x86: Add a simple superio driver for SMSC LPC47M

On most x86 boards, the legacy serial ports (io address 0x3f8/0x2f8)
are provided by a superio chip connected to the LPC bus. We must
program the sup

x86: Add a simple superio driver for SMSC LPC47M

On most x86 boards, the legacy serial ports (io address 0x3f8/0x2f8)
are provided by a superio chip connected to the LPC bus. We must
program the superio chip so that serial ports are available for us.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

x86: ich6-gpio: Move setup_pch_gpios() to board support codes

Movie setup_pch_gpios() in the ich6-gpio driver to the board support
codes, so that the driver does not need to know any platform specif

x86: ich6-gpio: Move setup_pch_gpios() to board support codes

Movie setup_pch_gpios() in the ich6-gpio driver to the board support
codes, so that the driver does not need to know any platform specific
stuff (ie: include the platform specifc chipset header file).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

Replace <compiler.h> with <linux/compiler.h>

Including <linux/compiler.h> is enough for general use.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

x86: Add initial video device init for Intel GMA

Intel's Graphics Media Accelerator (GMA) is a generic name for a wide range
of video devices. Add code to set up the hardware on ivybridge. Part of t

x86: Add initial video device init for Intel GMA

Intel's Graphics Media Accelerator (GMA) is a generic name for a wide range
of video devices. Add code to set up the hardware on ivybridge. Part of the
init happens in native code, part of it happens in a 16-bit option ROM for
those nostalgic for the 1970s.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

x86: Add GDT descriptors for option ROMs

Option ROMs require a few additional descriptors. Add these, and remove the
enum since we now have to access several descriptors from assembler.

Signed-off-

x86: Add GDT descriptors for option ROMs

Option ROMs require a few additional descriptors. Add these, and remove the
enum since we now have to access several descriptors from assembler.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

x86: ivybridge: Add northbridge init functions

Add init for the northbridge, another part of the platform controller hub.

Signed-off-by: Simon Glass <sjg@chromium.org>

x86: Drop some msr functions that we don't support

These are not available in U-Boot as yet, so drop them.

Signed-off-by: Simon Glass <sjg@chromium.org>

x86: Add init for model 206AX CPU

Add the setup code for the CPU so that it can be used at full speed.

Signed-off-by: Simon Glass <sjg@chromium.org>

x86: Add LAPIC setup code

Add code to set up the Local Advanced Peripheral Interrupt Controller.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

x86: Refactor interrupt_init()

Rename interrupt_init() in arch/x86/lib/pcat_interrupts.c to
i8259_init() and create a new interrupt_init() in
arch/x86/cpu/interrupt.c to call i8259_init() followed b

x86: Refactor interrupt_init()

Rename interrupt_init() in arch/x86/lib/pcat_interrupts.c to
i8259_init() and create a new interrupt_init() in
arch/x86/cpu/interrupt.c to call i8259_init() followed by a
call to cpu_init_interrupts().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>

show more ...

x86: Remove cpu_init_r() for x86

Since cpu_init_interrupts() was moved out of cpu_init_r(), it is
useless to keep cpu_init_r() for x86, thus remove it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

x86: Remove cpu_init_r() for x86

Since cpu_init_interrupts() was moved out of cpu_init_r(), it is
useless to keep cpu_init_r() for x86, thus remove it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>

show more ...

x86: Add Intel speedstep and turbo mode code

Intel chips have a turbo mode where they can run faster for a short period
until they reach thermal limits. Add code to adjust and query this feature.

S

x86: Add Intel speedstep and turbo mode code

Intel chips have a turbo mode where they can run faster for a short period
until they reach thermal limits. Add code to adjust and query this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

x86: ivybridge: Set up XHCI USB

Add init for XHCI so that high-speed USB can be used.

Signed-off-by: Simon Glass <sjg@chromium.org>

x86: ivybridge: Set up EHCI USB

Add init for EHCI so that USB can be used.

