Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

Merge branch 'master' of git://git.denx.de/u-boot-x86

x86: dts: Update to include ACTL register details

This updates all x86 boards that currently have IRQ router in the
dts files to include ACTL register details.

Signed-off-by: Bin Meng <bmeng.cn@gma

x86: dts: Update to include ACTL register details

This updates all x86 boards that currently have IRQ router in the
dts files to include ACTL register details.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

x86: ich6_gpio: Convert to use proper DM API

At present this GPIO driver still uses the legacy PCI API. Now that
we have proper PCH drivers we can use those to obtain the information
we need. While

x86: ich6_gpio: Convert to use proper DM API

At present this GPIO driver still uses the legacy PCI API. Now that
we have proper PCH drivers we can use those to obtain the information
we need. While the device tree has nodes for the GPIO peripheral it is
not in the right place. It should be on the PCI bus as a sub-peripheral
of the PCH device.

Update the device tree files to show the GPIO controller within the PCH,
so that PCI access works as expected. This also adds '#address-cells'
and '#size-cells' to the PCH node.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>

show more ...

spi: ich: Use compatible strings to distinguish controller version

At present ich spi driver gets the controller version information via
pch, but this can be simply retrieved via spi node's compatib

spi: ich: Use compatible strings to distinguish controller version

At present ich spi driver gets the controller version information via
pch, but this can be simply retrieved via spi node's compatible string.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Tested-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-x86

x86: Correct spi node alias

With recent changes spi node was moved to a place as a subnode under
pch, so update the alias to refer to its correct place as well.

Signed-off-by: Bin Meng <bmeng.cn@gm

x86: Correct spi node alias

With recent changes spi node was moved to a place as a subnode under
pch, so update the alias to refer to its correct place as well.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

dm: x86: queensbay: Add an interrupt driver

Add a driver for interrupts on queensbay and move the code currently in
cpu_irq_init() into its probe() method.

Signed-off-by: Simon Glass <sjg@chromium.

dm: x86: queensbay: Add an interrupt driver

Add a driver for interrupts on queensbay and move the code currently in
cpu_irq_init() into its probe() method.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

dm: x86: spi: Convert ICH SPI driver to driver model PCI API

At present this SPI driver works by searching the PCI buses for its
peripheral. It also uses the legacy PCI API.

In addition the driver

dm: x86: spi: Convert ICH SPI driver to driver model PCI API

At present this SPI driver works by searching the PCI buses for its
peripheral. It also uses the legacy PCI API.

In addition the driver has code to determine the type of Intel PCH that is
used (version 7 or version 9). Now that we have proper PCH drivers we can
use those to obtain the information we need.

While the device tree has a node for the SPI peripheral it is not in the
right place. It should be on the PCI bus as a sub-peripheral of the LPC
device.

Update the device tree files to show the SPI controller within the PCH, so
that PCI access works as expected.

This patch includes Bin's fix-up patch from here:

https://patchwork.ozlabs.org/patch/569478/

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: Fix PCI UART compatible string for crownbay and galileo

With recent ns16550 driver changes, we only changed the legacy UART
(at I/O port 0x3f8) compatible string, but forgot to change the PCI
U

x86: Fix PCI UART compatible string for crownbay and galileo

With recent ns16550 driver changes, we only changed the legacy UART
(at I/O port 0x3f8) compatible string, but forgot to change the PCI
UART compatible string. Now fix it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

x86: Convert to use driver model timer

Convert all x86 boards to use driver model tsc timer.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

x86: crownbay: Convert to use driver model keyboard

Convert to use driver model keyboard on Intel Crown Bay.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

Merge git://git.denx.de/u-boot-x86

x86: crownbay: Support Topcliff integrated pci uart devices with driver model

In order to make a pci uart device node to be properly bound to its
driver, we need make sure its parent node has a comp

x86: crownbay: Support Topcliff integrated pci uart devices with driver model

In order to make a pci uart device node to be properly bound to its
driver, we need make sure its parent node has a compatible string
which matches a driver that scans all of its child device nodes in
the device tree.

