sandbox: use CONFIG_VAL(SYS_MALLOC_F_LEN) to distinguish malloc pool size before relocation

SPL and normal u-boot stage use different malloc pool size
configuration before relocation, so use CONFIG_

sandbox: use CONFIG_VAL(SYS_MALLOC_F_LEN) to distinguish malloc pool size before relocation

SPL and normal u-boot stage use different malloc pool size
configuration before relocation, so use CONFIG_VAL(SYS_MALLOC_F_LEN)
to fit different boot stage.

Signed-off-by: Andy Yan <andyshrk@gmail.com>

Changes in v3:
- use CONFIG_VAL(), which suggested by Simon

Changes in v2: None

arch/sandbox/cpu/start.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

board_f: sandbox: Move sandbox_early_getopt_check() into misc_init_f()

We don't need a special hook for sandbox as one of the later ones will do
just as well. We can print error messages about bad o

board_f: sandbox: Move sandbox_early_getopt_check() into misc_init_f()

We don't need a special hook for sandbox as one of the later ones will do
just as well. We can print error messages about bad options after we
print the banner. In fact, it seems better.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>

show more ...

board_f: sandbox: Move setup_ram_buf() to private code

There is no need to have this call in the generic init sequence and no
other architecture has needed it in the time it has been there. Move it

board_f: sandbox: Move setup_ram_buf() to private code

There is no need to have this call in the generic init sequence and no
other architecture has needed it in the time it has been there. Move it
into sandbox's private code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>

show more ...

Merge git://git.denx.de/u-boot-dm

sandbox: Don't include the main loop in SPL

SPL does not have a command interface so we should not include the main loop
code.

Signed-off-by: Simon Glass <sjg@chromium.org>

sandbox: Avoid calling commands when not available

Don't try to run commands when not supported.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

test: Record and silence console in tests

When running sandbox tests, silence the console to avoid unwanted output.
Also, record the console in case tests want to check it.

The -v option can be use

test: Record and silence console in tests

When running sandbox tests, silence the console to avoid unwanted output.
Also, record the console in case tests want to check it.

The -v option can be used to enable stdout during tests.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

sandbox: Add missing errno.h includes in a few files

These files use error numbering, so add the include.

Signed-off-by: Simon Glass <sjg@chromium.org>

Merge git://git.denx.de/u-boot-dm

sandbox: Don't try distro_bootcmd by default

For the distro_bootcmds to succeed on the sandbox a bit of setup is
required (e.g. network configured or host image bound), so running them
by default is

sandbox: Don't try distro_bootcmd by default

For the distro_bootcmds to succeed on the sandbox a bit of setup is
required (e.g. network configured or host image bound), so running them
by default isn't that useful.

Add a -b/--boot command to the sandbox binary, which triggers the
distro_bootcmds to run after the other command-line commands.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Merge remote-tracking branch 'u-boot/master' into 'u-boot-arm/master'

Merge branch 'sandbox' of git://git.denx.de/u-boot-x86

sandbox: Return '-c command' exit value as sandbox exit code

When a command is passed into sandbox using the '-c' argument the
command is run directly. This is most helpful when running tests (such

sandbox: Return '-c command' exit value as sandbox exit code

When a command is passed into sandbox using the '-c' argument the
command is run directly. This is most helpful when running tests (such
as test-dm.sh). Previously the exit code was an unused enum. Change it
to be the actual return code from the command so that the script calling
sandbox can know if the command succeeded (tests passed). Also remove
the now completely unused "exit_state" in sandbox.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Merge branch 'patman' of git://git.denx.de/u-boot-x86

sandbox: Add a -D option to use a default device tree

It is painful to specify the full path to the device tree with the -d
option. It is normally kept in the same directory as U-Boot, so provide
an

sandbox: Add a -D option to use a default device tree

It is painful to specify the full path to the device tree with the -d
option. It is normally kept in the same directory as U-Boot, so provide
an option to use this by default.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'sandbox' of git://git.denx.de/u-boot-x86

sandbox: Fix warnings in cpu.c and os.c

This fixes the following two problems:

cppcheck reports:
[arch/sandbox/cpu/start.c:132]: (error) Uninitialized variable: err
[arch/sandbox/cpu/os.c:371]: (er

sandbox: Fix warnings in cpu.c and os.c

This fixes the following two problems:

cppcheck reports:
[arch/sandbox/cpu/start.c:132]: (error) Uninitialized variable: err
[arch/sandbox/cpu/os.c:371]: (error) Memory leak: fname

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Wolfgang Denk <wd@denx.de>

show more ...

linux/kernel.h: sync min, max, min3, max3 macros with Linux

U-Boot has never cared about the type when we get max/min of two
values, but Linux Kernel does. This commit gets min, max, min3, max3
mac

linux/kernel.h: sync min, max, min3, max3 macros with Linux

U-Boot has never cared about the type when we get max/min of two
values, but Linux Kernel does. This commit gets min, max, min3, max3
macros synced with the kernel introducing type checks.

Many of references of those macros must be fixed to suppress warnings.
We have two options:
- Use min, max, min3, max3 only when the arguments have the same type
(or add casts to the arguments)
- Use min_t/max_t instead with the appropriate type for the first
argument

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Pavel Machek <pavel@denx.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
[trini: Fixup arch/blackfin/lib/string.c]
Signed-off-by: Tom Rini <trini@ti.com>

show more ...

sandbox: init cli for -c

sandbox crashes if a variable is set in the -c command, because
hush's top_vars is not allocated. Call cli_init() from sandbox
to ensure this is done before we execute the

sandbox: init cli for -c

sandbox crashes if a variable is set in the -c command, because
hush's top_vars is not allocated. Call cli_init() from sandbox
to ensure this is done before we execute the -c command.

$ ./u-boot -c 'a=1'
...
Segmentation fault (core dumped)

Signed-off-by: Rabin Vincent <rabin@rab.in>
Acked-by: Simon Glass <sjg@chromium.org)
Tested-by: Simon Glass <sjg@chromium.org)

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-arm

sandbox: Support pre-relocation malloc()

Set up and zero global data before board_init_f() is called so that we can
remove the need for CONFIG_SYS_GENERIC_GLOBAL_DATA.

Signed-off-by: Simon Glass <s

sandbox: Support pre-relocation malloc()

Set up and zero global data before board_init_f() is called so that we can
remove the need for CONFIG_SYS_GENERIC_GLOBAL_DATA.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

sandbox: Set up global data before board_init_f()

At present sandbox defines CONFIG_SYS_GENERIC_GLOBAL_DATA, meaning that
the global_data pointer is set up in board_init_f().

If we set up and zero

sandbox: Set up global data before board_init_f()

At present sandbox defines CONFIG_SYS_GENERIC_GLOBAL_DATA, meaning that
the global_data pointer is set up in board_init_f().

If we set up and zero the global data before calling board_init_f() then we
don't need to define CONFIG_SYS_GENERIC_GLOBAL_DATA.

Make this change to simplify the init process.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-arm into master

Conflicts:
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg

Signed-off-by: Stefano Babic

Merge branch 'master' of git://git.denx.de/u-boot-arm into master

Conflicts:
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg

Signed-off-by: Stefano Babic <sbabic@denx.de>

show more ...