Signed-off-by: Simon Glass <sjg@chromium.org>

x86: ivybridge: Add SATA init

Add code to set up the SATA interfaces on boot.

Signed-off-by: Simon Glass <sjg@chromium.org>

x86: ivybridge: Add PCH init

Add required init for the Intel Platform Controller Hub in ivybridge.

Signed-off-by: Simon Glass <sjg@chromium.org>

x86: Add a simple header file for ACPI

We don't use many features yet, so this only has a few declarations.
It will be expanded as needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

x86: ivybridge: Add support for BD82x6x PCH

Add basic setup for the PCH.

Signed-off-by: Simon Glass <sjg@chromium.org>

x86: Set up edge triggering on interrupt 9

Add this additional init in case it is needed by the OS.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

x86: pci: Add handlers before and after a PCI hose scan

Some boards will want to do some setup before and after a PCI hose
is scanned.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin

x86: pci: Add handlers before and after a PCI hose scan

Some boards will want to do some setup before and after a PCI hose
is scanned.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: Add ioapic.h header

Add definitions for the I/O Advanced Peripheral Interrupt Controller.

Signed-off-by: Simon Glass <sjg@chromium.org>

x86: ivybridge: Implement SDRAM init

Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in
the board directory and the SDRAM SPD information in the device tree. This
also needs

x86: ivybridge: Implement SDRAM init

Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in
the board directory and the SDRAM SPD information in the device tree. This
also needs the Intel Management Engine (me.bin) to work. Binary blobs
everywhere: so far we have MRC, ME and microcode.

SDRAM init works by setting up various parameters and calling the MRC. This
in turn does some sort of magic to work out how much memory there is and
the timing parameters to use. It also sets up the DRAM controllers. When
the MRC returns, we use the information it provides to map out the
available memory in U-Boot.

U-Boot normally moves itself to the top of RAM. On x86 the RAM is not
generally contiguous, and anyway some RAM may be above 4GB which doesn't
work in 32-bit mode. So we relocate to the top of the largest block of
RAM we can find below 4GB. Memory above 4GB is accessible with special
functions (see physmem).

It would be possible to build U-Boot in 64-bit mode but this wouldn't
necessarily provide any more memory, since the largest block is often below
4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large
ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit
kernels directly so this does not pose a limitation in that area. Also there
are probably parts of U-Boot that will not work correctly in 64-bit mode.
The MRC is one.

There is some work remaining in this area. Since memory init is very slow
(over 500ms) it is possible to save the parameters in SPI flash to speed it
up next time. Suspend/resume support is not fully implemented, or at least
it is not efficient.

With this patch, link boots to a prompt.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

x86: ivybridge: Add LAPIC support

The local advanced programmable interrupt controller is not used much in
U-Boot but we do need to set it up. Add basic support for this, which will
be extended as n

x86: ivybridge: Add LAPIC support

The local advanced programmable interrupt controller is not used much in
U-Boot but we do need to set it up. Add basic support for this, which will
be extended as needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

x86: ivybridge: Add support for early GPIO init

When not relying on Coreboot for GPIO init the GPIOs must be set up
correctly. This is currently done statically through a rather ugly method.
As the

x86: ivybridge: Add support for early GPIO init

When not relying on Coreboot for GPIO init the GPIOs must be set up
correctly. This is currently done statically through a rather ugly method.
As the GPIOs are figured out they can be moved to the device tree and set
up as needed rather than all at the start.

In this implementation, board files should call ich_gpio_set_gpio_map()
before the GPIO driver is used in order to provide the GPIO information.
We use the early PCI interface so that this driver can now be used before
relocation.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

x86: ivybridge: Add early init for PCH devices

Many PCH devices are hard-coded to a particular PCI address. Set these
up early in case they are needed.

Signed-off-by: Simon Glass <sjg@chromium.org>