Change all pci bridge nodes under root pci node to use "pci-bridge"
compatible driver, as well as corresponding <reg> properties to
indicate its devfn. At last, adding "u-boot,dm-pre-reloc" to each
of these nodes for driver model to initialize them before relocation.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

x86: crownbay: Enable on-board SMSC superio keyboard controller

So far we only enabled one legacy serial port on the SMSC LPC47m
superio chipset on Intel Crown Bay board. As the board also has
dual

x86: crownbay: Enable on-board SMSC superio keyboard controller

So far we only enabled one legacy serial port on the SMSC LPC47m
superio chipset on Intel Crown Bay board. As the board also has
dual PS/2 ports routed out, enable the keyboard controller which
is i8042 compatible so that we can use PS/2 keyboard and mouse.

In order to make PS/2 keyboard work with the VGA console, remove
CONFIG_VGA_AS_SINGLE_DEVICE. To boot Linux kernel with PIC mode
using PIRQ routing table, adjust the mask in the device tree to
reserve irq12 which is used by PS/2 mouse.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

x86: Convert to use driver model pci on queensbay/crownbay

Move to driver model pci for Intel queensbay/crownbay.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

Merge branch 'master' of git://git.denx.de/u-boot

Merge git://git.denx.de/u-boot-x86

x86: queensbay: Change PCIe root ports' interrupt routing

So far interrupt routing works pretty well for any on-chip devices
on Intel Crown Bay. When inserting any PCIe card to any PCIe slot,
Linux

x86: queensbay: Change PCIe root ports' interrupt routing

So far interrupt routing works pretty well for any on-chip devices
on Intel Crown Bay. When inserting any PCIe card to any PCIe slot,
Linux kernel is smart enough to do interrupt swizzling and figure
out device's irq using its parent bridge's interrupt routing info
all the way up to its root port. In U-Boot all PCIe root ports'
interrupts were routed to PIRQ E/F/G/H before, while actually all
PCIe downstream ports received INTx are routed to PIRQ A/B/C/D
directly and not configurable. Now we change this mapping so that
any external PCIe device can work correctly.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

x86: queensbay: Correct Topcliff device irqs

There are 4 usb ports on the Intel Crown Bay board, 2 of which are
connected to Topcliff usb host 0 and the other 2 connected to usb
host 1. USB devices

x86: queensbay: Correct Topcliff device irqs

There are 4 usb ports on the Intel Crown Bay board, 2 of which are
connected to Topcliff usb host 0 and the other 2 connected to usb
host 1. USB devices inserted in the ports connected to usb host 1
cannot get detected due to wrong IRQ assigned to the controller.
Actually we need apply the PCI interrupt pin swizzling logic to all
devices on the Topcliff chipset when configuring the PIRQ routing.

This was observed on usb ports, but device 6 and 10 irqs are also
wrong. Correct them all together.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

x86: crownbay: Enable DM RTC support

Add a RTC node in the device tree to enable DM RTC support.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

x86: crownbay: Add MP initialization

Intel Crown Bay board has a TunnelCreek processor which supports
hyper-threading. Add /cpus node in the crownbay.dts and enable
the MP initialization.

Signed-of

x86: crownbay: Add MP initialization

Intel Crown Bay board has a TunnelCreek processor which supports
hyper-threading. Add /cpus node in the crownbay.dts and enable
the MP initialization.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
(modified to remove error:
overriding the value of OF_CONTROL. Old value: "y", new value: "y")

show more ...

Merge branch 'u-boot/master' into 'u-boot-arm/master'

x86: Refactor PIRQ routing support

PIRQ routing is pretty much common in Intel chipset. It has several
PIRQ links (normally 8) and corresponding registers (either in PCI
configuration space or memor

x86: Refactor PIRQ routing support

PIRQ routing is pretty much common in Intel chipset. It has several
PIRQ links (normally 8) and corresponding registers (either in PCI
configuration space or memory-mapped IBASE) to configure the legacy
8259 IRQ vector mapping. Refactor current Queensbay PIRQ routing
support using device tree and move it to a common place, so that we
can easily add PIRQ routing support on a new platform.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

x86: Add alias for SPI node in the board dts

Since Intel ICH SPI driver has been converted to driver model, we need
add an alias for SPI node in the board dts files otherwise SPI flash
won't be dete

x86: Add alias for SPI node in the board dts

Since Intel ICH SPI driver has been converted to driver model, we need
add an alias for SPI node in the board dts files otherwise SPI flash
won't be detected due to 'invalid bus' error.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...