f6820-gp, controlcenterdc and clearfog) to have timing set to
HWS_TIM_DEFAULT.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>

show more ...

Merge git://git.denx.de/u-boot-marvell

arm: mvebu: a38x: serdes specification cleanup

Instead of allocating space in the driver for the serdes
specification table, just allow the board file to set a pointer
to it. Also, allow the board

arm: mvebu: a38x: serdes specification cleanup

Instead of allocating space in the driver for the serdes
specification table, just allow the board file to set a pointer
to it. Also, allow the board to only specify the lanes that are
used instead of including unused lanes.

Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Acked-by: Stefan Roese <sr@denx.de>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>

show more ...

arm: mvebu: a38x: Remove unsupported topologies

A lot of extra configuration information was left over in the
Marvell serdes and DDR3 initialization code for boards that
U-boot does not support. Re

arm: mvebu: a38x: Remove unsupported topologies

A lot of extra configuration information was left over in the
Marvell serdes and DDR3 initialization code for boards that
U-boot does not support. Remove this extra config information,
and the concept of fixing up board topologies with information
loaded from an EEPROM. If this needs to be done, it should be
handled in the board file, not in core code.

Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Acked-by: Stefan Roese <sr@denx.de>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>

show more ...

Merge git://git.denx.de/u-boot-marvell

arm: mvebu: db-88f6820-gp: Enable PCI support

This patch enabled the MVEBU PCIe support on the db-88f6820-gp A38x
eval board. It also enabled the Intel E1000 driver support and
adds the initializati

arm: mvebu: db-88f6820-gp: Enable PCI support

This patch enabled the MVEBU PCIe support on the db-88f6820-gp A38x
eval board. It also enabled the Intel E1000 driver support and
adds the initialization of PCIe network controllers to the
board code.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Anton Schubert <anton.schubert@gmx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <eibach@gdsys.de>

show more ...

arm: mvebu: Enable NAND controller on MVEBU SoC's

This patch enables the NAND controller on the Armada XP/38x and provides
a new function that returns the NAND controller input clock. This
function

arm: mvebu: Enable NAND controller on MVEBU SoC's

This patch enables the NAND controller on the Armada XP/38x and provides
a new function that returns the NAND controller input clock. This
function will be used by the MVEBU NAND driver.

As part of this patch, the multiple BIT macro definitions are moved
to a common place in soc.h.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Peter Morrow <peter@senient.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>

show more ...

Merge git://git.denx.de/u-boot-marvell

arm: mvebu: db-88f6820: Add SPL support with DDR init code

This patch adds SPL support for the Marvell DB-88F6820-GP board.
With this change, the bin_hdr from the original Marvell U-boot
is not need

arm: mvebu: db-88f6820: Add SPL support with DDR init code

This patch adds SPL support for the Marvell DB-88F6820-GP board.
With this change, the bin_hdr from the original Marvell U-boot
is not needed any more on this board. The sources from bin_hdr
(SERDES/PHY and DDR setup) are now integrated in mainline
U-Boot. And this patch enables them for this board.

Signed-off-by: Stefan Roese <sr@denx.de>

show more ...

Merge git://git.denx.de/u-boot-marvell

arm: mvebu: Add Armada A38x DB-88F6820-GP board support

This patch adds support for the Marvell DB-88F6820-GP Armada A38x
evaluation board.

Supported peripherals are:
- UART
- Ethernet (mvneta)
- I

arm: mvebu: Add Armada A38x DB-88F6820-GP board support

This patch adds support for the Marvell DB-88F6820-GP Armada A38x
evaluation board.

Supported peripherals are:
- UART
- Ethernet (mvneta)
- I2C
- SPI (including SPI NOR flash)

Please note that this board support right now only supports the
main U-Boot. Without the bin_hdr integration (DDR training etc). This
will be added in a few days / weeks to complete this board port. But
till then this U-Boot version can be run on the target via the
original Marvell U-Boot via this command:

tftpboot 4000000 db-88f6820-gp/u-boot.bin;go 4000000

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>

show more ...